On Wed, Jun 22, 2022 at 11:24:07AM +0200, Andrew Lunn wrote:
> On Wed, Jun 22, 2022 at 11:08:13AM +0200, Marcin Wojtas wrote:
> > wt., 21 cze 2022 o 13:42 Andy Shevchenko
> > <andriy.shevchenko@xxxxxxxxxxxxxxx> napisał(a):
> > > On Tue, Jun 21, 2022 at 01:18:38PM +0200, Andrew Lunn wrote:
> > > > On Tue, Jun 21, 2022 at 02:09:14PM +0300, Andy Shevchenko wrote:
> > > > > On Mon, Jun 20, 2022 at 09:47:31PM +0200, Andrew Lunn wrote:
...
> > > > > > > + Memory32Fixed (ReadWrite,
> > > > > > > + 0xf212a200,
> > > > > > > + 0x00000010,
> > > > > >
> > > > > > What do these magic numbers mean?
> > > > >
> > > > > Address + Length, it's all described in the ACPI specification.
> > > >
> > > > The address+plus length of what? This device is on an MDIO bus. As
> > > > such, there is no memory! It probably makes sense to somebody who
> > > > knows ACPI, but to me i have no idea what it means.
> > >
> > > I see what you mean. Honestly I dunno what the device this description is for.
> > > For the DSA that's behind MDIO bus? Then it's definitely makes no sense and
> > > MDIOSerialBus() resources type is what would be good to have in ACPI
> > > specification.
> >
> > It's not device on MDIO bus, but the MDIO controller's register itself
>
> Ah. So this is equivalent to
>
> CP11X_LABEL(mdio): mdio@12a200 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "marvell,orion-mdio";
> reg = <0x12a200 0x10>;
> clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
> <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
> status = "disabled";
> };
>
> DT seems a lot more readable, "marvell,orion-mdio" is a good hint that
> device this is. But maybe it is more readable because that is what i'm
> used to.
In ACPI we have _HID and _DDN. _DDN may put a descriptive string.
> Please could you add a lot more comments. Given that nobody currently
> actually does networking via ACPI, we have to assume everybody trying
> to use it is a newbie, and more comments are better than less.
--
With Best Regards,
Andy Shevchenko
