On 12/6/21 6:33 PM, Hans de Goede wrote: > So far the extcon-intel-cht-wc code has only been tested on devices with > a Type-C connector with USB-PD, USB3 (superspeed) and DP-altmode support > through a FUSB302 Type-C controller. > > Some devices with the intel-cht-wc PMIC however come with an USB-micro-B > connector, or an USB-2 only Type-C connector without USB-PD. > > Which device-model we are running on can be identified with the new > cht_wc_model intel_soc_pmic field. On models without a Type-C controller > the extcon code must control the Vbus 5V boost converter and the USB role > switch depending on the detected cable-type. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > Changes in v3: > - Some minor tweaks / spelling fixes based on Andy's review > --- > drivers/extcon/Kconfig | 2 + > drivers/extcon/extcon-intel-cht-wc.c | 91 ++++++++++++++++++++++++++++ > 2 files changed, 93 insertions(+) [snip] Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> -- Best Regards, Chanwoo Choi Samsung Electronics
