On Wed, Jun 16, 2021 at 9:52 PM Srinivas Pandruvada
<srinivas.pandruvada@xxxxxxxxxxxxxxx> wrote:
>
> This reverts commit bab858b30cbe5619038dd68ab89be469fff9861e.
>
> Some user reported issues with this change. Will resubmit for 5.15 cycle.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
I've dropped this commit completely, as it was the top-most one in the
DPTF branch.
Thanks!
> ---
> Documentation/ABI/testing/sysfs-platform-dptf | 42 -------------------
> drivers/acpi/dptf/dptf_pch_fivr.c | 9 ----
> 2 files changed, 51 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
> index bce1b745fc56..141834342a4d 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dptf
> +++ b/Documentation/ABI/testing/sysfs-platform-dptf
> @@ -111,45 +111,3 @@ Contact: linux-acpi@xxxxxxxxxxxxxxx
> Description:
> (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
> when FIVR clock is 38.4MHz.
> -
> -What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
> -Date: June, 2021
> -KernelVersion: v5.14
> -Contact: linux-acpi@xxxxxxxxxxxxxxx
> -Description:
> - (RO) PCH FIVR switching control frequency in the units of
> - XTAL_FREQ / 128, where XTAL_FREQ is the (product specific)
> - Crystal Oscillator frequency.
> -
> -What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
> -Date: June, 2021
> -KernelVersion: v5.14
> -Contact: linux-acpi@xxxxxxxxxxxxxxx
> -Description:
> - (RO) Read the FIVR switching frequency control fault status.
> -
> -What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
> -Date: June, 2021
> -KernelVersion: v5.14
> -Contact: linux-acpi@xxxxxxxxxxxxxxx
> -Description:
> - (RO) Presents SSC (spread spectrum clock) information for EMI
> - (Electro magnetic interference) control. This is a bit mask.
> - Bits Description
> - [7:0] Sets clock spectrum spread percentage:
> - 0x00=0.2% , 0x3F=10%
> - 1 LSB = 0.1% increase in spread (for
> - settings 0x01 thru 0x1C)
> - 1 LSB = 0.2% increase in spread (for
> - settings 0x1E thru 0x3F)
> - [8] When set to 1, enables spread
> - spectrum clock
> - [9] 0: Triangle mode. FFC frequency
> - walks around the Fcenter in a linear
> - fashion
> - 1: Random walk mode. FFC frequency
> - changes randomly within the SSC
> - (Spread spectrum clock) range
> - [10] 0: No white noise. 1: Add white noise
> - to spread waveform
> - [11] When 1, future writes are ignored.
> diff --git a/drivers/acpi/dptf/dptf_pch_fivr.c b/drivers/acpi/dptf/dptf_pch_fivr.c
> index 22c4ae0401ef..5fca18296bf6 100644
> --- a/drivers/acpi/dptf/dptf_pch_fivr.c
> +++ b/drivers/acpi/dptf/dptf_pch_fivr.c
> @@ -55,24 +55,15 @@ static ssize_t name##_store(struct device *dev,\
>
> PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
> PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
> -PCH_FIVR_SHOW(ssc_clock_info, GEMI)
> -PCH_FIVR_SHOW(fivr_switching_freq_mhz, GFCS)
> -PCH_FIVR_SHOW(fivr_switching_fault_status, GFFS)
> PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
> PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
>
> static DEVICE_ATTR_RW(freq_mhz_low_clock);
> static DEVICE_ATTR_RW(freq_mhz_high_clock);
> -static DEVICE_ATTR_RO(ssc_clock_info);
> -static DEVICE_ATTR_RO(fivr_switching_freq_mhz);
> -static DEVICE_ATTR_RO(fivr_switching_fault_status);
>
> static struct attribute *fivr_attrs[] = {
> &dev_attr_freq_mhz_low_clock.attr,
> &dev_attr_freq_mhz_high_clock.attr,
> - &dev_attr_ssc_clock_info.attr,
> - &dev_attr_fivr_switching_freq_mhz.attr,
> - &dev_attr_fivr_switching_fault_status.attr,
> NULL
> };
>
> --
> 2.30.2
>
