Re: [PATCH v4 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 31, 2022 at 03:37:16PM +0200, Andy Shevchenko wrote:
> On Sun, Jan 30, 2022 at 09:45:38PM +0100, Hans de Goede wrote:
> > Some (USB) charger ICs have variants with USB D+ and D- pins to do their
> > own builtin charger-type detection, like e.g. the bq24190 and bq25890 and
> > also variants which lack this functionality, e.g. the bq24192 and bq25892.
> > 
> > In case the charger-type; and thus the input-current-limit detection is
> > done outside the charger IC then we need some way to communicate this to
> > the charger IC. In the past extcon was used for this, but if the external
> > detection does e.g. full USB PD negotiation then the extcon cable-types do
> > not convey enough information.
> > 
> > For these setups it was decided to model the external charging "brick"
> > and the parameters negotiated with it as a power_supply class-device
> > itself; and power_supply_set_input_current_limit_from_supplier() was
> > introduced to allow drivers to get the input-current-limit this way.
> > 
> > But in some cases psy drivers may want to know other properties, e.g. the
> > bq25892 can do "quick-charge" negotiation by pulsing its current draw,
> > but this should only be done if the usb_type psy-property of its supplier
> > is set to DCP (and device-properties indicate the board allows higher
> > voltages).
> > 
> > Instead of adding extra helper functions for each property which
> > a psy-driver wants to query from its supplier, refactor
> > power_supply_set_input_current_limit_from_supplier() into a
> > more generic power_supply_get_property_from_supplier() function.
> 
> ...
> 
> > +	ret = power_supply_get_property_from_supplier(bdi->charger,
> > +						      POWER_SUPPLY_PROP_CURRENT_MAX,
> > +						      &val);
> > +	if (ret == 0)
> 
> Can it be as simple as
> 
> 	if (ret)
> 		return;
> 
> 	...
> 
> 
> ?
> 
> Or did I misunderstand the meaning of 0?

Despite on this comment being addressed or not, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

I don't see any blocking issues with the bq25890 part neither, so
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
for the BQ25890 part.

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux