On Thu, Dec 30, 2021 at 12:57 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module
> attached to an UART of the system.
>
> The GPS modules talk a custom protocol which only works with a closed-
> source Android gpsd daemon which knows this protocol.
>
> The ACPI nodes also describe GPIOs to turn the GPS on/off these are
> handled by the net/rfkill/rfkill-gpio.c code. This handling predates the
> addition of enumeration of ACPI instantiated serdevs to the kernel and
> was broken by that addition, because the ACPI scan code now no longer
> instantiates platform_device-s for these nodes.
>
> Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids
> and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets
> a platform_device to bind to again; and so that a tty cdev for gpsd
> gets created for these.
>
> Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices")
> Cc: Frédéric Danis <frederic.danis.oss@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Note there is some work on reverse-engineering the protocol for these
> GPS modules here, but this is not complete:
> https://redmine.replicant.us/projects/replicant/wiki/BCM4751
> https://git.replicant.us/contrib/PaulK/bcm4751/
> ---
> drivers/acpi/scan.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 526e823a33fb..c5dfbe26a0cb 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1701,6 +1701,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> {
> struct list_head resource_list;
> bool is_serial_bus_slave = false;
> + static const struct acpi_device_id ignore_serial_bus_ids[] = {
> /*
> * These devices have multiple I2cSerialBus resources and an i2c-client
> * must be instantiated for each, each with its own i2c_device_id.
> @@ -1709,11 +1710,18 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
> * which i2c_device_id to use for each resource.
> */
> - static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
> {"BSG1160", },
> {"BSG2150", },
> {"INT33FE", },
> {"INT3515", },
> + /*
> + * HIDs of device with an UartSerialBusV2 resource for which userspace
> + * expects a regular tty cdev to be created (instead of the in kernel
> + * serdev) and which have a kernel driver which expects a platform_dev
> + * such as the rfkill-gpio driver.
> + */
> + {"BCM4752", },
> + {"LNV4752", },
> {}
> };
>
> @@ -1727,8 +1735,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> fwnode_property_present(&device->fwnode, "baud")))
> return true;
>
> - /* Instantiate a pdev for the i2c-multi-instantiate drv to bind to */
> - if (!acpi_match_device_ids(device, i2c_multi_instantiate_ids))
> + if (!acpi_match_device_ids(device, ignore_serial_bus_ids))
> return false;
>
> INIT_LIST_HEAD(&resource_list);
> --
Applied as 5.17 material, thanks!
