[PATCH v3 1/3] ACPI: PMIC: Use sizeof() instead of hard coded value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's better to use sizeof() of a given buffer than spreading
a hard coded value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
v3: added tag (Mika)
 drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 2 +-
 drivers/acpi/pmic/intel_pmic_xpower.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
index 418eec523025..6c2a6da430ed 100644
--- a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
+++ b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
@@ -87,7 +87,7 @@ static int chtdc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg)
 {
 	u8 buf[2];
 
-	if (regmap_bulk_read(regmap, reg, buf, 2))
+	if (regmap_bulk_read(regmap, reg, buf, sizeof(buf)))
 		return -EIO;
 
 	/* stored in big-endian */
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
index 61bbe4c24d87..33c5e85294cd 100644
--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -255,7 +255,7 @@ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2);
+	ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, sizeof(buf));
 	if (ret == 0)
 		ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f);
 
-- 
2.35.1




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux