Hello, Following a recommendation from https://bugzilla.kernel.org/show_bug.cgi?id=216709 , I'm posting this here, in the hope that it finds a resolution. # ISSUE DESCRIPTION A few seconds after GNOME is started, the NVME drive that is mounted (but which is not used to boot from) is inacessible. dmesg output is: > [ 281.692677] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, > PCI_STATUS=0x10 > [ 281.778102] nvme 0000:04:00.0: enabling device (0000 -> 0002) > [ 281.778436] nvme nvme0: Removing after probe failure status: -19 > [ 281.797929] nvme0n1: detected capacity change from 3907029168 to 0 > [ 281.797947] blk_update_request: I/O error, dev nvme0n1, sector 2786568960 > op 0x1:(WRITE) flags 0x103000 phys_seg 1 prio class 0 > [ 281.797972] Buffer I/O error on dev nvme0n1p3, logical block 308281696, > lost async page write > [ 281.850852] FAT-fs (nvme0n1p4): unable to read boot sector to mark fs as > dirty > [ 343.901432] EXT4-fs warning (device nvme0n1p3): > htree_dirblock_to_tree:1067: inode #77070337: lblock 0: comm ls: error -5 > reading directory block > [ 343.902354] EXT4-fs error (device nvme0n1p3): __ext4_find_entry:1658: > inode #77070337: comm test-nvme-write: reading directory lblock 0 > [ 350.028540] Aborting journal on device nvme0n1p3-8. > [ 350.028548] Buffer I/O error on dev nvme0n1p3, logical block 223903744, > lost sync page write > [ 350.028554] JBD2: Error -5 detected when updating journal superblock for > nvme0n1p3-8. # WHAT I'VE TRIED (without much luck) - I've managed to install ZorinOS several times on the drive, so the drive works long enough to have everything copied and installed. - On the first 2 Samsung drives, I've managed to install Windows. I did not try with the latest drive. - This is the 3rd drive I'm testing (tried with 2 Samsung 970 EVO plus 2To before, and now with a Seagate FireCuda 530 2To) - I've tried with either kernel parameter pcie_aspm=off or nvme_core.default_ps_max_latency_us=0 and finally with both, but I get the same result in all 3 cases. - I've also tried with various values for nvme_core.default_ps_max_latency_us (starting with 5500) - If I boot from the drive, starting in recovery mode, and resuming normal start, seems to postpone a bit the freeze of the system but only by a few minutes. But it still freezes. # SOFTWARE / HARDWARE - Linux Kernel : 5.15.0-53-generic - Distribution : Zorin OS 16.2 - Motherboard : GIGABYTE B550 AORUS Elite V2 - NVME Drive : Seagate FireCuda 530 2To (latest firmware) - CPU : AMD Ryzen 5700X Thomas.
