Re: [PATCH v2 09/35] brcmfmac: pcie: Perform firmware selection for Apple platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/4/2022 8:26 AM, Hector Martin wrote:
On Apple platforms, firmware selection uses the following elements:

   Property         Example   Source
   ==============   =======   ========================
* Chip name        4378      Device ID
* Chip revision    B1        OTP
* Platform         shikoku   DT (ARM64) or ACPI (x86)
* Module type      RASP      OTP
* Module vendor    m         OTP
* Module version   6.11      OTP
* Antenna SKU      X3        DT (ARM64) or ACPI (x86)

In macOS, these firmwares are stored using filenames in this format
under /usr/share/firmware/wifi:

     C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt

To prepare firmwares for Linux, we rename these to a scheme following
the existing brcmfmac convention:

     brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\
	<mod_vendor>-<mod_version>-<antenna_sku>.txt

The NVRAM uses all the components, while the firmware and CLM blob only
use the chip/revision/platform/antenna_sku:

     brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin

e.g.

     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin

In addition, since there are over 1000 files in total, many of which are
symlinks or outright duplicates, we deduplicate and prune the firmware
tree to reduce firmware filenames to fewer dimensions. For example, the
shikoku platform (MacBook Air M1 2020) simplifies to just 4 files:

     brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob
     brcm/brcmfmac4378b1-pcie.apple,shikoku.bin
     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt

This reduces the total file count to around 170, of which 75 are
symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and
61 NVRAM config files. We also slightly process NVRAM files to correct
some formatting issues.

To handle this, the driver must try the following path formats when
looking for firmware files:

     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt
     brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt *
     brcm/brcmfmac4378b1-pcie.apple,shikoku.txt

* Not relevant for NVRAM, only for firmware/CLM.

The chip revision nominally comes from OTP on Apple platforms, but it
can be mapped to the PCI revision number, so we ignore the OTP revision
and continue to use the existing PCI revision mechanism to identify chip
revisions, as the driver already does for other chips. Unfortunately,
the mapping is not consistent between different chip types, so this has
to be determined experimentally.

Not sure I understand this. The chip revision comes from the chipcommon register [1]. Maybe that is what you mean by "PCI revision number". For some chips it is possible OTP is used to override that.

Reviewed-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
---
  .../broadcom/brcm80211/brcmfmac/pcie.c        | 58 ++++++++++++++++++-
  1 file changed, 56 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 74c9a4f74813..250e0bd40cb3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2094,8 +2094,62 @@ brcmf_pcie_prepare_fw_request(struct brcmf_pciedev_info *devinfo)
  	fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus) + 1;
  	fwreq->bus_nr = devinfo->pdev->bus->number;
- brcmf_dbg(PCIE, "Board: %s\n", devinfo->settings->board_type);
-	fwreq->board_types[0] = devinfo->settings->board_type;
+	/* Apple platforms with fancy firmware/NVRAM selection */
+	if (devinfo->settings->board_type &&
+	    devinfo->settings->antenna_sku &&
+	    devinfo->otp.valid) {
+		char *buf;
+		int len;
+
+		brcmf_dbg(PCIE, "Apple board: %s\n",
+			  devinfo->settings->board_type);

maybe good to use local reference for devinfo->settings->board_type, which is used several times below.

+
+		/* Example: apple,shikoku-RASP-m-6.11-X3 */
+		len = (strlen(devinfo->settings->board_type) + 1 +
+		       strlen(devinfo->otp.module) + 1 +
+		       strlen(devinfo->otp.vendor) + 1 +
+		       strlen(devinfo->otp.version) + 1 +
+		       strlen(devinfo->settings->antenna_sku) + 1);
+
+		/* apple,shikoku */
+		fwreq->board_types[5] = devinfo->settings->board_type;

[1] https://elixir.bootlin.com/linux/latest/source/include/linux/bcma/bcma_driver_chipcommon.h#L12

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux