Thank you Sebastian!
-----Original Message-----
From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Sent: Friday, June 17, 2022 11:35 AM
To: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx
Subject: Re: [PATCH v2 1/1] Support power control driver for BlueField SoCs.
Hi,
On Tue, Jun 14, 2022 at 10:19:11AM -0400, Asmaa Mnebhi wrote:
> This patch supports handling 2 BlueField power states controlled by GPIO interrupts:
> 1) chip reset and
> 2) low power mode
>
> This driver is dependent and should be loaded after the gpio-mlxbf2.c
> driver, which is the gpio and interrupt controller.
>
> Changes made since v1 patch:
> - use dev_err_probe
> - use devm_work_autocancel
> - fix sizeof() in devm_kzalloc
>
> Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
> ---
Thanks, I queued this into power-supply's for-next branch. I modified the commit message a bit. Please follow the common style (e.g. Changes are documented below ---, patch subject should be prefixed with the subsystem).
-- Sebastian
> drivers/power/reset/Kconfig | 6 ++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/pwr-mlxbf.c | 97
> +++++++++++++++++++++++++++++++++
> 3 files changed, 104 insertions(+)
> create mode 100644 drivers/power/reset/pwr-mlxbf.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 4b563db3ab3e..a8c46ba5878f 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -297,4 +297,10 @@ config NVMEM_REBOOT_MODE
> then the bootloader can read it and take different
> action according to the mode.
>
> +config POWER_MLXBF
> + tristate "Mellanox BlueField power handling driver"
> + depends on (GPIO_MLXBF2 && ACPI)
> + help
> + This driver supports reset or low power mode handling for Mellanox BlueField.
> +
> endif
> diff --git a/drivers/power/reset/Makefile
> b/drivers/power/reset/Makefile index f606a2f60539..0a39424fc558 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -35,3 +35,4 @@ obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
> obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
> obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
> obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
> +obj-$(CONFIG_POWER_MLXBF) += pwr-mlxbf.o
> diff --git a/drivers/power/reset/pwr-mlxbf.c
> b/drivers/power/reset/pwr-mlxbf.c new file mode 100644 index
> 000000000000..c1f9987834a2
> --- /dev/null
> +++ b/drivers/power/reset/pwr-mlxbf.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause
> +
> +/*
> + * Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/reboot.h>
> +#include <linux/types.h>
> +
> +const char *rst_pwr_hid = "MLNXBF24"; const char *low_pwr_hid =
> +"MLNXBF29";
> +
> +struct pwr_mlxbf {
> + struct work_struct send_work;
> + const char *hid;
> +};
> +
> +static void pwr_mlxbf_send_work(struct work_struct *work) {
> + acpi_bus_generate_netlink_event("button/power.*", "Power Button",
> +0x80, 1); }
> +
> +static irqreturn_t pwr_mlxbf_irq(int irq, void *ptr) {
> + struct pwr_mlxbf *priv = ptr;
> +
> + if (!strncmp(priv->hid, rst_pwr_hid, 8))
> + emergency_restart();
> +
> + if (!strncmp(priv->hid, low_pwr_hid, 8))
> + schedule_work(&priv->send_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int pwr_mlxbf_probe(struct platform_device *pdev) {
> + struct device *dev = &pdev->dev;
> + struct acpi_device *adev;
> + struct pwr_mlxbf *priv;
> + const char *hid;
> + int irq, err;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + adev = ACPI_COMPANION(dev);
> + if (!adev)
> + return -ENXIO;
> +
> + hid = acpi_device_hid(adev);
> + priv->hid = hid;
> +
> + irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
> + if (irq < 0)
> + return dev_err_probe(dev, irq, "Error getting %s irq.\n",
> +priv->hid);
> +
> + err = devm_work_autocancel(dev, &priv->send_work, pwr_mlxbf_send_work);
> + if (err)
> + return err;
> +
> + err = devm_request_irq(dev, irq, pwr_mlxbf_irq, 0, hid, priv);
> + if (err)
> + dev_err(dev, "Failed request of %s irq\n", priv->hid);
> +
> + return err;
> +}
> +
> +static const struct acpi_device_id __maybe_unused pwr_mlxbf_acpi_match[] = {
> + { "MLNXBF24", 0 },
> + { "MLNXBF29", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, pwr_mlxbf_acpi_match);
> +
> +static struct platform_driver pwr_mlxbf_driver = {
> + .driver = {
> + .name = "pwr_mlxbf",
> + .acpi_match_table = pwr_mlxbf_acpi_match,
> + },
> + .probe = pwr_mlxbf_probe,
> +};
> +
> +module_platform_driver(pwr_mlxbf_driver);
> +
> +MODULE_DESCRIPTION("Mellanox BlueField power driver");
> +MODULE_AUTHOR("Asmaa Mnebhi <asmaa@xxxxxxxxxx>");
> +MODULE_LICENSE("Dual BSD/GPL");
> --
> 2.30.1
>
