On Tue, Sep 14, 2021 at 07:16:04PM +0300, Laurentiu Tudor wrote:
>
>
> On 9/14/2021 5:50 PM, Greg KH wrote:
> > On Tue, Sep 14, 2021 at 05:44:09PM +0300, laurentiu.tudor@xxxxxxx wrote:
> >> From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> >>
> >> software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed
> >> software nodes, thus leading to underflow errors. Balance the refcount by
> >> bumping it in the device_create_managed_software_node() function.
> >>
> >> The error [1] was encountered after adding a .shutdown() op to our
> >> fsl-mc-bus driver.
> >>
> >> [1]
> >> pc : refcount_warn_saturate+0xf8/0x150
> >> lr : refcount_warn_saturate+0xf8/0x150
> >> sp : ffff80001009b920
> >> x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000
> >> x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030
> >> x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000
> >> x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff
> >> x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607
> >> x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17
> >> x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670
> >> x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670
> >> x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
> >> x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000
> >> Call trace:
> >> refcount_warn_saturate+0xf8/0x150
> >> kobject_put+0x10c/0x120
> >> software_node_notify+0xd8/0x140
> >> device_platform_notify+0x4c/0xb4
> >> device_del+0x188/0x424
> >> fsl_mc_device_remove+0x2c/0x4c
> >> rebofind sp.c__fsl_mc_device_remove+0x14/0x2c
> >> device_for_each_child+0x5c/0xac
> >> dprc_remove+0x9c/0xc0
> >> fsl_mc_driver_remove+0x28/0x64
> >> __device_release_driver+0x188/0x22c
> >> device_release_driver+0x30/0x50
> >> bus_remove_device+0x128/0x134
> >> device_del+0x16c/0x424
> >> fsl_mc_bus_remove+0x8c/0x114
> >> fsl_mc_bus_shutdown+0x14/0x20
> >> platform_shutdown+0x28/0x40
> >> device_shutdown+0x15c/0x330
> >> __do_sys_reboot+0x218/0x2a0
> >> __arm64_sys_reboot+0x28/0x34
> >> invoke_syscall+0x48/0x114
> >> el0_svc_common+0x40/0xdc
> >> do_el0_svc+0x2c/0x94
> >> el0_svc+0x2c/0x54
> >> el0t_64_sync_handler+0xa8/0x12c
> >> el0t_64_sync+0x198/0x19c
> >> ---[ end trace 32eb1c71c7d86821 ]---
> >>
> >> Reported-by: Jon Nettleton <jon@xxxxxxxxxxxxx>
> >> Suggested-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> >> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> >> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> >> ---
> >> Changes since v1:
> >> - added Heikki's Reviewed-by: (Thanks!)
> >>
> >> Changes since RFC:
> >> - use software_node_notify(KOBJ_ADD) instead of directly bumping
> >> refcount (Heikki)
> >>
> >> drivers/base/swnode.c | 3 +++
> >> 1 file changed, 3 insertions(+)
> >>
> >> diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
> >> index d1f1a8240120..bdb50a06c82a 100644
> >> --- a/drivers/base/swnode.c
> >> +++ b/drivers/base/swnode.c
> >> @@ -1113,6 +1113,9 @@ int device_create_managed_software_node(struct device *dev,
> >> to_swnode(fwnode)->managed = true;
> >> set_secondary_fwnode(dev, fwnode);
> >>
> >> + if (device_is_registered(dev))
> >> + software_node_notify(dev, KOBJ_ADD);
> >> +
> >> return 0;
> >> }
> >> EXPORT_SYMBOL_GPL(device_create_managed_software_node);
> >> --
> >> 2.17.1
> >>
> >
> > I am seeing that this needs to go into 5.15-final, but how about any
> > further back? Stable kernels?
>
> I think that's a good point. I can resend and Cc: stable if everyone's
> fine with that.
>
> > Does this "fix" a specific commit?
>
> I did not found a certain commit that introduced the breakage so don't
> know what to say here. I'd let more experienced people comment on this.
This fixes the commit that introduced the function, so:
Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()")
thanks,
--
heikki
