On Thu, Oct 27, 2022 at 11:14:58AM +0800, LeoLiu-oc wrote: > From: leoliu-oc <leoliu-oc@xxxxxxxxxxx> > > HEST PCIE AER error source information describes the Uncorrectable Error > Severity, CorrectableError Mask and other aer register's value to write to the > bridge's Correctable Error Mask register. I guess the point is to extract register values from HEST PCI Express AER structures (ACPI r6.5, sec 18.3.2.4, etc.) and program them into AER Capabilities? > leoliu-oc (5): > ACPI/APEI: Add apei_hest_parse_aer() > ACPI/APEI: remove static from apei_hest_parse() > ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges > ACPI/PCI: Add pci_acpi_program_hest_aer_params() > ACPI/PCI: config pcie devices's aer register If/when you repost this, it would be nice if the patches ([1/5], [2/5], etc) were responses to the cover letter ([0/5]). Since they're not responses, b4 doesn't know they're connected and can't grab the whole series at once. Also capitalize the subject lines consistently and s/PCIE/PCIe/ and s/pcie/PCIe/ and s/aer/AER/, e.g., ACPI/APEI: Add apei_hest_parse_aer() ACPI/APEI: Remove static from apei_hest_parse() PCI: Add AER #defines for PCIe/PCI-X bridges ACPI/PCI: Add pci_acpi_program_hest_aer_params() ACPI/PCI: Configure devices AER registers based on HEST > drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++- > drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++ > drivers/pci/pci.h | 5 ++ > drivers/pci/probe.c | 1 + > include/acpi/actbl1.h | 69 +++++++++++++++++++ > include/acpi/apei.h | 9 +++ > include/uapi/linux/pci_regs.h | 5 ++ > 7 files changed, 300 insertions(+), 2 deletions(-) > > -- > 2.20.1 >
