Re: [PATCH] ACPI: SPCR: Add new 16550-compatible Serial Port Subtype

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pt., 25 cze 2021 o 19:20 Rafael J. Wysocki <rafael@xxxxxxxxxx> napisał(a):
>
> On Fri, Jun 25, 2021 at 7:18 PM Marcin Wojtas <mw@xxxxxxxxxxxx> wrote:
> >
> > Hi,
> >
> > pon., 21 cze 2021 o 22:06 Marcin Wojtas <mw@xxxxxxxxxxxx> napisał(a):
> > >
> > > Apologies for the patch prefix, of course it's a first version and
> > > unrelated to the networking subsystem.
> > >
> > > Best regards,
> > > Marcin
> > >
> > >
> > > pon., 21 cze 2021 o 22:05 Marcin Wojtas <mw@xxxxxxxxxxxx> napisał(a):
> > > >
> > > > The Microsoft Debug Port Table 2 (DBG2) specification revision
> > > > May 31, 2017 adds support for 16550-compatible Serial Port
> > > > Subtype with parameters defined in Generic Address Structure (GAS) [1]
> > > >
> > > > Add its support in SPCR parsing routine.
> > > >
> > > > [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
> > > >
> > > > Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
> > > > ---
> > > >  include/acpi/actbl1.h | 1 +
> > > >  drivers/acpi/spcr.c   | 1 +
> > > >  2 files changed, 2 insertions(+)
> > > >
> > > > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
> > > > index ce59903c2695..f746012eba8d 100644
> > > > --- a/include/acpi/actbl1.h
> > > > +++ b/include/acpi/actbl1.h
> > > > @@ -498,6 +498,7 @@ struct acpi_dbg2_device {
> > > >  #define ACPI_DBG2_ARM_SBSA_GENERIC  0x000E
> > > >  #define ACPI_DBG2_ARM_DCC           0x000F
> > > >  #define ACPI_DBG2_BCM2835           0x0010
> > > > +#define ACPI_DBG2_16550_WITH_GAS    0x0012
> > > >
> > > >  #define ACPI_DBG2_1394_STANDARD     0x0000
> > > >
> > > > diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> > > > index 88460bacd5ae..25c2d0be953e 100644
> > > > --- a/drivers/acpi/spcr.c
> > > > +++ b/drivers/acpi/spcr.c
> > > > @@ -136,6 +136,7 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
> > > >                 break;
> > > >         case ACPI_DBG2_16550_COMPATIBLE:
> > > >         case ACPI_DBG2_16550_SUBSET:
> > > > +       case ACPI_DBG2_16550_WITH_GAS:
> > > >                 uart = "uart";
> > > >                 break;
> > > >         default:
> > > > --
> >
> > Do you have any comments / remarks to the patch?
>
> Yes, I do, but I will get back to you next week.
>

Great, thank you!

Marcin




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux