Re: [PATCH V5 1/2] ACPI / scan: Support multiple dma windows with different offsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 13, 2022 at 10:21 AM Lorenzo Pieralisi
<lpieralisi@xxxxxxxxxx> wrote:
>
> On Sun, Sep 11, 2022 at 05:06:34PM +0800, Jianmin Lv wrote:
> > In DT systems configurations, of_dma_get_range() returns struct
> > bus_dma_region DMA regions; they are used to set-up devices
> > DMA windows with different offset available for translation between DMA
> > address and CPU address.
> >
> > In ACPI systems configuration, acpi_dma_get_range() does not return
> > DMA regions yet and that precludes setting up the dev->dma_range_map
> > pointer and therefore DMA regions with multiple offsets.
> >
> > Update acpi_dma_get_range() to return struct bus_dma_region
> > DMA regions like of_dma_get_range() does.
> >
> > After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
> > ARM64, where the original dma_addr and size are removed as these
> > arguments are now redundant, and pass 0 and U64_MAX for dma_base
> > and size of arch_setup_dma_ops; this is a simplification consistent
> > with what other ACPI architectures also pass to iommu_setup_dma_ops().
> >
> > Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
> > Signed-off-by: Jianmin Lv <lvjianmin@xxxxxxxxxxx>
> > ---
> >  drivers/acpi/arm64/dma.c | 28 ++++++++++++---------
> >  drivers/acpi/scan.c      | 53 +++++++++++++++++-----------------------
> >  include/acpi/acpi_bus.h  |  3 +--
> >  include/linux/acpi.h     |  7 +++---
> >  4 files changed, 44 insertions(+), 47 deletions(-)
>
> Reviewed-by: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>

Applied as 6.1 material along with the [2/2], thanks!

> > diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
> > index f16739ad3cc0..93d796531af3 100644
> > --- a/drivers/acpi/arm64/dma.c
> > +++ b/drivers/acpi/arm64/dma.c
> > @@ -4,11 +4,12 @@
> >  #include <linux/device.h>
> >  #include <linux/dma-direct.h>
> >
> > -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> > +void acpi_arch_dma_setup(struct device *dev)
> >  {
> >       int ret;
> >       u64 end, mask;
> > -     u64 dmaaddr = 0, size = 0, offset = 0;
> > +     u64 size = 0;
> > +     const struct bus_dma_region *map = NULL;
> >
> >       /*
> >        * If @dev is expected to be DMA-capable then the bus code that created
> > @@ -26,7 +27,19 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> >       else
> >               size = 1ULL << 32;
> >
> > -     ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
> > +     ret = acpi_dma_get_range(dev, &map);
> > +     if (!ret && map) {
> > +             const struct bus_dma_region *r = map;
> > +
> > +             for (end = 0; r->size; r++) {
> > +                     if (r->dma_start + r->size - 1 > end)
> > +                             end = r->dma_start + r->size - 1;
> > +             }
> > +
> > +             size = end + 1;
> > +             dev->dma_range_map = map;
> > +     }
> > +
> >       if (ret == -ENODEV)
> >               ret = iort_dma_get_ranges(dev, &size);
> >       if (!ret) {
> > @@ -34,17 +47,10 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> >                * Limit coherent and dma mask based on size retrieved from
> >                * firmware.
> >                */
> > -             end = dmaaddr + size - 1;
> > +             end = size - 1;
> >               mask = DMA_BIT_MASK(ilog2(end) + 1);
> >               dev->bus_dma_limit = end;
> >               dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
> >               *dev->dma_mask = min(*dev->dma_mask, mask);
> >       }
> > -
> > -     *dma_addr = dmaaddr;
> > -     *dma_size = size;
> > -
> > -     ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
> > -
> > -     dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
> >  }
> > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> > index 42cec8120f18..f96ef8536037 100644
> > --- a/drivers/acpi/scan.c
> > +++ b/drivers/acpi/scan.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/platform_data/x86/apple.h>
> >  #include <linux/pgtable.h>
> >  #include <linux/crc32.h>
> > +#include <linux/dma-direct.h>
> >
> >  #include "internal.h"
> >
> > @@ -1467,25 +1468,21 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> >   * acpi_dma_get_range() - Get device DMA parameters.
> >   *
> >   * @dev: device to configure
> > - * @dma_addr: pointer device DMA address result
> > - * @offset: pointer to the DMA offset result
> > - * @size: pointer to DMA range size result
> > + * @map: pointer to DMA ranges result
> >   *
> > - * Evaluate DMA regions and return respectively DMA region start, offset
> > - * and size in dma_addr, offset and size on parsing success; it does not
> > - * update the passed in values on failure.
> > + * Evaluate DMA regions and return pointer to DMA regions on
> > + * parsing success; it does not update the passed in values on failure.
> >   *
> >   * Return 0 on success, < 0 on failure.
> >   */
> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -                    u64 *size)
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >  {
> >       struct acpi_device *adev;
> >       LIST_HEAD(list);
> >       struct resource_entry *rentry;
> >       int ret;
> >       struct device *dma_dev = dev;
> > -     u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> > +     struct bus_dma_region *r;
> >
> >       /*
> >        * Walk the device tree chasing an ACPI companion with a _DMA
> > @@ -1510,31 +1507,28 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> >
> >       ret = acpi_dev_get_dma_resources(adev, &list);
> >       if (ret > 0) {
> > +             r = kcalloc(ret + 1, sizeof(*r), GFP_KERNEL);
> > +             if (!r) {
> > +                     ret = -ENOMEM;
> > +                     goto out;
> > +             }
> > +
> >               list_for_each_entry(rentry, &list, node) {
> > -                     if (dma_offset && rentry->offset != dma_offset) {
> > +                     if (rentry->res->start >= rentry->res->end) {
> > +                             kfree(r);
> >                               ret = -EINVAL;
> > -                             dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
> > +                             dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> >                               goto out;
> >                       }
> > -                     dma_offset = rentry->offset;
> >
> > -                     /* Take lower and upper limits */
> > -                     if (rentry->res->start < dma_start)
> > -                             dma_start = rentry->res->start;
> > -                     if (rentry->res->end > dma_end)
> > -                             dma_end = rentry->res->end;
> > -             }
> > -
> > -             if (dma_start >= dma_end) {
> > -                     ret = -EINVAL;
> > -                     dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> > -                     goto out;
> > +                     r->cpu_start = rentry->res->start;
> > +                     r->dma_start = rentry->res->start - rentry->offset;
> > +                     r->size = resource_size(rentry->res);
> > +                     r->offset = rentry->offset;
> > +                     r++;
> >               }
> >
> > -             *dma_addr = dma_start - dma_offset;
> > -             len = dma_end - dma_start;
> > -             *size = max(len, len + 1);
> > -             *offset = dma_offset;
> > +             *map = r;
> >       }
> >   out:
> >       acpi_dev_free_resource_list(&list);
> > @@ -1624,20 +1618,19 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >                         const u32 *input_id)
> >  {
> >       const struct iommu_ops *iommu;
> > -     u64 dma_addr = 0, size = 0;
> >
> >       if (attr == DEV_DMA_NOT_SUPPORTED) {
> >               set_dma_ops(dev, &dma_dummy_ops);
> >               return 0;
> >       }
> >
> > -     acpi_arch_dma_setup(dev, &dma_addr, &size);
> > +     acpi_arch_dma_setup(dev);
> >
> >       iommu = acpi_iommu_configure_id(dev, input_id);
> >       if (PTR_ERR(iommu) == -EPROBE_DEFER)
> >               return -EPROBE_DEFER;
> >
> > -     arch_setup_dma_ops(dev, dma_addr, size,
> > +     arch_setup_dma_ops(dev, 0, U64_MAX,
> >                               iommu, attr == DEV_DMA_COHERENT);
> >
> >       return 0;
> > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> > index e7d27373ff71..73ac4a1d6947 100644
> > --- a/include/acpi/acpi_bus.h
> > +++ b/include/acpi/acpi_bus.h
> > @@ -613,8 +613,7 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> >  int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> >                          struct fwnode_handle *fwnode,
> >                          const struct iommu_ops *ops);
> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -                    u64 *size);
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
> >  int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >                          const u32 *input_id);
> >  static inline int acpi_dma_configure(struct device *dev,
> > diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> > index 6f64b2f3dc54..bb41623dab77 100644
> > --- a/include/linux/acpi.h
> > +++ b/include/linux/acpi.h
> > @@ -281,12 +281,12 @@ void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
> >
> >  #ifdef CONFIG_ARM64
> >  void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
> > -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
> > +void acpi_arch_dma_setup(struct device *dev);
> >  #else
> >  static inline void
> >  acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
> >  static inline void
> > -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
> > +acpi_arch_dma_setup(struct device *dev) { }
> >  #endif
> >
> >  int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
> > @@ -977,8 +977,7 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> >       return DEV_DMA_NOT_SUPPORTED;
> >  }
> >
> > -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
> > -                                  u64 *offset, u64 *size)
> > +static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >  {
> >       return -ENODEV;
> >  }
> > --
> > 2.31.1
> >



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux