Re: [PATCH v4 0/9] Support Spi in i2c-multi-instantiate driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

On 1/20/22 14:43, Stefan Binding wrote:
> Add support for SPI bus in the i2c-multi-instantiate driver as
> upcoming laptops will need to multi instantiate SPI devices from
> a single device node, which has multiple SpiSerialBus entries at
> the ACPI table.
> 
> With the new SPI support, i2c-multi-instantiate becomes
> bus-multi-instantiate and is moved to the ACPI folder.
> 
> The intention is to support the SPI bus by re-using the current
> I2C multi instantiate, instead of creating a new SPI multi
> instantiate, to make it possible for peripherals that can be
> controlled by I2C or SPI to have the same HID at the ACPI table.
> 
> The new driver (Bus multi instantiate, bmi) checks for the
> hard-coded bus type and returns -ENODEV in case of zero devices
> found for that bus. In the case of automatic bus detection, 
> the driver will give preference to I2C.
> 
> The expectation is for a device node in the ACPI table to have
> multiple I2cSerialBus only or multiple SpiSerialBus only, not
> a mix of both; and for the case where there are both entries in
> one device node, only the I2C ones would be probed.
> 
> This new bus multi instantiate will be used in CS35L41 HDA new
> driver.

Mark, since most of my review remarks are small(ish) I expect
the next version of this (except patch 8/9) to be ready for
merging.

I can either merge all patches on top of 5.17-rc1 once released;
and provide an immutable-branch for you to merge for the SPI
bits; or you can merge patches 1-4 (the SPI patches) and then
send me a pull-req for an immutable-branch with those 4,
so that I can merge that and then the rest on top.

Mark, please let me know how you want to proceed with merging this.

Regards,

Hans




> 
> Changes since V2:
>  - Moved bus-multi-instantiate back into platform/x86
> 
> Lucas Tanure (4):
>   platform/x86: i2c-multi-instantiate: Rename it for a generic bus
>     driver name
>   platform/x86: bus-multi-instantiate: Reorganize I2C functions
>   ALSA: hda/realtek: Add support for HP Laptops
>   ACPI / scan: Create platform device for CS35L41
> 
> Stefan Binding (5):
>   spi: Make spi_alloc_device and spi_add_device public again
>   spi: Create helper API to lookup ACPI info for spi device
>   spi: Support selection of the index of the ACPI Spi Resource before
>     alloc
>   spi: Add API to count spi acpi resources
>   platform/x86: bus-multi-instantiate: Add SPI support
> 
>  MAINTAINERS                                  |   4 +-
>  drivers/acpi/scan.c                          |  16 +-
>  drivers/platform/x86/Kconfig                 |  14 +-
>  drivers/platform/x86/Makefile                |   2 +-
>  drivers/platform/x86/bus-multi-instantiate.c | 369 +++++++++++++++++++
>  drivers/platform/x86/i2c-multi-instantiate.c | 174 ---------
>  drivers/spi/spi.c                            | 142 ++++++-
>  include/linux/spi/spi.h                      |  32 ++
>  sound/pci/hda/patch_realtek.c                |  43 ++-
>  9 files changed, 588 insertions(+), 208 deletions(-)
>  create mode 100644 drivers/platform/x86/bus-multi-instantiate.c
>  delete mode 100644 drivers/platform/x86/i2c-multi-instantiate.c
> 




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux