From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx> It is inconsistent to return PCI_D0 from pci_target_state() instead of the original target state if 'wakeup' is true and the device cannot signal PME from D0. This only happens when the device cannot signal PME from the original target state and any shallower power states (including D0) and that case is effectively equivalent to the one in which PME singaling is not supported at all. Since the original target state is returned in the latter case, make the function do that in the former one too. Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/ Fixes: 666ff6f83e1d ("PCI/PM: Avoid using device_may_wakeup() for runtime PM") Reported-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Reported-by: Utkarsh H Patel <utkarsh.h.patel@xxxxxxxxx> Reported-by: Koba Ko <koba.ko@xxxxxxxxxxxxx> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx> --- v1 -> v1.1 * Resend under a suitable subject. --- drivers/pci/pci.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -2595,16 +2595,20 @@ static pci_power_t pci_target_state(stru if (dev->current_state == PCI_D3cold) target_state = PCI_D3cold; - if (wakeup) { + if (wakeup && dev->pme_support) { + pci_power_t state = target_state; + /* * Find the deepest state from which the device can generate * PME#. */ - if (dev->pme_support) { - while (target_state - && !(dev->pme_support & (1 << target_state))) - target_state--; - } + while (state && !(dev->pme_support & (1 << state))) + state--; + + if (state) + return state; + else if (dev->pme_support & 1) + return PCI_D0; } return target_state;
