Re: [PATCH v3] x86/PCI: Ignore E820 reservations for bridge windows on newer systems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

Thank you for the review.

On 10/14/21 5:49 PM, Bjorn Helgaas wrote:
> On Thu, Oct 14, 2021 at 01:03:57PM +0200, Hans de Goede wrote:
>> Some BIOS-es contain a bug where they add addresses which map to system RAM
>> in the PCI bridge memory window returned by the ACPI _CRS method, see
>> commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address
>> space").
>>
>> To avoid this Linux by default excludes E820 reservations when allocating
>> addresses since 2010. Windows however ignores E820 reserved regions for PCI
>> mem allocations, so in hindsight Linux honoring them is a problem.
> 
> This is a problem not because Windows ignores E820, but because the
> spec does not support excluding based on E820.  We should cite the
> spec and include the relevant text here.

Ok, for v5 I will replace this with your info on the specs from this email:
https://lore.kernel.org/linux-pci/20211008110149.GA1313872@bhelgaas/T/#t

> 
>> Recently (2020) some systems have shown-up with E820 reservations which
>> cover the entire _CRS returned PCI bridge memory window, causing all
>> attempts to assign memory to PCI BARs which have not been setup by the
>> BIOS to fail. For example here are the relevant dmesg bits from a
>> Lenovo IdeaPad 3 15IIL 81WE:
>>
>>  [mem 0x000000004bc50000-0x00000000cfffffff] reserved
>>  pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
>>
>> Ideally Linux would fully stop honoring E820 reservations for PCI mem
>> allocations, but then the old systems this was added for will regress.
>> Instead keep the old behavior for old systems, while ignoring the E820
>> reservations like Windows does for any systems from now on.
>>
>> Old systems are defined here as BIOS year < 2018, this was chosen to
>> make sure that pci_use_e820 will not be set on the currently affected
>> systems, while at the same time also taking into account that the
>> systems for which the E820 checking was originally added may have
>> received BIOS updates for quite a while (esp. CVE related ones),
>> giving them a more recent BIOS year then 2010.
>>
>> Also add pci=no_e820 and pci=use_e820 options to allow overriding
>> the BIOS year heuristic.
>>
>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459
>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899
>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793
>> BugLink: https://bugs.launchpad.net/bugs/1878279
>> BugLink: https://bugs.launchpad.net/bugs/1931715
>> BugLink: https://bugs.launchpad.net/bugs/1932069
>> BugLink: https://bugs.launchpad.net/bugs/1921649
>> Cc: Benoit Grégoire <benoitg@xxxxxxxx>
>> Cc: Hui Wang <hui.wang@xxxxxxxxxxxxx>
>> Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
>> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>> ---
>> Changes in v3:
>> - Commit msg tweaks (drop dmesg timestamps, typo fix)
>> - Use "defined(CONFIG_...)" instead of "defined CONFIG_..."
>> - Add Mika's Reviewed-by
>>
>> Changes in v2:
>> - Replace the per model DMI quirk approach with disabling E820 reservations
>>   checking for all systems with a BIOS year >= 2018
>> - Add documentation for the new kernel-parameters to
>>   Documentation/admin-guide/kernel-parameters.txt
>> ---
>> Other patches trying to address the same issue:
>> https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@xxxxxxxxxxxxx
>> https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@xxxxxxxxxxxxxxx
>> V1 patch:
>> https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@xxxxxxxxxx
>> ---
>>  .../admin-guide/kernel-parameters.txt         |  6 ++++
>>  arch/x86/include/asm/pci_x86.h                | 10 +++++++
>>  arch/x86/kernel/resource.c                    |  4 +++
>>  arch/x86/pci/acpi.c                           | 29 +++++++++++++++++++
>>  arch/x86/pci/common.c                         |  6 ++++
>>  5 files changed, 55 insertions(+)
>>
>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>> index 43dc35fe5bc0..969cde5d74c8 100644
>> --- a/Documentation/admin-guide/kernel-parameters.txt
>> +++ b/Documentation/admin-guide/kernel-parameters.txt
>> @@ -3949,6 +3949,12 @@
>>  				please report a bug.
>>  		nocrs		[X86] Ignore PCI host bridge windows from ACPI.
>>  				If you need to use this, please report a bug.
>> +		use_e820	[X86] Honor E820 reservations when allocating
>> +				PCI host bridge memory. If you need to use this,
>> +				please report a bug.
>> +		no_e820		[X86] ignore E820 reservations when allocating
>> +				PCI host bridge memory. If you need to use this,
>> +				please report a bug.
> 
> Inconsistent capitalization.
> 
> Should use same terminology as nocrs, i.e., "PCI host bridge windows",
> not "PCI host bridge memory".
> 
> I don't think "Honor E820 reservations" is the right way to describe
> this.  It's not a question of upholding something we *should* be
> doing.  That would be a matter of working around a BIOS defect.
> Maybe something like this:
> 
>   Use E820 reservations to exclude parts of PCI host bridge windows.
>   This is a workaround for BIOS defects in host bridge _CRS methods.
>   If you need to use this, please report a bug to
>   linux-pci@xxxxxxxxxxxxxxx so we can apply it automatically.

