On Fri, 8 Oct 2021 18:53:39 -0700
<alison.schofield@xxxxxxxxx> wrote:
> From: Alison Schofield <alison.schofield@xxxxxxxxx>
>
> During NUMA init, CXL memory defined in the SRAT Memory Affinity
> subtable may be assigned to a NUMA node. Since there is no
> requirement that the SRAT be comprehensive for CXL memory another
> mechanism is needed to assign NUMA nodes to CXL memory not identified
> in the SRAT.
>
> Use the CXL Fixed Memory Window Structure's (CFMWS) of the ACPI CXL
> Early Discovery Table (CEDT) to find all CXL memory ranges. Create a
> NUMA node for each range that is not already assigned to a NUMA node.
> Add a memblk attaching its host physical address range to the node.
>
> Note that these ranges may not actually map any memory at boot time.
> They may describe persistent capacity or may be present to enable
> hot-plug.
>
> Consumers can use phys_to_target_node() to discover the NUMA node.
>
> Signed-off-by: Alison Schofield <alison.schofield@xxxxxxxxx>
Hi Alison,
I'm not sure that a CFMWS entry should map to a single NUMA node...
Each entry corresponds to a contiguous HPA range into which CXL devices
below a set of ports (if interleaved) or one port should be mapped.
That could be multiple devices, each with it's own performance characteristics,
or potentially a mix of persistent and volatile memory on a system with limited
qtg groups.
Maybe it's the best we can do though given information available
before any devices are present.
Jonathan
> ---
> drivers/acpi/numa/srat.c | 58 ++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/acpi.c | 8 +++---
> 2 files changed, 63 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
> index b8795fc49097..568e033e6c3f 100644
> --- a/drivers/acpi/numa/srat.c
> +++ b/drivers/acpi/numa/srat.c
> @@ -300,6 +300,61 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> }
> #endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
>
> +/* Add a NUMA node and memblk for each node-less CFMWS */
> +static int __init acpi_parse_cfmws(struct acpi_table_header *acpi_cedt)
> +{
> + struct acpi_cedt_cfmws *cfmws;
> + acpi_size len, cur = 0;
> + void *cedt_subtable;
> + int i, pxm, node;
> + u64 start, end;
> +
> + /* Use fake PXM values starting after the max PXM found in the SRAT */
> + for (i = 0; i < MAX_PXM_DOMAINS - 1; i++)
> + if (node_to_pxm_map[i] > pxm)
> + pxm = node_to_pxm_map[i];
> + pxm++;
> +
> + len = acpi_cedt->length - sizeof(*acpi_cedt);
> + cedt_subtable = acpi_cedt + 1;
> +
> + while (cur < len) {
> + struct acpi_cedt_header *c = cedt_subtable + cur;
> +
> + if (c->type != ACPI_CEDT_TYPE_CFMWS)
> + goto next;
> +
> + cfmws = cedt_subtable + cur;
> + if (cfmws->header.length < sizeof(*cfmws)) {
> + pr_warn_once("CFMWS entry skipped:invalid length:%u\n",
> + cfmws->header.length);
> + goto next;
> + }
> +
> + start = cfmws->base_hpa;
> + end = cfmws->base_hpa + cfmws->window_size;
> +
> + /* Skip if the HPA is already assigned to a NUMA node */
> + node = phys_to_target_node(start);
> + if (node != NUMA_NO_NODE)
> + goto next;
> +
> + node = acpi_map_pxm_to_node(pxm);
> + if (node == NUMA_NO_NODE) {
> + pr_err("ACPI NUMA: Too many proximity domains.\n");
> + return -EINVAL;
> + }
> + if (numa_add_memblk(node, start, end) < 0) {
> + pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",
> + node, start, end);
> + }
> + pxm++;
> +next:
> + cur += c->length;
> + }
> + return 0;
> +}
> +
> static int __init acpi_parse_slit(struct acpi_table_header *table)
> {
> struct acpi_table_slit *slit = (struct acpi_table_slit *)table;
> @@ -478,6 +533,9 @@ int __init acpi_numa_init(void)
> /* SLIT: System Locality Information Table */
> acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
>
> + /* CEDT: CXL Early Discovery Table */
> + acpi_table_parse(ACPI_SIG_CEDT, acpi_parse_cfmws);
> +
> if (cnt < 0)
> return cnt;
> else if (!parsed_numa_memblks)
> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
> index dadc7f64b9ff..3798841c3418 100644
> --- a/drivers/cxl/acpi.c
> +++ b/drivers/cxl/acpi.c
> @@ -144,9 +144,11 @@ static void cxl_add_cfmws_decoders(struct device *dev,
> cfmws->window_size - 1);
> goto next;
> }
> - dev_dbg(dev, "add: %s range %#llx-%#llx\n",
> - dev_name(&cxld->dev), cfmws->base_hpa,
> - cfmws->base_hpa + cfmws->window_size - 1);
> + dev_dbg(dev, "add:%s node:%d range:%#llx-%#llx restrict:%#x\n",
> + dev_name(&cxld->dev),
> + phys_to_target_node(cxld->range.start),
> + cxld->range.start, cxld->range.end,
> + cfmws->restrictions);
> next:
> cur += c->length;
> }
