The CHT_WC_VBUS_GPIO_CTLO GPIO actually driving an external 5V Vboost
converter for Vbus depends on the board on which the Cherry Trail -
Whiskey Cove PMIC is actually used.
Since the information about the exact PMIC setup is necessary in other
places too, struct intel_soc_pmic now has a new cht_wc_model field
indicating the board model.
Only poke the CHT_WC_VBUS_GPIO_CTLO GPIO if this new field is set to
INTEL_CHT_WC_GPD_WIN_POCKET, which indicates the Type-C (with PD and
DP-altmode) setup used on the GPD pocket and GPD win; and on which
this GPIO actually controls an external 5V Vboost converter.
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v3:
- Use the new cht_wc_model intel_soc_pmic field which replaces the
intel_cht_wc_get_model() helper and adjust the commit msg to match
---
drivers/extcon/extcon-intel-cht-wc.c | 35 +++++++++++++++++-----------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 771f6f4cf92e..81cae8c75850 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -358,20 +359,26 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
if (IS_ERR(ext->edev))
return PTR_ERR(ext->edev);
- /*
- * When a host-cable is detected the BIOS enables an external 5v boost
- * converter to power connected devices there are 2 problems with this:
- * 1) This gets seen by the external battery charger as a valid Vbus
- * supply and it then tries to feed Vsys from this creating a
- * feedback loop which causes aprox. 300 mA extra battery drain
- * (and unless we drive the external-charger-disable pin high it
- * also tries to charge the battery causing even more feedback).
- * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
- * Since the external battery charger has its own 5v boost converter
- * which does not have these issues, we simply turn the separate
- * external 5v boost converter off and leave it off entirely.
- */
- cht_wc_extcon_set_5v_boost(ext, false);
+ switch (pmic->cht_wc_model) {
+ case INTEL_CHT_WC_GPD_WIN_POCKET:
+ /*
+ * When a host-cable is detected the BIOS enables an external 5v boost
+ * converter to power connected devices there are 2 problems with this:
+ * 1) This gets seen by the external battery charger as a valid Vbus
+ * supply and it then tries to feed Vsys from this creating a
+ * feedback loop which causes aprox. 300 mA extra battery drain
+ * (and unless we drive the external-charger-disable pin high it
+ * also tries to charge the battery causing even more feedback).
+ * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
+ * Since the external battery charger has its own 5v boost converter
+ * which does not have these issues, we simply turn the separate
+ * external 5v boost converter off and leave it off entirely.
+ */
+ cht_wc_extcon_set_5v_boost(ext, false);
+ break;
+ default:
+ break;
+ }
/* Enable sw control */
ret = cht_wc_extcon_sw_control(ext, true);
--
2.33.1