Ok, that works for me, I'll use the above text for v5.


> Not 100% sure we need "no_e820" since that should be the default.  But
> I guess it's conceivable some system might need it.  I just hate
> adding additional things for people to try and then spread the
> resulting misinformation as a "fix" on random forums.

no_e820 will be the default for BIOS-year >= 2018, but on older
systems my patch preserves the old behavior of use_e820.

So to allow people to easily test if no_e820 behavior helps on
older systems we need it.

I fully agree with your worry about 'misinformation as a "fix"
on random forums', but I don't have a solution for that.

I guess we could completely omit both cmdline options, but
that will make debugging issues a lot header. IMHO it is
worthwhile to have this options to allow users to quickly
test things when we ask them to do so.

> 
>>  		routeirq	Do IRQ routing for all PCI devices.
>>  				This is normally done in pci_enable_device(),
>>  				so this option is a temporary workaround
>> diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
>> index 490411dba438..0bb4e7dd0ffc 100644
>> --- a/arch/x86/include/asm/pci_x86.h
>> +++ b/arch/x86/include/asm/pci_x86.h
>> @@ -39,6 +39,8 @@ do {						\
>>  #define PCI_ROOT_NO_CRS		0x100000
>>  #define PCI_NOASSIGN_BARS	0x200000
>>  #define PCI_BIG_ROOT_WINDOW	0x400000
>> +#define PCI_USE_E820		0x800000
>> +#define PCI_NO_E820		0x1000000
>>  
>>  extern unsigned int pci_probe;
>>  extern unsigned long pirq_table_addr;
>> @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn);
>>  
>>  /* pci-irq.c */
>>  
>> +struct pci_dev;
>> +
>>  struct irq_info {
>>  	u8 bus, devfn;			/* Bus, device and function */
>>  	struct {
>> @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val)
>>  # define x86_default_pci_init_irq	NULL
>>  # define x86_default_pci_fixup_irqs	NULL
>>  #endif
>> +
>> +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI)
>> +extern bool pci_use_e820;
>> +#else
>> +#define pci_use_e820 false
>> +#endif
>> diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
>> index 9b9fb7882c20..e8dc9bc327bd 100644
>> --- a/arch/x86/kernel/resource.c
>> +++ b/arch/x86/kernel/resource.c
>> @@ -1,6 +1,7 @@
>>  // SPDX-License-Identifier: GPL-2.0
>>  #include <linux/ioport.h>
>>  #include <asm/e820/api.h>
>> +#include <asm/pci_x86.h>
>>  
>>  static void resource_clip(struct resource *res, resource_size_t start,
>>  			  resource_size_t end)
>> @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail)
>>  	int i;
>>  	struct e820_entry *entry;
>>  
>> +	if (!pci_use_e820)
>> +		return;
>> +
>>  	for (i = 0; i < e820_table->nr_entries; i++) {
>>  		entry = &e820_table->entries[i];
>>  
>> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
>> index 948656069cdd..6c2febe84b6f 100644
>> --- a/arch/x86/pci/acpi.c
>> +++ b/arch/x86/pci/acpi.c
>> @@ -21,6 +21,8 @@ struct pci_root_info {
>>  
>>  static bool pci_use_crs = true;
>>  static bool pci_ignore_seg = false;
>> +/* Consumed in arch/x86/kernel/resource.c */
>> +bool pci_use_e820 = false;
>>  
>>  static int __init set_use_crs(const struct dmi_system_id *id)
>>  {
>> @@ -160,6 +162,33 @@ void __init pci_acpi_crs_quirks(void)
>>  	       "if necessary, use \"pci=%s\" and report a bug\n",
>>  	       pci_use_crs ? "Using" : "Ignoring",
>>  	       pci_use_crs ? "nocrs" : "use_crs");
>> +
>> +	/*
>> +	 * Some BIOS-es contain a bug where they add addresses which map to system
>> +	 * RAM in the PCI bridge memory window returned by the ACPI _CRS method, see
>> +	 * commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address space").
>> +	 * To avoid this Linux by default excludes E820 reservations when allocating
>> +	 * addresses since 2010. Windows however ignores E820 reserved regions for
>> +	 * PCI mem allocations, so in hindsight Linux honoring them is a problem.
>> +	 * In 2020 some systems have shown-up with E820 reservations which cover the
>> +	 * entire _CRS returned PCI bridge memory window, causing all attempts to
>> +	 * assign memory to PCI BARs to fail if Linux honors the E820 reservations.
>> +	 *
>> +	 * Ideally Linux would fully stop honoring E820 reservations for PCI mem
>> +	 * allocations, but then the old systems this was added for will regress.
>> +	 * Instead keep the old behavior for old systems, while ignoring the E820
>> +	 * reservations like Windows does for any systems from now on.
> 
> Wrap this to fit in 80 columns like the rest of the file.  More
> important for the file to be internally consistent than any new
> guidelines.

