[PATCH 1/3 v2] Docs: admin/kernel-parameters: edit a few boot options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Clean up some of admin-guide/kernel-parameters.txt:

a. "smt" should be "smt=" (S390)
b. (dropped)
c. Sparc supports the vdso= boot option
d. make the tp_printk options (2) formatting similar to other options
   by adding spacing
e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst
f. use [IA-64] as documented instead of [ia64]
g. fix formatting and text for test_suspend=
h. fix formatting for swapaccount=
i. fix formatting and grammar for video.brightness_switch_enabled=

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Heiko Carstens <hca@xxxxxxxxxxxxx>
Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Cc: Alexander Gordeev <agordeev@xxxxxxxxxxxxx>
Cc: Christian Borntraeger <borntraeger@xxxxxxxxxxxxx>
Cc: Sven Schnelle <svens@xxxxxxxxxxxxx>
Cc: linux-s390@xxxxxxxxxxxxxxx
Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: sparclinux@xxxxxxxxxxxxxxx
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: linux-ia64@xxxxxxxxxxxxxxx
Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Len Brown <lenb@xxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-acpi@xxxxxxxxxxxxxxx
Cc: Johannes Weiner <hannes@xxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: linux-doc@xxxxxxxxxxxxxxx
---
v2: drop "smt-enabled" for arch/powerpc/ (Michael)

 Documentation/admin-guide/kernel-parameters.txt |   27 ++++++++------
 1 file changed, 16 insertions(+), 11 deletions(-)

--- linux-next-20220331.orig/Documentation/admin-guide/kernel-parameters.txt
+++ linux-next-20220331/Documentation/admin-guide/kernel-parameters.txt
@@ -2814,7 +2814,7 @@
 			different yeeloong laptops.
 			Example: machtype=lemote-yeeloong-2f-7inch
 
-	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
+	max_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory greater
 			than or equal to this physical address is ignored.
 
 	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
@@ -3057,7 +3057,7 @@
 
 	mga=		[HW,DRM]
 
-	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
+	min_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory below this
 			physical address is ignored.
 
 	mini2440=	[ARM,HW,KNL]
@@ -5388,7 +5388,7 @@
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	smt		[KNL,S390] Set the maximum number of threads (logical
+	smt=		[KNL,S390] Set the maximum number of threads (logical
 			CPUs) to use per physical CPU on systems capable of
 			symmetric multithreading (SMT). Will be capped to the
 			actual hardware limit.
@@ -5774,8 +5774,9 @@
 			This parameter controls use of the Protected
 			Execution Facility on pSeries.
 
-	swapaccount=[0|1]
-			[KNL] Enable accounting of swap in memory resource
+	swapaccount=	[KNL]
+			Format: [0|1]
+			Enable accounting of swap in memory resource
 			controller if no parameter or 1 is given or disable
 			it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
 
@@ -5821,7 +5822,8 @@
 
 	tdfx=		[HW,DRM]
 
-	test_suspend=	[SUSPEND][,N]
+	test_suspend=	[SUSPEND]
+			Format: { "mem" | "standby" | "freeze" }[,N]
 			Specify "mem" (for Suspend-to-RAM) or "standby" (for
 			standby suspend) or "freeze" (for suspend type freeze)
 			as the system sleep state during system startup with
@@ -5908,6 +5910,8 @@
 	trace_buf_size=nn[KMG]
 			[FTRACE] will set tracing buffer size on each cpu.
 
+	trace_clock=	[FTRACE] See Documentation/trace/ftrace.rst
+
 	trace_event=[event-list]
 			[FTRACE] Set and start specified trace events in order
 			to facilitate early boot debugging. The event-list is a
@@ -5930,7 +5934,7 @@
 			See also Documentation/trace/ftrace.rst "trace options"
 			section.
 
-	tp_printk[FTRACE]
+	tp_printk	[FTRACE]
 			Have the tracepoints sent to printk as well as the
 			tracing ring buffer. This is useful for early boot up
 			where the system hangs or reboots and does not give the
@@ -5952,7 +5956,7 @@
 			frequency tracepoints such as irq or sched, can cause
 			the system to live lock.
 
-	tp_printk_stop_on_boot[FTRACE]
+	tp_printk_stop_on_boot [FTRACE]
 			When tp_printk (above) is set, it can cause a lot of noise
 			on the console. It may be useful to only include the
 			printing of events during boot up, as user space may
@@ -6301,7 +6305,7 @@
 					HIGHMEM regardless of setting
 					of CONFIG_HIGHPTE.
 
-	vdso=		[X86,SH]
+	vdso=		[X86,SH,SPARC]
 			On X86_32, this is an alias for vdso32=.  Otherwise:
 
 			vdso=1: enable VDSO (the default)
@@ -6327,11 +6331,12 @@
 	video=		[FB] Frame buffer configuration
 			See Documentation/fb/modedb.rst.
 
-	video.brightness_switch_enabled= [0,1]
+	video.brightness_switch_enabled= [ACPI]
+			Format: [0|1]
 			If set to 1, on receiving an ACPI notify event
 			generated by hotkey, video driver will adjust brightness
 			level and then send out the event to user space through
-			the allocated input device; If set to 0, video driver
+			the allocated input device. If set to 0, video driver
 			will only send out the event without touching backlight
 			brightness level.
 			default: 1



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux