Now that there is a bcm2711 quirk, it needs to be enabled when the
MCFG is missing. Use an ACPI namespace _DSD property
"linux-ecam-quirk-id" as an alternative to the MCFG OEM.
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/acpi/pci_mcfg.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 53cab975f612..04c517418365 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -169,6 +169,9 @@ static struct mcfg_fixup mcfg_quirks[] = {
ALTRA_ECAM_QUIRK(1, 13),
ALTRA_ECAM_QUIRK(1, 14),
ALTRA_ECAM_QUIRK(1, 15),
+
+ { "bc2711", "", 0, 0, MCFG_BUS_ANY, &bcm2711_pcie_ops,
+ DEFINE_RES_MEM(0xFD500000, 0xA000) },
};
static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
@@ -198,8 +201,22 @@ static void pci_mcfg_apply_quirks(struct acpi_pci_root *root,
u16 segment = root->segment;
struct resource *bus_range = &root->secondary;
struct mcfg_fixup *f;
+ const char *soc;
int i;
+ /*
+ * This may be a machine with a PCI/SMC conduit, which means it doesn't
+ * have an MCFG. Use an ACPI namespace definition instead.
+ */
+ if (!fwnode_property_read_string(acpi_fwnode_handle(root->device),
+ "linux-ecam-quirk-id", &soc)) {
+ if (strlen(soc) != ACPI_OEM_ID_SIZE)
+ dev_err(&root->device->dev, "ECAM quirk should be %d characters\n",
+ ACPI_OEM_ID_SIZE);
+ else
+ memcpy(mcfg_oem_id, soc, ACPI_OEM_ID_SIZE);
+ }
+
for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
if (pci_mcfg_quirk_matches(f, segment, bus_range)) {
if (f->cfgres.start)
--
2.31.1
