On Tue, Oct 19, 2021 at 7:01 AM <alison.schofield@xxxxxxxxx> wrote:
>
> From: Alison Schofield <alison.schofield@xxxxxxxxx>
>
> During NUMA init, CXL memory defined in the SRAT Memory Affinity
> subtable may be assigned to a NUMA node. Since there is no
> requirement that the SRAT be comprehensive for CXL memory another
> mechanism is needed to assign NUMA nodes to CXL memory not identified
> in the SRAT.
>
> Use the CXL Fixed Memory Window Structure (CFMWS) of the ACPI CXL
> Early Discovery Table (CEDT) to find all CXL memory ranges.
> Create a NUMA node for each CFMWS that is not already assigned to
> a NUMA node. Add a memblk attaching its host physical address
> range to the node.
>
> Note that these ranges may not actually map any memory at boot time.
> They may describe persistent capacity or may be present to enable
> hot-plug.
>
> Consumers can use phys_to_target_node() to discover the NUMA node.
>
> Signed-off-by: Alison Schofield <alison.schofield@xxxxxxxxx>
Dan, this seems to fall into your territory.
> ---
> Changes in v3:
> - Initial variable pxm (Ben)
>
> Changes in v2:
> - Use MAX_NUMNODES as max value when searching node_to_pxm_map() (0-day)
> - Add braces around single statement for loop (coding style)
> - Rename acpi_parse_cfmws() to acpi_cxl_cfmws_init to be more like other
> functions in this file doing similar work.
> - Comments: remove superflous and state importance of the init order,
> CFMWS after SRAT, (Ira, Dan)
> - Add prototype for numa_add_memblk() (0-day)
>
> drivers/acpi/numa/srat.c | 70 ++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/acpi.c | 8 +++--
> include/linux/acpi.h | 1 +
> 3 files changed, 76 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
> index b8795fc49097..daaaef58f1e6 100644
> --- a/drivers/acpi/numa/srat.c
> +++ b/drivers/acpi/numa/srat.c
> @@ -300,6 +300,67 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> }
> #endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
>
> +static int __init acpi_cxl_cfmws_init(struct acpi_table_header *acpi_cedt)
> +{
> + struct acpi_cedt_cfmws *cfmws;
> + acpi_size len, cur = 0;
> + int i, node, pxm = 0;
> + void *cedt_subtable;
> + u64 start, end;
> +
> + /* Find the max PXM defined in the SRAT */
> + for (i = 0; i < MAX_NUMNODES - 1; i++) {
> + if (node_to_pxm_map[i] > pxm)
> + pxm = node_to_pxm_map[i];
> + }
> + /* Start assigning fake PXM values after the SRAT max PXM */
> + pxm++;
> +
> + len = acpi_cedt->length - sizeof(*acpi_cedt);
> + cedt_subtable = acpi_cedt + 1;
> +
> + while (cur < len) {
> + struct acpi_cedt_header *c = cedt_subtable + cur;
> +
> + if (c->type != ACPI_CEDT_TYPE_CFMWS)
> + goto next;
> +
> + cfmws = cedt_subtable + cur;
> + if (cfmws->header.length < sizeof(*cfmws)) {
> + pr_warn_once("CFMWS entry skipped:invalid length:%u\n",
> + cfmws->header.length);
> + goto next;
> + }
> +
> + start = cfmws->base_hpa;
> + end = cfmws->base_hpa + cfmws->window_size;
> +
> + /*
> + * Skip if the SRAT already described
> + * the NUMA details for this HPA.
> + */
> + node = phys_to_target_node(start);
> + if (node != NUMA_NO_NODE)
> + goto next;
> +
> + node = acpi_map_pxm_to_node(pxm);
> + if (node == NUMA_NO_NODE) {
> + pr_err("ACPI NUMA: Too many proximity domains.\n");
> + return -EINVAL;
> + }
> +
> + if (numa_add_memblk(node, start, end) < 0) {
> + /* CXL driver must handle the NUMA_NO_NODE case */
> + pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",
> + node, start, end);
> + }
> + pxm++;
> +next:
> + cur += c->length;
> + }
> + return 0;
> +}
> +
> static int __init acpi_parse_slit(struct acpi_table_header *table)
> {
> struct acpi_table_slit *slit = (struct acpi_table_slit *)table;
> @@ -478,6 +539,15 @@ int __init acpi_numa_init(void)
> /* SLIT: System Locality Information Table */
> acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
>
> + /*
> + * CEDT: CXL Fixed Memory Window Structures (CFMWS)
> + * must be parsed after the SRAT. It creates NUMA
> + * Nodes for CXL memory ranges not already defined
> + * in the SRAT and it assigns PXMs after the max PXM
> + * defined in the SRAT.
> + */
> + acpi_table_parse(ACPI_SIG_CEDT, acpi_cxl_cfmws_init);
acpi_table_parse() creates a memory mapping for accessing the table.
so it usually is good to call acpi_put_table() when you are done with
it to let that mapping go away.
> +
> if (cnt < 0)
> return cnt;
> else if (!parsed_numa_memblks)
> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
> index 10120e4e0b9f..ccf73f0a59a7 100644
> --- a/drivers/cxl/acpi.c
> +++ b/drivers/cxl/acpi.c
> @@ -122,9 +122,11 @@ static void cxl_add_cfmws_decoders(struct device *dev,
> cfmws->base_hpa, cfmws->base_hpa +
> cfmws->window_size - 1);
> } else {
> - dev_dbg(dev, "add: %s range %#llx-%#llx\n",
> - dev_name(&cxld->dev), cfmws->base_hpa,
> - cfmws->base_hpa + cfmws->window_size - 1);
> + dev_dbg(dev, "add: %s node: %d range %#llx-%#llx\n",
> + dev_name(&cxld->dev),
> + phys_to_target_node(cxld->range.start),
> + cfmws->base_hpa,
> + cfmws->base_hpa + cfmws->window_size - 1);
> }
> cur += c->length;
> }
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 974d497a897d..f837fd715440 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -426,6 +426,7 @@ extern bool acpi_osi_is_win8(void);
> #ifdef CONFIG_ACPI_NUMA
> int acpi_map_pxm_to_node(int pxm);
> int acpi_get_node(acpi_handle handle);
> +int __init numa_add_memblk(int nodeid, u64 start, u64 end);
>
> /**
> * pxm_to_online_node - Map proximity ID to online node
>
> base-commit: 64570fbc14f8d7cb3fe3995f20e26bc25ce4b2cc
> prerequisite-patch-id: f09c67c6b3801f511521fd29c1cc01f5c5b1e9de
> --
