Re: [PATCH AUTOSEL 4.19 06/10] ACPI: video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 10/10/22 01:57, Sasha Levin wrote:
> From: Hans de Goede <hdegoede@xxxxxxxxxx>
> 
> [ Upstream commit c5b94f5b7819348c59f9949b2b75c341a114cdd4 ]
> 
> Some Toshibas have a broken acpi-video interface for brightness control
> and need a special firmware call on resume to turn the panel back on.
> So far these have been using the disable_backlight_sysfs_if workaround
> to deal with this.
> 
> The recent x86/acpi backlight refactoring has broken this workaround:
> 1. This workaround relies on acpi_video_get_backlight_type() returning
>    acpi_video so that the acpi_video code actually runs; and
> 2. this relies on the actual native GPU driver to offer the sysfs
>    backlight interface to userspace.
> 
> After the refactor this breaks since the native driver will no
> longer register its backlight-device if acpi_video_get_backlight_type()
> does not return native and making it return native breaks 1.
> 
> Keeping the acpi_video backlight handling on resume active, while not
> using it to set the brightness, is necessary because it does a _BCM
> call on resume which is necessary to turn the panel back on on resume.
> 
> Looking at the DSDT shows that this _BCM call results in a Toshiba
> HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.
> 
> This kind of special vendor specific handling really belongs in
> the vendor specific acpi driver. An earlier patch in this series
> modifies toshiba_acpi to make the necessary HCI_SET call on resume
> on affected models.
> 
> With toshiba_acpi taking care of the HCI_SET call on resume,
> the acpi_video code no longer needs to call _BCM on resume.
> 
> So instead of using the (now broken) disable_backlight_sysfs_if
> workaround, simply setting acpi_backlight=native to disable
> the broken apci-video interface is sufficient fix things now.
> 
> After this there are no more users of the disable_backlight_sysfs_if
> flag and as discussed above the flag also no longer works as intended,
> so remove the disable_backlight_sysfs_if flag entirely.
> 
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Tested-by: Arvid Norlander <lkml@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

This patch goes hand in hand with:

commit 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")

and without that commit also being present it will cause a regression on
the quirked Toshiba models.

This really is part of the big x86/ACPI backlight handling refactor which 
has landed in 6.1 and as such is not intended for older kernels, please
drop this from the stable series.

Regards,

Hans



> ---
>  drivers/acpi/acpi_video.c   | 48 -------------------------------------
>  drivers/acpi/video_detect.c | 35 +++++++++++++++++++++++++++
>  2 files changed, 35 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
> index ac54fc03cf81..51a9937e6e3e 100644
> --- a/drivers/acpi/acpi_video.c
> +++ b/drivers/acpi/acpi_video.c
> @@ -63,9 +63,6 @@ module_param(brightness_switch_enabled, bool, 0644);
>  static bool allow_duplicates;
>  module_param(allow_duplicates, bool, 0644);
>  
> -static int disable_backlight_sysfs_if = -1;
> -module_param(disable_backlight_sysfs_if, int, 0444);
> -
>  #define REPORT_OUTPUT_KEY_EVENTS		0x01
>  #define REPORT_BRIGHTNESS_KEY_EVENTS		0x02
>  static int report_key_events = -1;
> @@ -397,14 +394,6 @@ static int video_set_bqc_offset(const struct dmi_system_id *d)
>  	return 0;
>  }
>  
> -static int video_disable_backlight_sysfs_if(
> -	const struct dmi_system_id *d)
> -{
> -	if (disable_backlight_sysfs_if == -1)
> -		disable_backlight_sysfs_if = 1;
> -	return 0;
> -}
> -
>  static int video_set_device_id_scheme(const struct dmi_system_id *d)
>  {
>  	device_id_scheme = true;
> @@ -477,40 +466,6 @@ static const struct dmi_system_id video_dmi_table[] = {
>  		},
>  	},
>  
> -	/*
> -	 * Some machines have a broken acpi-video interface for brightness
> -	 * control, but still need an acpi_video_device_lcd_set_level() call
> -	 * on resume to turn the backlight power on.  We Enable backlight
> -	 * control on these systems, but do not register a backlight sysfs
> -	 * as brightness control does not work.
> -	 */
> -	{
> -	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
> -	 .callback = video_disable_backlight_sysfs_if,
> -	 .ident = "Toshiba Portege R700",
> -	 .matches = {
> -		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> -		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
> -		},
> -	},
> -	{
> -	 /* https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
> -	 .callback = video_disable_backlight_sysfs_if,
> -	 .ident = "Toshiba Portege R830",
> -	 .matches = {
> -		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> -		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R830"),
> -		},
> -	},
> -	{
> -	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
> -	 .callback = video_disable_backlight_sysfs_if,
> -	 .ident = "Toshiba Satellite R830",
> -	 .matches = {
> -		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> -		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE R830"),
> -		},
> -	},
>  	/*
>  	 * Some machine's _DOD IDs don't have bit 31(Device ID Scheme) set
>  	 * but the IDs actually follow the Device ID Scheme.
> @@ -1773,9 +1728,6 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
>  	if (result)
>  		return;
>  
> -	if (disable_backlight_sysfs_if > 0)
> -		return;
> -
>  	name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
>  	if (!name)
>  		return;
> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
> index 490ae990bd3c..62975cfcce68 100644
> --- a/drivers/acpi/video_detect.c
> +++ b/drivers/acpi/video_detect.c
> @@ -447,6 +447,41 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
>  		DMI_MATCH(DMI_BOARD_NAME, "PF5LUXG"),
>  		},
>  	},
> +	/*
> +	 * These Toshibas have a broken acpi-video interface for brightness
> +	 * control. They also have an issue where the panel is off after
> +	 * suspend until a special firmware call is made to turn it back
> +	 * on. This is handled by the toshiba_acpi kernel module, so that
> +	 * module must be enabled for these models to work correctly.
> +	 */
> +	{
> +	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
> +	 .callback = video_detect_force_native,
> +	 /* Toshiba Portégé R700 */
> +	 .matches = {
> +		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> +		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
> +		},
> +	},
> +	{
> +	 /* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
> +	 /* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
> +	 .callback = video_detect_force_native,
> +	 /* Toshiba Satellite/Portégé R830 */
> +	 .matches = {
> +		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> +		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
> +		},
> +	},
> +	{
> +	 .callback = video_detect_force_native,
> +	 /* Toshiba Satellite/Portégé Z830 */
> +	 .matches = {
> +		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> +		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
> +		},
> +	},
> +
>  	/*
>  	 * Desktops which falsely report a backlight and which our heuristics
>  	 * for this do not catch.




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux