[AMD Official Use Only]
Adding few more folks
-----Original Message-----
From: Hans de Goede <hdegoede@xxxxxxxxxx>
Sent: Sunday, August 1, 2021 3:17 PM
To: Stephen MacNeil <macneisj@xxxxxxxxx>; Limonciello, Mario <Mario.Limonciello@xxxxxxx>; Rafael J . Wysocki <rjw@xxxxxxxxxxxxx>
Cc: Linux PM <linux-pm@xxxxxxxxxxxxxxx>; linux-acpi <linux-acpi@xxxxxxxxxxxxxxx>
Subject: AMD laptops defaulting to S3 instead of S0ix (was amd_sfh)
Hi Rafael, Mario,
Stephen is having an issue with a recent AMD laptop (a Lenovo Ideapad model) where Linux defaults to using S3/deep suspend instead of S0ix/s2idle.
This is causing the sensors provided by the AMD Sensor Fusion Hub to stop working after a suspend/resume. Adding mem_sleep_default=s2idle to the kernel commandline fixes this.
Do you have any idea what might be causing this ?
Regards,
Hans
On 7/31/21 2:31 PM, Stephen MacNeil wrote:
> I wrote Basavaraj Natikar the new maintainer of amd_sfh for the kernel, after sending the information he wanted his reply was...
>
>>>Thanks Stephen MacNeil,
>
> On our hardware we do not see any amd_sfh issue with 5.14.0-rc2 kernel.
>
> Could you please check with Lenovo, as we are not observing amd_sfh issue on our reference platforms too.
>
> Thanks,
> Basavaraj
> <<
> looking at the information I sent him i looks like the issue is (to
> me anyway)
>
> cat /sys/power/mem_sleep
> [s2idle] deep
>
> without
> cat /sys/power/mem_sleep
> s2idle [deep]
>
>
> this is the info he requested... any idea who else I can contact.
> this is the output with and without the kernel param
>
>
>
> Thanks a lot Stephen MacNeil for the information.
>
>
>
> Could you please provide me below information:-
>
> · what version of kernel is running.
>
> uname -a
> Linux ideapad 5.14.0-051400rc2-generic #202107182230 SMP Sun Jul 18
> 22:34:12 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>
>
> · Are you using latest patches from amd-sfh
>
> only the kernel
>
> · Could you please provide me output of /sys/power/mem_sleep
>
> with kernel option mem_sleep_default=s2idle
>
> cat /sys/power/mem_sleep
> [s2idle] deep
>
> without
> cat /sys/power/mem_sleep
> s2idle [deep]
>
> · Could you please provide output of below script after installing
> "apt install iasl*". acpica-tools
>
> with kernel option mem_sleep_default=s2idle
>
> Intel ACPI Component Architecture
> ASL+ Optimizing Compiler/Disassembler version 20190509
> Copyright (c) 2000 - 2019 Intel Corporation
>
> File appears to be binary: found 265 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file apic.dat, Length 0x138 (312) bytes
> ACPI: APIC 0x0000000000000000 000138 (v02 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [APIC] decoded Formatted output:
> apic.dsl - 16071 bytes File appears to be binary: found 40 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file batb.dat, Length 0x4A (74) bytes
> ACPI: BATB 0x0000000000000000 00004A (v02 LENOVO CB-01 00000000
> LENO 00000001) Unknown ACPI table signature [BATB], decoding ACPI
> table header only Acpi Data Table [BATB] decoded Formatted output:
> batb.dsl - 1274 bytes File appears to be binary: found 31 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file bgrt.dat, Length 0x38 (56) bytes
> ACPI: BGRT 0x0000000000000000 000038 (v01 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [BGRT] decoded Formatted output:
> bgrt.dsl - 1606 bytes File appears to be binary: found 16 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file cdit.dat, Length 0x29 (41) bytes
> ACPI: CDIT 0x0000000000000000 000029 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [CDIT], decoding ACPI
> table header only Acpi Data Table [CDIT] decoded Formatted output:
> cdit.dsl - 1115 bytes File appears to be binary: found 2765 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file crat.dat, Length 0xB80 (2944) bytes
> ACPI: CRAT 0x0000000000000000 000B80 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [CRAT], decoding ACPI
> table header only Acpi Data Table [CRAT] decoded Formatted output:
> crat.dsl - 15424 bytes File appears to be binary: found 15189
> non-ASCII characters, disassembling Binary file appears to be a valid
> ACPI table, disassembling Input file dsdt.dat, Length 0xAE9B (44699)
> bytes
> ACPI: DSDT 0x0000000000000000 00AE9B (v01 LENOVO AMD 00001000
> INTL 20180313) Pass 1 parse of [DSDT] Pass 2 parse of [DSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: dsdt.dsl - 384071 bytes File appears to be binary:
> found 229 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file facp.dat, Length 0x10C
> (268) bytes
> ACPI: FACP 0x0000000000000000 00010C (v05 LENOVO CB-01 00000003
> LENO 00000001) Acpi Data Table [FACP] decoded Formatted output:
> facp.dsl - 10098 bytes File appears to be binary: found 59 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file facs.dat, Length 0x40 (64) bytes
> ACPI: FACS 0x0000000000000000 000040
> Acpi Data Table [FACS] decoded
> Formatted output: facs.dsl - 1368 bytes File appears to be binary:
> found 28 non-ASCII characters, disassembling Binary file appears to be
> a valid ACPI table, disassembling Input file fpdt.dat, Length 0x34
> (52) bytes
> ACPI: FPDT 0x0000000000000000 000034 (v01 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [FPDT] decoded Formatted output:
> fpdt.dsl - 1452 bytes File appears to be binary: found 30 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file hpet.dat, Length 0x38 (56) bytes
> ACPI: HPET 0x0000000000000000 000038 (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [HPET] decoded Formatted output:
> hpet.dsl - 1865 bytes File appears to be binary: found 279 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file ivrs.dat, Length 0x1A4 (420) bytes
> ACPI: IVRS 0x0000000000000000 0001A4 (v02 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [IVRS] decoded Formatted output:
> ivrs.dsl - 6001 bytes File appears to be binary: found 36 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file mcfg.dat, Length 0x3C (60) bytes
> ACPI: MCFG 0x0000000000000000 00003C (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [MCFG] decoded Formatted output:
> mcfg.dsl - 1526 bytes File appears to be binary: found 32 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file msdm.dat, Length 0x55 (85) bytes
> ACPI: MSDM 0x0000000000000000 000055 (v03 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [MSDM] decoded Formatted output:
> msdm.dsl - 1557 bytes File appears to be binary: found 25 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file sbst.dat, Length 0x30 (48) bytes
> ACPI: SBST 0x0000000000000000 000030 (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [SBST] decoded Formatted output:
> sbst.dsl - 1282 bytes File appears to be binary: found 410 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file ssdt10.dat, Length 0x47F (1151) bytes
> ACPI: SSDT 0x0000000000000000 00047F (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt10.dsl - 5673 bytes File appears to be binary:
> found 708 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt11.dat, Length
> 0xC1D (3101) bytes
> ACPI: SSDT 0x0000000000000000 000C1D (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt11.dsl - 15424 bytes File appears to be binary:
> found 848 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt12.dat, Length
> 0x9AD (2477) bytes
> ACPI: SSDT 0x0000000000000000 0009AD (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt12.dsl - 12474 bytes File appears to be binary:
> found 9207 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt1.dat, Length
> 0x7216 (29206) bytes
> ACPI: SSDT 0x0000000000000000 007216 (v02 LENOVO AmdTable 00000002
> MSFT 04000000) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt1.dsl - 208699 bytes File appears to be binary:
> found 3968 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt2.dat, Length
> 0x1500 (5376) bytes
> ACPI: SSDT 0x0000000000000000 001500 (v01 LENOVO AmdTable 00000001 AMD
> 00000001) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt2.dsl - 59265 bytes File appears to be binary:
> found 449 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt3.dat, Length
> 0x53A (1338) bytes
> ACPI: SSDT 0x0000000000000000 00053A (v01 LENOVO Tpm2Tabl 00009999
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt3.dsl - 10738 bytes File appears to be binary:
> found 474 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt4.dat, Length
> 0x64C (1612) bytes
> ACPI: SSDT 0x0000000000000000 00064C (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt4.dsl - 8258 bytes
> File appears to be binary: found 400 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file ssdt5.dat, Length 0x480 (1152) bytes
> ACPI: SSDT 0x0000000000000000 000480 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt5.dsl - 5582 bytes
> File appears to be binary: found 1140 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file ssdt6.dat, Length 0x1497 (5271) bytes
> ACPI: SSDT 0x0000000000000000 001497 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt6.dsl - 20293 bytes File appears to be binary:
> found 1314 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt7.dat, Length
> 0x1576 (5494) bytes
> ACPI: SSDT 0x0000000000000000 001576 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt7.dsl - 30076 bytes File appears to be binary:
> found 4095 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt8.dat, Length
> 0x353C (13628) bytes
> ACPI: SSDT 0x0000000000000000 00353C (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt8.dsl - 78242 bytes File appears to be binary:
> found 74 non-ASCII characters, disassembling Binary file appears to be
> a valid ACPI table, disassembling Input file ssdt9.dat, Length 0x90
> (144) bytes
> ACPI: SSDT 0x0000000000000000 000090 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt9.dsl - 1767 bytes
> File appears to be binary: found 32 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file tpm2.dat, Length 0x38 (56) bytes
> ACPI: TPM2 0x0000000000000000 000038 (v04 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [TPM2] decoded Formatted output:
> tpm2.dsl - 1515 bytes File appears to be binary: found 189 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file uefi.dat, Length 0x12A (298) bytes
> ACPI: UEFI 0x0000000000000000 00012A (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [UEFI] decoded Formatted output:
> uefi.dsl - 2505 bytes File appears to be binary: found 37100 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file vfct.dat, Length 0xD484 (54404) bytes
> ACPI: VFCT 0x0000000000000000 00D484 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [VFCT], decoding ACPI
> table header only Acpi Data Table [VFCT] decoded Formatted output:
> vfct.dsl - 269557 bytes File appears to be binary: found 17 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file wsmt.dat, Length 0x28 (40) bytes
> ACPI: WSMT 0x0000000000000000 000028 (v01 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [WSMT] decoded Formatted output:
> wsmt.dsl - 1313 bytes Low Power S0 Idle is 0 The system does not
> support S0ix!
>
>
> without
>
> Intel ACPI Component Architecture
> ASL+ Optimizing Compiler/Disassembler version 20190509
> Copyright (c) 2000 - 2019 Intel Corporation
>
> File appears to be binary: found 265 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file apic.dat, Length 0x138 (312) bytes
> ACPI: APIC 0x0000000000000000 000138 (v02 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [APIC] decoded Formatted output:
> apic.dsl - 16071 bytes File appears to be binary: found 40 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file batb.dat, Length 0x4A (74) bytes
> ACPI: BATB 0x0000000000000000 00004A (v02 LENOVO CB-01 00000000
> LENO 00000001) Unknown ACPI table signature [BATB], decoding ACPI
> table header only Acpi Data Table [BATB] decoded Formatted output:
> batb.dsl - 1274 bytes File appears to be binary: found 31 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file bgrt.dat, Length 0x38 (56) bytes
> ACPI: BGRT 0x0000000000000000 000038 (v01 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [BGRT] decoded Formatted output:
> bgrt.dsl - 1606 bytes File appears to be binary: found 16 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file cdit.dat, Length 0x29 (41) bytes
> ACPI: CDIT 0x0000000000000000 000029 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [CDIT], decoding ACPI
> table header only Acpi Data Table [CDIT] decoded Formatted output:
> cdit.dsl - 1115 bytes File appears to be binary: found 2765 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file crat.dat, Length 0xB80 (2944) bytes
> ACPI: CRAT 0x0000000000000000 000B80 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [CRAT], decoding ACPI
> table header only Acpi Data Table [CRAT] decoded Formatted output:
> crat.dsl - 15424 bytes File appears to be binary: found 15189
> non-ASCII characters, disassembling Binary file appears to be a valid
> ACPI table, disassembling Input file dsdt.dat, Length 0xAE9B (44699)
> bytes
> ACPI: DSDT 0x0000000000000000 00AE9B (v01 LENOVO AMD 00001000
> INTL 20180313) Pass 1 parse of [DSDT] Pass 2 parse of [DSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: dsdt.dsl - 384071 bytes File appears to be binary:
> found 229 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file facp.dat, Length 0x10C
> (268) bytes
> ACPI: FACP 0x0000000000000000 00010C (v05 LENOVO CB-01 00000003
> LENO 00000001) Acpi Data Table [FACP] decoded Formatted output:
> facp.dsl - 10098 bytes File appears to be binary: found 59 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file facs.dat, Length 0x40 (64) bytes
> ACPI: FACS 0x0000000000000000 000040
> Acpi Data Table [FACS] decoded
> Formatted output: facs.dsl - 1368 bytes File appears to be binary:
> found 28 non-ASCII characters, disassembling Binary file appears to be
> a valid ACPI table, disassembling Input file fpdt.dat, Length 0x34
> (52) bytes
> ACPI: FPDT 0x0000000000000000 000034 (v01 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [FPDT] decoded Formatted output:
> fpdt.dsl - 1452 bytes File appears to be binary: found 30 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file hpet.dat, Length 0x38 (56) bytes
> ACPI: HPET 0x0000000000000000 000038 (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [HPET] decoded Formatted output:
> hpet.dsl - 1865 bytes File appears to be binary: found 279 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file ivrs.dat, Length 0x1A4 (420) bytes
> ACPI: IVRS 0x0000000000000000 0001A4 (v02 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [IVRS] decoded Formatted output:
> ivrs.dsl - 6001 bytes File appears to be binary: found 36 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file mcfg.dat, Length 0x3C (60) bytes
> ACPI: MCFG 0x0000000000000000 00003C (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [MCFG] decoded Formatted output:
> mcfg.dsl - 1526 bytes File appears to be binary: found 32 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file msdm.dat, Length 0x55 (85) bytes
> ACPI: MSDM 0x0000000000000000 000055 (v03 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [MSDM] decoded Formatted output:
> msdm.dsl - 1557 bytes File appears to be binary: found 25 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file sbst.dat, Length 0x30 (48) bytes
> ACPI: SBST 0x0000000000000000 000030 (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [SBST] decoded Formatted output:
> sbst.dsl - 1282 bytes File appears to be binary: found 410 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file ssdt10.dat, Length 0x47F (1151) bytes
> ACPI: SSDT 0x0000000000000000 00047F (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt10.dsl - 5673 bytes File appears to be binary:
> found 708 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt11.dat, Length
> 0xC1D (3101) bytes
> ACPI: SSDT 0x0000000000000000 000C1D (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt11.dsl - 15424 bytes File appears to be binary:
> found 848 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt12.dat, Length
> 0x9AD (2477) bytes
> ACPI: SSDT 0x0000000000000000 0009AD (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt12.dsl - 12474 bytes File appears to be binary:
> found 9207 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt1.dat, Length
> 0x7216 (29206) bytes
> ACPI: SSDT 0x0000000000000000 007216 (v02 LENOVO AmdTable 00000002
> MSFT 04000000) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt1.dsl - 208699 bytes File appears to be binary:
> found 3968 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt2.dat, Length
> 0x1500 (5376) bytes
> ACPI: SSDT 0x0000000000000000 001500 (v01 LENOVO AmdTable 00000001 AMD
> 00000001) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt2.dsl - 59265 bytes File appears to be binary:
> found 449 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt3.dat, Length
> 0x53A (1338) bytes
> ACPI: SSDT 0x0000000000000000 00053A (v01 LENOVO Tpm2Tabl 00009999
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt3.dsl - 10738 bytes File appears to be binary:
> found 474 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt4.dat, Length
> 0x64C (1612) bytes
> ACPI: SSDT 0x0000000000000000 00064C (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt4.dsl - 8258 bytes
> File appears to be binary: found 400 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file ssdt5.dat, Length 0x480 (1152) bytes
> ACPI: SSDT 0x0000000000000000 000480 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt5.dsl - 5582 bytes
> File appears to be binary: found 1140 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file ssdt6.dat, Length 0x1497 (5271) bytes
> ACPI: SSDT 0x0000000000000000 001497 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt6.dsl - 20293 bytes File appears to be binary:
> found 1314 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt7.dat, Length
> 0x1576 (5494) bytes
> ACPI: SSDT 0x0000000000000000 001576 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt7.dsl - 30076 bytes File appears to be binary:
> found 4095 non-ASCII characters, disassembling Binary file appears to
> be a valid ACPI table, disassembling Input file ssdt8.dat, Length
> 0x353C (13628) bytes
> ACPI: SSDT 0x0000000000000000 00353C (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt8.dsl - 78242 bytes File appears to be binary:
> found 74 non-ASCII characters, disassembling Binary file appears to be
> a valid ACPI table, disassembling Input file ssdt9.dat, Length 0x90
> (144) bytes
> ACPI: SSDT 0x0000000000000000 000090 (v01 LENOVO AmdTable 00000001
> INTL 20180313) Pass 1 parse of [SSDT] Pass 2 parse of [SSDT] Parsing
> Deferred Opcodes (Methods/Buffers/Packages/Regions)
>
> Parsing completed
> Disassembly completed
> ASL Output: ssdt9.dsl - 1767 bytes
> File appears to be binary: found 32 non-ASCII characters,
> disassembling Binary file appears to be a valid ACPI table,
> disassembling Input file tpm2.dat, Length 0x38 (56) bytes
> ACPI: TPM2 0x0000000000000000 000038 (v04 LENOVO CB-01 00000002
> LENO 00000001) Acpi Data Table [TPM2] decoded Formatted output:
> tpm2.dsl - 1515 bytes File appears to be binary: found 189 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file uefi.dat, Length 0x12A (298) bytes
> ACPI: UEFI 0x0000000000000000 00012A (v01 LENOVO CB-01 00000001
> LENO 00000001) Acpi Data Table [UEFI] decoded Formatted output:
> uefi.dsl - 2505 bytes File appears to be binary: found 37100 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file vfct.dat, Length 0xD484 (54404) bytes
> ACPI: VFCT 0x0000000000000000 00D484 (v01 LENOVO CB-01 00000001
> LENO 00000001) Unknown ACPI table signature [VFCT], decoding ACPI
> table header only Acpi Data Table [VFCT] decoded Formatted output:
> vfct.dsl - 269557 bytes File appears to be binary: found 17 non-ASCII
> characters, disassembling Binary file appears to be a valid ACPI
> table, disassembling Input file wsmt.dat, Length 0x28 (40) bytes
> ACPI: WSMT 0x0000000000000000 000028 (v01 LENOVO CB-01 00000000
> LENO 00000001) Acpi Data Table [WSMT] decoded Formatted output:
> wsmt.dsl - 1313 bytes Low Power S0 Idle is 0 The system does not
> support S0ix!
>
>
> #################################################
> #!/bin/bash
>
> cd /var/tmp/
>
> acpidump -b
>
> iasl -d *.dat
>
> lp=$(grep "Low Power S0 Idle" /var/tmp/facp.dsl | awk '{print $(NF)}')
>
> if [ "$lp" -eq 1 ]; then
>
> echo "Low Power S0 Idle is" $lp
>
> echo "The system supports S0ix!"
>
> else
>
> echo "Low Power S0 Idle is" $lp
>
> echo "The system does not support S0ix!"
>
> fi
>
>
>
> Thanks,
>
> Basavaraj
>
>
>
>
> --
> Stephen MacNeil
> 905 334 5092
> mglessons.com
> <https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmglessons.com%2F&data=04%7C01%7CNehal-bakulchandra.Shah%40amd.com%7C64a299468a7047508e7308d954d15362%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637634080305647130%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=deJr%2FVlbHHTyu%2BYTUma%2BpVhmAMtF%2B968z1hIai%2Bpdug%3D&reserved=0>
