Re: [RFC v2-fix-v3 1/1] x86/tdx: Skip WBINVD instruction for TDX guest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 8, 2021 at 2:35 PM Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx> wrote:
>
> Current TDX spec does not have support to emulate the WBINVD
> instruction. So, add support to skip WBINVD instruction in
> drivers that are currently enabled in the TDX guest.
>
> Functionally only devices outside the CPU (such as DMA devices,
> or persistent memory for flushing) can notice the external side
> effects from WBINVD's cache flushing for write back mappings.
> One exception here is MKTME, but that is not visible outside
> the TDX module and not possible inside a TDX guest.
>
> Currently TDX does not support DMA, because DMA typically needs
> uncached access for MMIO, and the current TDX module always
> sets the IgnorePAT bit, which prevents that.
>
> Persistent memory is also currently not supported. Another code
> path that uses WBINVD is the MTRR driver, but EPT/virtualization
> always disables MTRRs so those are not needed. This all implies
> WBINVD is not needed with current TDX.

Let's drop the last three paragraphs and just say something like:
"This is one of a series of patches to usages of wbinvd for protected
guests. For now this just addresses the one known path that TDX
executes, ACPI reboot. Its usage can be elided because FOO reason and
all the other ACPI_FLUSH_CPU_CACHE usages can be elided because BAR
reason"

>
> So, most drivers/code-paths that use wbinvd instructions are
> already disabled for TDX guest platforms via config-option/BIOS.
> Following are the list of drivers that use wbinvd instruction
> and are still enabled for TDX guests.
>
> drivers/acpi/sleep.c
> drivers/acpi/acpica/hwsleep.c
>
> Since cache is always coherent in TDX guests, making wbinvd as
> noop should not cause any issues. This behavior is the same as
> KVM guest.
>
> Also, hwsleep shouldn't happen for TDX guest because the TDX
> BIOS won't enable it, but it's better to disable it anyways
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
> ---
>
> Changes since RFC v2-fix-v2:
>  * Instead of handling WBINVD #VE exception as nop, we skip its
>    usage in currently enabled drivers.
>  * Adapted commit log for above change.
>
>  arch/x86/kernel/tdx.c           |  1 +
>  drivers/acpi/acpica/hwsleep.c   | 12 +++++++++---
>  drivers/acpi/sleep.c            | 26 +++++++++++++++++++++++---
>  include/linux/protected_guest.h |  2 ++
>  4 files changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
> index 1caf9fa5bb30..e33928131e6a 100644
> --- a/arch/x86/kernel/tdx.c
> +++ b/arch/x86/kernel/tdx.c
> @@ -100,6 +100,7 @@ bool tdx_protected_guest_has(unsigned long flag)
>         case PR_GUEST_MEM_ENCRYPT_ACTIVE:
>         case PR_GUEST_UNROLL_STRING_IO:
>         case PR_GUEST_SHARED_MAPPING_INIT:
> +       case PR_GUEST_DISABLE_WBINVD:
>                 return true;
>         }
>
> diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
> index 14baa13bf848..9d40df1b8a74 100644
> --- a/drivers/acpi/acpica/hwsleep.c
> +++ b/drivers/acpi/acpica/hwsleep.c
> @@ -9,6 +9,7 @@
>   *****************************************************************************/
>
>  #include <acpi/acpi.h>
> +#include <linux/protected_guest.h>
>  #include "accommon.h"
>
>  #define _COMPONENT          ACPI_HARDWARE
> @@ -108,9 +109,14 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
>         pm1a_control |= sleep_enable_reg_info->access_bit_mask;
>         pm1b_control |= sleep_enable_reg_info->access_bit_mask;
>
> -       /* Flush caches, as per ACPI specification */
> -
> -       ACPI_FLUSH_CPU_CACHE();
> +       /*
> +        * WBINVD instruction is not supported in TDX
> +        * guest. Since ACPI_FLUSH_CPU_CACHE() uses
> +        * WBINVD, skip cache flushes for TDX guests.
> +        */
> +       if (prot_guest_has(PR_GUEST_DISABLE_WBINVD))
> +               /* Flush caches, as per ACPI specification */
> +               ACPI_FLUSH_CPU_CACHE();

ACPICA uses OS abstractions like ACPI_FLUSH_CPU_CACHE and Linux
patches rarely (never?) change ACPICA directly. If you want to change
ACPICA it goes through the ACPICA project first and is then
"Linux-ized", but in this case I believe you do not need to go that
path. Instead, this wants to change the definition of
ACPI_FLUSH_CPU_CACHE() directly in arch/x86/include/asm/acenv.h and
explain why the other ACPI cache flushing paths / requirements do not
apply to TDX guests.



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux