In kernel 6.1 the backlight registration code was overhauled so that
at most one backlight device got registered. As part of this change
there was code added to still allow making an acpi_video0 device if the
BIOS contained backlight control methods but no native or vendor drivers
registered.
Even after the overhaul this fallback logic is failing on the BIOS from
a number of motherboard manufacturers supporting Ryzen APUs.
What happens is the amdgpu driver finishes registration and as expected
doesn't create a backlight control device since no eDP panels are connected
to a desktop.
Then 8 seconds later the ACPI video detection code creates an
acpi_video0 device that is non-operational. GNOME then creates a
backlight slider.
To avoid this situation from happening make two sets of changes:
Prevent desktop problems w/ fallback logic
------------------------------------------
1) Add support for the video detect code to let native drivers cancel the
fallback logic if they didn't find a panel.
This is done this way so that if another driver decides that the ACPI
mechanism is still needed it can instead directly call the registration
function.
2) Add code to amdgpu to notify the ACPI video detection code that no panel
was detected on an APU.
Disable fallback logic by default
---------------------------------
This fallback logic was introduced to prevent regressions in the backlight
overhaul. As it has been deemed unnecessary by Hans explicitly disable the
timeout. If this turns out to be mistake and this part is reverted, the
other patches for preventing desktop problems will avoid regressions on
desktops.
Mario Limonciello (3):
ACPI: video: Allow GPU drivers to report no panels
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Don't enable fallback path for creating ACPI backlight by
default
drivers/acpi/acpi_video.c | 17 ++++++++++++-----
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++++
include/acpi/video.h | 1 +
3 files changed, 17 insertions(+), 5 deletions(-)
--
2.34.1
