On Mon, Jun 21, 2021 at 9:27 PM Salvatore Bonaccorso <carnil@xxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Mar 16, 2021 at 04:51:40PM +0100, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> >
> > It should not be necessary to update the current_state field of
> > struct pci_dev in pci_enable_device_flags() before calling
> > do_pci_enable_device() for the device, because none of the
> > code between that point and the pci_set_power_state() call in
> > do_pci_enable_device() invoked later depends on it.
> >
> > Moreover, doing that is actively harmful in some cases. For example,
> > if the given PCI device depends on an ACPI power resource whose _STA
> > method initially returns 0 ("off"), but the config space of the PCI
> > device is accessible and the power state retrieved from the
> > PCI_PM_CTRL register is D0, the current_state field in the struct
> > pci_dev representing that device will get out of sync with the
> > power.state of its ACPI companion object and that will lead to
> > power management issues going forward.
> >
> > To avoid such issues it is better to leave the current_state value
> > as is until it is changed to PCI_D0 by do_pci_enable_device() as
> > appropriate. However, the power state of the device is not changed
> > to PCI_D0 if it is already enabled when pci_enable_device_flags()
> > gets called for it, so update its current_state in that case, but
> > use pci_update_current_state() covering platform PM too for that.
> >
> > Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@xxxxxxxxx/
> > Reported-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
> > Tested-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > ---
> >
> > Max, I've added a T-by from you even though the patch is slightly different
> > from what you have tested, but the difference shouldn't matter for your case.
> >
> > ---
> > drivers/pci/pci.c | 16 +++-------------
> > 1 file changed, 3 insertions(+), 13 deletions(-)
> >
> > Index: linux-pm/drivers/pci/pci.c
> > ===================================================================
> > --- linux-pm.orig/drivers/pci/pci.c
> > +++ linux-pm/drivers/pci/pci.c
> > @@ -1870,20 +1870,10 @@ static int pci_enable_device_flags(struc
> > int err;
> > int i, bars = 0;
> >
> > - /*
> > - * Power state could be unknown at this point, either due to a fresh
> > - * boot or a device removal call. So get the current power state
> > - * so that things like MSI message writing will behave as expected
> > - * (e.g. if the device really is in D0 at enable time).
> > - */
> > - if (dev->pm_cap) {
> > - u16 pmcsr;
> > - pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> > - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
> > - }
> > -
> > - if (atomic_inc_return(&dev->enable_cnt) > 1)
> > + if (atomic_inc_return(&dev->enable_cnt) > 1) {
> > + pci_update_current_state(dev, dev->current_state);
> > return 0; /* already enabled */
> > + }
> >
> > bridge = pci_upstream_bridge(dev);
> > if (bridge)
>
> A user in Debian reported that this commit caused an issue, cf.
> https://bugs.debian.org/990008#10 with the e1000e driver failing to
> probe the device. It was reported as well to
> https://bugzilla.kernel.org/show_bug.cgi?id=213481
>
> According to the above and
> https://bugzilla.kernel.org/show_bug.cgi?id=213481#c2 reverting
> 4514d991d992 ("PCI: PM: Do not read power state in
> pci_enable_device_flags()") fixes the issue.
This commit has just been reverted.
We will try to address the original issue addressed by it in a different way.
Thanks!