Already fixed in v4 (the only change in v4). I'll also drop the "Windows..."
sentence which you did not like in the commit msg for v5.

> 
>> +	 */
>> +	if (year >= 0 && year < 2018)
>> +		pci_use_e820 = true;
>> +
>> +	if (pci_probe & PCI_NO_E820)
>> +		pci_use_e820 = false;
>> +	else if (pci_probe & PCI_USE_E820)
>> +		pci_use_e820 = true;
>> +
>> +	printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n",
>> +	       pci_use_e820 ? "Honoring" : "Ignoring");
>>  }
>>  
>>  #ifdef	CONFIG_PCI_MMCONFIG
>> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
>> index 3507f456fcd0..091ec7e94fcb 100644
>> --- a/arch/x86/pci/common.c
>> +++ b/arch/x86/pci/common.c
>> @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str)
>>  	} else if (!strcmp(str, "nocrs")) {
>>  		pci_probe |= PCI_ROOT_NO_CRS;
>>  		return NULL;
>> +	} else if (!strcmp(str, "use_e820")) {
>> +		pci_probe |= PCI_USE_E820;
>> +		return NULL;
>> +	} else if (!strcmp(str, "no_e820")) {
>> +		pci_probe |= PCI_NO_E820;
>> +		return NULL;
> 
> Why does pci_probe have to be involved here?  Couldn't we just set
> pci_use_e820 directly?

This code runs early on, before the heuristics which set
pci_use_e820 gets set based on the BIOS year, so this is
done indirectly so that the code doing the heuristics
(and checking DMI quirks/exceptions if we add any)
can set a default and then these flags are checked to
override the default.

> Same argument applies to PCI_USE__CRS and PCI_ROOT_NO_CRS of course,
> and I probably added those, so maybe there was a reason, or maybe I
> just screwed up that too.

What I wrote above, also applies to the use_crs handling, which is
handled the same for the same reason :)

Regards,

Hans




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux