The output port endpoints can be connected to USB-C connectors.
Running drm_of_find_panel_or_bridge() with such endpoints leads to
a continuous return value of -EPROBE_DEFER, even though there is
no panel present.
To avoid this, check for the existence of a "mode-switch" property in
the port endpoint, and skip panel registration completely if so.
Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
---
Changes in v6:
- New in v6
drivers/gpu/drm/bridge/analogix/anx7625.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index b0ff1ecb80a5..b9e3d6ad8846 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1650,7 +1650,7 @@ static int anx7625_get_swing_setting(struct device *dev,
static int anx7625_parse_dt(struct device *dev,
struct anx7625_platform_data *pdata)
{
- struct device_node *np = dev->of_node, *ep0;
+ struct device_node *np = dev->of_node, *ep0, *sw;
int bus_type, mipi_lanes;
anx7625_get_swing_setting(dev, pdata);
@@ -1689,6 +1689,17 @@ static int anx7625_parse_dt(struct device *dev,
if (of_property_read_bool(np, "analogix,audio-enable"))
pdata->audio_en = 1;
+ /*
+ * Don't bother finding a panel if a Type-C `mode-switch` property is
+ * present in one of the endpoints.
+ */
+ for_each_endpoint_of_node(np, sw) {
+ if (of_property_read_bool(sw, "mode-switch")) {
+ of_node_put(sw);
+ return 0;
+ }
+ }
+
pdata->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
if (IS_ERR(pdata->panel_bridge)) {
if (PTR_ERR(pdata->panel_bridge) == -ENODEV) {
--
2.38.1.584.g0f3c55d4c2-goog
