Hi, Sorry this series was sent to the wrong people / list. I will resend it to the right people now. Please ignore. Regards, Hans On 11/24/22 20:57, Hans de Goede wrote: > Hi All, > > Here is a small set of patches to make the int3472/discrete code > work with the sensor drivers bundled with the (unfortunately out of tree) > IPU6 driver. > > There are parts of the out of tree IPU6 code, like the sensor drivers, > which can be moved to the mainline and I do plan to work on this at some > point and then some of this might need to change. But for now the goal is > to make the out of tree driver work with standard mainline distro kernels > through e.g. dkms. Otherwise users need to run a patched kernel just for > a couple of small differences. > > This is basically a rewrite of this patch: > https://github.com/intel/ipu6-drivers/blob/master/patch/int3472-support-independent-clock-and-LED-gpios-5.17%2B.patch > > Wich users who want to use the IPU6 driver so far have had to manually > apply to their kernels which is quite inconvenient. > > This rewrite makes 2 significant changes: > > 1. Don't break things on IPU3 platforms > > 2. Instead of extending the int3472_sensor_configs[] quirks table for each > model which needs "clken" and "pled" GPIOs, do this based on matching > the ACPI HID of the ACPI device describing the sensor. > > The need for these GPIOs is a property of the specific sensor driver which > binds using this same HID, so by using this we avoid having to extend the > int3472_sensor_configs[] quirks table all the time. > > This allows roling back the behavior to at least use a clk-framework > clk instead of clken GPIO on a per sensor(-driver) basis as we mainline > the sensor drivers, assuming that the drivers are switched over to the > clk framework as part of their mainlining. > > A bigger question is what to do with the privacy-led GPIO on IPU3 > we so far have turned the LED on/off at the same as te clock, > but at least on some IPU6 models this won't work, because they only > have a privacy-led GPIO and no clk_en GPIO (there is no sensor > clk-control at all on some models). > > I think we should maybe move all models, including IPU3 based > models over to using a normal GPIO for controlling the privacy-led > to make things consistent. > > And likewise (eventually) completely drop the "clken" GPIO this > patch series introduces (with some sensors) and instead always model > this through the clk-framework. > > Regards, > > Hans > > > Hans de Goede (3): > platform/x86: int3472/discrete: Refactor GPIO to sensor mapping > platform/x86: int3472/discrete: Get the polarity from the _DSM entry > platform/x86: int3472/discrete: Add support for sensor-drivers which > expect clken + pled GPIOs > > drivers/platform/x86/intel/int3472/common.h | 2 +- > drivers/platform/x86/intel/int3472/discrete.c | 92 ++++++++++++++++--- > 2 files changed, 78 insertions(+), 16 deletions(-) >
