[RFC v2 1/2] ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Xiaomi Mi Pad 2 has backlit LEDs behind the capacitive menu, home
and back buttons below the screen which are controlled by the PWM2
controller of the CHT SoC. This PWM2 controller gets hidden by the
firmware, add it to the always_present_ids table so that we can use
the PWM controller to control the backlighting of the buttons.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/acpi/x86/utils.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index f22f23933063..cb988f9b23a1 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -58,6 +58,11 @@ static const struct always_present_id always_present_ids[] = {
 	ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
 		}),
+	/* The Xiaomi Mi Pad 2 uses PWM2 for touchkeys backlight control */
+	ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
+		DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
+	      }),
 	/*
 	 * The INT0002 device is necessary to clear wakeup interrupt sources
 	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
-- 
2.31.1




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux