Bug: Re: [PATCH v3] ACPI: Split out processor thermal register from ACPI PSS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 6/16/22 21:51, Riwen Lu wrote:
From: Riwen Lu <luriwen@xxxxxxxxxx>

Commit 239708a3af44 ("ACPI: Split out ACPI PSS from ACPI Processor
driver"), moves processor thermal registration to acpi_pss_perf_init(),
which doesn't get executed if ACPI_CPU_FREQ_PSS is not enabled.

As ARM64 supports P-states using CPPC, it should be possible to also
support processor passive cooling even if PSS is not enabled. Split
out the processor thermal cooling register from ACPI PSS to support
this, and move it into a separate function in processor_thermal.c.

It appears this commit 7fdc74da940d ACPI: processor: Split out thermal initialization from ACPI PSS

Is causing the following:
   41.341659] ------------[ cut here ]------------
[   41.346280] freq_qos_remove_request() called for unknown object
[ 41.352251] WARNING: CPU: 3 PID: 1089 at kernel/power/qos.c:597 freq_qos_remove_request+0xa4/0xc4 [ 41.361152] Modules linked in: nf_nat_tftp nft_objref nf_conntrack_tftp nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep sunrpc vfat fat btsdio brcmfmac hci_uart btqca cfg80211 bs
[   41.413245] CPU: 3 PID: 1089 Comm: rmmod Not tainted 6.0.0-rc1MINI+ #237
[ 41.419951] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 07/18/2022 [ 41.430990] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   41.437955] pc : freq_qos_remove_request+0xa4/0xc4
[   41.442752] lr : freq_qos_remove_request+0xa4/0xc4
[   41.447550] sp : ffff80000a4bbb60
[ 41.450862] x29: ffff80000a4bbb60 x28: ffff07858798a1c0 x27: 0000000000000000 [ 41.458012] x26: 0000000000000000 x25: ffffdf6ade80f850 x24: ffff07858b07d200 [ 41.465158] x23: ffffdf6ade812cb0 x22: ffff07858b07d000 x21: ffffdf6ade80f850 [ 41.472303] x20: ffffdf6ade26b998 x19: ffff0785809ba5a8 x18: ffffffffffffffff [ 41.479447] x17: 0000000000000000 x16: ffffdf6adcc25320 x15: 0000000000000006 [ 41.486592] x14: 0000000000000000 x13: 7463656a626f206e x12: 776f6e6b6e752072 [ 41.493736] x11: 00000000ffffdfff x10: ffffdf6ade8fd520 x9 : ffffdf6adcae53ac [ 41.500881] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001 [ 41.508026] x5 : 0000000000000000 x4 : ffff07863b7ac450 x3 : ffff07863b7b8bb0 [ 41.515170] x2 : 0000000000000001 x1 : ffff281b5d54f000 x0 : 0000000000000033
[   41.522315] Call trace:
[   41.524759]  freq_qos_remove_request+0xa4/0xc4
[   41.529210]  acpi_thermal_cpufreq_exit+0x90/0xb0
[   41.533834]  acpi_processor_notifier+0x74/0x90
[   41.538281]  blocking_notifier_call_chain+0x78/0xb0
[   41.543161]  cpufreq_policy_free+0x154/0x1e0
[   41.547438]  cpufreq_remove_dev+0xc0/0x10c
[   41.551538]  subsys_interface_unregister+0xf0/0xfc
[   41.556335]  cpufreq_unregister_driver+0x54/0x120
[   41.561043]  cppc_cpufreq_exit+0x28/0xd2c [cppc_cpufreq]
[   41.566370]  __do_sys_delete_module.constprop.0+0x150/0x2bc
[   41.571947]  __arm64_sys_delete_module+0x20/0x30
[   41.576567]  invoke_syscall+0x50/0x120
[   41.580318]  el0_svc_common.constprop.0+0x4c/0xf4
[   41.585023]  do_el0_svc+0x38/0x4c
[   41.588338]  el0_svc+0x34/0xdc
[   41.591394]  el0t_64_sync_handler+0x11c/0x150
[   41.595752]  el0t_64_sync+0x190/0x194
[   41.599416] ---[ end trace 0000000000000000 ]---

When the cppc_cpufreq driver is rmmod'ed from a running machine that has both CPPC and a thermal zone. I reverted and bisected it, and in both cases the splat above goes away.


Thanks,


Signed-off-by: Riwen Lu <luriwen@xxxxxxxxxx>

---
v1 -> v2:
  - Reword the commit message.
  - Update the signature of acpi_pss_perf_init() to void, and remove the
    acpi_device parameter.
  - Move the processor thermal register/remove into a separate function in
    processor_thermal.c.

v2 -> v3:
  - Remove the "pr" NULL check in processor thermal init/exit fuction.
  - Pass the acpi_device into processor thermal init/exit, and remove the
    convert in it.
---
  drivers/acpi/Kconfig             |  2 +-
  drivers/acpi/Makefile            |  5 +--
  drivers/acpi/processor_driver.c  | 72 ++++----------------------------
  drivers/acpi/processor_thermal.c | 54 ++++++++++++++++++++++++
  include/acpi/processor.h         |  8 +++-
  5 files changed, 71 insertions(+), 70 deletions(-)

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 1e34f846508f..2457ade3f82d 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -255,7 +255,6 @@ config ACPI_DOCK
config ACPI_CPU_FREQ_PSS
  	bool
-	select THERMAL
config ACPI_PROCESSOR_CSTATE
  	def_bool y
@@ -287,6 +286,7 @@ config ACPI_PROCESSOR
  	depends on X86 || IA64 || ARM64 || LOONGARCH
  	select ACPI_PROCESSOR_IDLE
  	select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH
+	select THERMAL
  	default y
  	help
  	  This driver adds support for the ACPI Processor package. It is required
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index b5a8d3e00a52..0002eecbf870 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -109,10 +109,9 @@ obj-$(CONFIG_ACPI_PPTT) 	+= pptt.o
  obj-$(CONFIG_ACPI_PFRUT)	+= pfr_update.o pfr_telemetry.o
# processor has its own "processor." module_param namespace
-processor-y			:= processor_driver.o
+processor-y			:= processor_driver.o processor_thermal.o
  processor-$(CONFIG_ACPI_PROCESSOR_IDLE) += processor_idle.o
-processor-$(CONFIG_ACPI_CPU_FREQ_PSS)	+= processor_throttling.o	\
-	processor_thermal.o
+processor-$(CONFIG_ACPI_CPU_FREQ_PSS)	+= processor_throttling.o
  processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 368a9edefd0c..1278969eec1f 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -139,75 +139,17 @@ static int acpi_soft_cpu_dead(unsigned int cpu)
  }
#ifdef CONFIG_ACPI_CPU_FREQ_PSS
-static int acpi_pss_perf_init(struct acpi_processor *pr,
-		struct acpi_device *device)
+static void acpi_pss_perf_init(struct acpi_processor *pr)
  {
-	int result = 0;
-
  	acpi_processor_ppc_has_changed(pr, 0);
acpi_processor_get_throttling_info(pr); if (pr->flags.throttling)
  		pr->flags.limit = 1;
-
-	pr->cdev = thermal_cooling_device_register("Processor", device,
-						   &processor_cooling_ops);
-	if (IS_ERR(pr->cdev)) {
-		result = PTR_ERR(pr->cdev);
-		return result;
-	}
-
-	dev_dbg(&device->dev, "registered as cooling_device%d\n",
-		pr->cdev->id);
-
-	result = sysfs_create_link(&device->dev.kobj,
-				   &pr->cdev->device.kobj,
-				   "thermal_cooling");
-	if (result) {
-		dev_err(&device->dev,
-			"Failed to create sysfs link 'thermal_cooling'\n");
-		goto err_thermal_unregister;
-	}
-
-	result = sysfs_create_link(&pr->cdev->device.kobj,
-				   &device->dev.kobj,
-				   "device");
-	if (result) {
-		dev_err(&pr->cdev->device,
-			"Failed to create sysfs link 'device'\n");
-		goto err_remove_sysfs_thermal;
-	}
-
-	return 0;
-
- err_remove_sysfs_thermal:
-	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
- err_thermal_unregister:
-	thermal_cooling_device_unregister(pr->cdev);
-
-	return result;
-}
-
-static void acpi_pss_perf_exit(struct acpi_processor *pr,
-		struct acpi_device *device)
-{
-	if (pr->cdev) {
-		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-		sysfs_remove_link(&pr->cdev->device.kobj, "device");
-		thermal_cooling_device_unregister(pr->cdev);
-		pr->cdev = NULL;
-	}
  }
  #else
-static inline int acpi_pss_perf_init(struct acpi_processor *pr,
-		struct acpi_device *device)
-{
-	return 0;
-}
-
-static inline void acpi_pss_perf_exit(struct acpi_processor *pr,
-		struct acpi_device *device) {}
+static inline void acpi_pss_perf_init(struct acpi_processor *pr) {}
  #endif /* CONFIG_ACPI_CPU_FREQ_PSS */
static int __acpi_processor_start(struct acpi_device *device)
@@ -229,7 +171,9 @@ static int __acpi_processor_start(struct acpi_device *device)
  	if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver)
  		acpi_processor_power_init(pr);
- result = acpi_pss_perf_init(pr, device);
+	acpi_pss_perf_init(pr);
+
+	result = acpi_processor_thermal_init(pr, device);
  	if (result)
  		goto err_power_exit;
@@ -239,7 +183,7 @@ static int __acpi_processor_start(struct acpi_device *device)
  		return 0;
result = -ENODEV;
-	acpi_pss_perf_exit(pr, device);
+	acpi_processor_thermal_exit(pr, device);
err_power_exit:
  	acpi_processor_power_exit(pr);
@@ -277,10 +221,10 @@ static int acpi_processor_stop(struct device *dev)
  		return 0;
  	acpi_processor_power_exit(pr);
- acpi_pss_perf_exit(pr, device);
-
  	acpi_cppc_processor_exit(pr);
+ acpi_processor_thermal_exit(pr, device);
+
  	return 0;
  }
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index d8b2dfcd59b5..db6ac540e924 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -266,3 +266,57 @@ const struct thermal_cooling_device_ops processor_cooling_ops = {
  	.get_cur_state = processor_get_cur_state,
  	.set_cur_state = processor_set_cur_state,
  };
+
+int acpi_processor_thermal_init(struct acpi_processor *pr,
+				struct acpi_device *device)
+{
+	int result = 0;
+
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						   &processor_cooling_ops);
+	if (IS_ERR(pr->cdev)) {
+		result = PTR_ERR(pr->cdev);
+		return result;
+	}
+
+	dev_dbg(&device->dev, "registered as cooling_device%d\n",
+		pr->cdev->id);
+
+	result = sysfs_create_link(&device->dev.kobj,
+				   &pr->cdev->device.kobj,
+				   "thermal_cooling");
+	if (result) {
+		dev_err(&device->dev,
+			"Failed to create sysfs link 'thermal_cooling'\n");
+		goto err_thermal_unregister;
+	}
+
+	result = sysfs_create_link(&pr->cdev->device.kobj,
+				   &device->dev.kobj,
+				   "device");
+	if (result) {
+		dev_err(&pr->cdev->device,
+			"Failed to create sysfs link 'device'\n");
+		goto err_remove_sysfs_thermal;
+	}
+
+	return 0;
+
+err_remove_sysfs_thermal:
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+	thermal_cooling_device_unregister(pr->cdev);
+
+	return result;
+}
+
+void acpi_processor_thermal_exit(struct acpi_processor *pr,
+				 struct acpi_device *device)
+{
+	if (pr->cdev) {
+		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+		sysfs_remove_link(&pr->cdev->device.kobj, "device");
+		thermal_cooling_device_unregister(pr->cdev);
+		pr->cdev = NULL;
+	}
+}
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 194027371928..ba1e3ed98d3d 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -442,8 +442,12 @@ static inline int acpi_processor_hotplug(struct acpi_processor *pr)
/* in processor_thermal.c */
  int acpi_processor_get_limit_info(struct acpi_processor *pr);
+int acpi_processor_thermal_init(struct acpi_processor *pr,
+				struct acpi_device *device);
+void acpi_processor_thermal_exit(struct acpi_processor *pr,
+				 struct acpi_device *device);
  extern const struct thermal_cooling_device_ops processor_cooling_ops;
-#if defined(CONFIG_ACPI_CPU_FREQ_PSS) & defined(CONFIG_CPU_FREQ)
+#ifdef CONFIG_CPU_FREQ
  void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy);
  void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy);
  #else
@@ -455,6 +459,6 @@ static inline void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy)
  {
  	return;
  }
-#endif	/* CONFIG_ACPI_CPU_FREQ_PSS */
+#endif	/* CONFIG_CPU_FREQ */
#endif




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux