It appears that GPIO ACPI library uses ACPI debounce values directly. However, the GPIO library APIs expect the debounce timeout to be in microseconds. Convert ACPI value of debounce to microseconds. While at it, document this detail where it is appropriate. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664 Reported-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/gpio/gpiolib-acpi.c | 6 ++++-- drivers/gpio/gpiolib.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index c0f6a25c3279..a5495ad31c9c 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -307,7 +307,8 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip, if (IS_ERR(desc)) return desc; - ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout); + /* ACPI uses hundredths of milliseconds units */ + ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10); if (ret) dev_warn(chip->parent, "Failed to set debounce-timeout for pin 0x%04X, err %d\n", @@ -1035,7 +1036,8 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind if (ret < 0) return ret; - ret = gpio_set_debounce_timeout(desc, info.debounce); + /* ACPI uses hundredths of milliseconds units */ + ret = gpio_set_debounce_timeout(desc, info.debounce * 10); if (ret) return ret; diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f5e7443208d4..f956c533f218 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2223,6 +2223,16 @@ static int gpio_set_bias(struct gpio_desc *desc) return gpio_set_config_with_argument_optional(desc, bias, arg); } +/** + * gpio_set_debounce_timeout() - Set debounce timeout + * @desc: GPIO descriptor to set the debounce timeout + * @debounce: Debounce timeout in microseconds + * + * The function calls the certain GPIO driver to set debounce timeout + * in the hardware. + * + * Returns 0 on success, or negative error code otherwise. + */ int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce) { return gpio_set_config_with_argument_optional(desc, -- 2.34.1
