DSA supports connecting to a phy-handle, and has a fallback to a non-OF
based method of connecting to an internal PHY on the switch's own MDIO
bus, if no phy-handle and no fixed-link nodes were present.
The -ENODEV error code from the first attempt (phylink_of_phy_connect)
is what triggers the second attempt (phylink_connect_phy).
However, when the first attempt returns a different error code than
-ENODEV, this results in an unbalance of calls to phylink_create and
phylink_destroy by the time we exit the function. The phylink instance
has leaked.
There are many other error codes that can be returned by
phylink_of_phy_connect. For example, phylink_validate returns -EINVAL.
So this is a practical issue too.
Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
I know, I will send this bug fix to "net" too, this is provided just for
testing purposes, and for the completeness of the patch set.
net/dsa/slave.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index a7a114b9cb77..8a395290267c 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1856,13 +1856,11 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
* use the switch internal MDIO bus instead
*/
ret = dsa_slave_phy_connect(slave_dev, dp->index, phy_flags);
- if (ret) {
- netdev_err(slave_dev,
- "failed to connect to port %d: %d\n",
- dp->index, ret);
- phylink_destroy(dp->pl);
- return ret;
- }
+ }
+ if (ret) {
+ netdev_err(slave_dev, "failed to connect to PHY: %pe\n",
+ ERR_PTR(ret));
+ phylink_destroy(dp->pl);
}
return ret;
--
2.25.1
