Some sensors come with a variable-focus lens where the lens focus is
controller by a VCM (Voice Coil Motor). If there is a VCM for the
lens-focus, and if so which one, is described on the vcm_type field
of the ACPI SSDB table.
These VCMs are a second I2C device listed as an extra I2cSerialBusV2
resource in the same ACPI device as the sensor. The i2c-core-acpi.c
code only instantiates an i2c-client for the first I2cSerialBusV2
resource.
Add support for instantiating an i2c-client for the VCM with
the type of the i2c-client set based on the SSDB vcm_type field.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/pci/intel/ipu3/cio2-bridge.c | 55 ++++++++++++++++++++++
drivers/media/pci/intel/ipu3/cio2-bridge.h | 16 ++++++-
2 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
index 460ef7f78234..9b02f5599082 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.c
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
@@ -3,6 +3,7 @@
#include <linux/acpi.h>
#include <linux/device.h>
+#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/property.h>
#include <media/v4l2-fwnode.h>
@@ -38,6 +39,18 @@ static const struct cio2_property_names prop_names = {
.link_frequencies = "link-frequencies",
};
+static const char * const cio2_vcm_types[] = {
+ "ad5823",
+ "dw9714",
+ "ad5816",
+ "dw9719",
+ "dw9718",
+ "dw9806b",
+ "wv517s",
+ "lc898122xa",
+ "lc898212axb",
+};
+
static int cio2_bridge_read_acpi_buffer(struct acpi_device *adev, char *id,
void *data, u32 size)
{
@@ -134,6 +147,12 @@ static void cio2_bridge_create_fwnode_properties(
sensor->dev_properties[2] = PROPERTY_ENTRY_U32(
sensor->prop_names.orientation,
orientation);
+ if (sensor->ssdb.vcmtype) {
+ sensor->vcm_ref[0] =
+ SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_VCM]);
+ sensor->dev_properties[3] =
+ PROPERTY_ENTRY_REF_ARRAY("lens-focus", sensor->vcm_ref);
+ }
sensor->ep_properties[0] = PROPERTY_ENTRY_U32(
sensor->prop_names.bus_type,
@@ -195,6 +214,33 @@ static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
sensor->node_names.endpoint,
&nodes[SWNODE_CIO2_PORT],
sensor->cio2_properties);
+ if (sensor->ssdb.vcmtype)
+ nodes[SWNODE_VCM] =
+ NODE_VCM(cio2_vcm_types[sensor->ssdb.vcmtype - 1]);
+}
+
+static void cio2_bridge_instantiate_vcm_i2c_client(struct cio2_sensor *sensor)
+{
+ struct i2c_board_info board_info = { };
+ char name[16];
+
+ if (!sensor->ssdb.vcmtype)
+ return;
+
+ snprintf(name, sizeof(name), "%s-VCM", acpi_dev_name(sensor->adev));
+ board_info.dev_name = name;
+ strscpy(board_info.type, cio2_vcm_types[sensor->ssdb.vcmtype - 1],
+ ARRAY_SIZE(board_info.type));
+ board_info.swnode = &sensor->swnodes[SWNODE_VCM];
+
+ sensor->vcm_i2c_client =
+ i2c_acpi_new_device_by_fwnode(acpi_fwnode_handle(sensor->adev),
+ 1, &board_info);
+ if (IS_ERR(sensor->vcm_i2c_client)) {
+ dev_warn(&sensor->adev->dev, "Error instantiation VCM i2c-client: %ld\n",
+ PTR_ERR(sensor->vcm_i2c_client));
+ sensor->vcm_i2c_client = NULL;
+ }
}
static void cio2_bridge_unregister_sensors(struct cio2_bridge *bridge)
@@ -207,6 +253,7 @@ static void cio2_bridge_unregister_sensors(struct cio2_bridge *bridge)
software_node_unregister_nodes(sensor->swnodes);
ACPI_FREE(sensor->pld);
acpi_dev_put(sensor->adev);
+ i2c_unregister_device(sensor->vcm_i2c_client);
}
}
@@ -239,6 +286,12 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
if (ret)
goto err_put_adev;
+ if (sensor->ssdb.vcmtype > ARRAY_SIZE(cio2_vcm_types)) {
+ dev_warn(&adev->dev, "Unknown VCM type %d\n",
+ sensor->ssdb.vcmtype);
+ sensor->ssdb.vcmtype = 0;
+ }
+
status = acpi_get_physical_device_location(adev->handle, &sensor->pld);
if (ACPI_FAILURE(status)) {
ret = -ENODEV;
@@ -269,6 +322,8 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
sensor->adev = acpi_dev_get(adev);
adev->fwnode.secondary = fwnode;
+ cio2_bridge_instantiate_vcm_i2c_client(sensor);
+
dev_info(&cio2->dev, "Found supported sensor %s\n",
acpi_dev_name(adev));
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.h b/drivers/media/pci/intel/ipu3/cio2-bridge.h
index 202c7d494f7a..4418cbd08208 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.h
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.h
@@ -8,6 +8,8 @@
#include "ipu3-cio2.h"
+struct i2c_client;
+
#define CIO2_HID "INT343E"
#define CIO2_MAX_LANES 4
#define MAX_NUM_LINK_FREQS 3
@@ -42,12 +44,19 @@
.properties = _PROPS, \
}
+#define NODE_VCM(_TYPE) \
+ (const struct software_node) { \
+ .name = _TYPE, \
+ }
+
enum cio2_sensor_swnodes {
SWNODE_SENSOR_HID,
SWNODE_SENSOR_PORT,
SWNODE_SENSOR_ENDPOINT,
SWNODE_CIO2_PORT,
SWNODE_CIO2_ENDPOINT,
+ /* Must be last because it is optional / maybe empty */
+ SWNODE_VCM,
SWNODE_COUNT
};
@@ -106,8 +115,10 @@ struct cio2_sensor_config {
struct cio2_sensor {
char name[ACPI_ID_LEN];
struct acpi_device *adev;
+ struct i2c_client *vcm_i2c_client;
- struct software_node swnodes[6];
+ /* SWNODE_COUNT + 1 for terminating empty node */
+ struct software_node swnodes[SWNODE_COUNT + 1];
struct cio2_node_names node_names;
struct cio2_sensor_ssdb ssdb;
@@ -115,10 +126,11 @@ struct cio2_sensor {
struct cio2_property_names prop_names;
struct property_entry ep_properties[5];
- struct property_entry dev_properties[4];
+ struct property_entry dev_properties[5];
struct property_entry cio2_properties[3];
struct software_node_ref_args local_ref[1];
struct software_node_ref_args remote_ref[1];
+ struct software_node_ref_args vcm_ref[1];
};
struct cio2_bridge {
--
2.33.1
