[PATCH v2 27/29] ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



acpi_backlight=native is the default for these, but as the comment
explains the quirk was still necessary because even briefly registering
the acpi_video0 backlight; and then unregistering it once the native
driver showed up, was leading to issues.

After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.

So this is no longer an issue an the quirks are no longer needed.

Cc: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/acpi/video_detect.c | 75 -------------------------------------
 1 file changed, 75 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 2a4d376a703e..4b9395d1bda7 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -599,81 +599,6 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
 		},
 	},
-	/*
-	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
-	 * working native and video interface. However the default detection
-	 * mechanism first registers the video interface before unregistering
-	 * it again and switching to the native interface during boot. This
-	 * results in a dangling SBIOS request for backlight change for some
-	 * reason, causing the backlight to switch to ~2% once per boot on the
-	 * first power cord connect or disconnect event. Setting the native
-	 * interface explicitly circumvents this buggy behaviour, by avoiding
-	 * the unregistering process.
-	 */
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
 
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics
-- 
2.36.0




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux