Re: [PATCH v2] ACPI : don't always override the acpi irq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 8, 2021 at 4:07 PM Hui Wang <hui.wang@xxxxxxxxxxxxx> wrote:
>
> The laptop keyboard doesn't work on many MEDION notebooks, but the
> keyboard works well under Windows and Unix.
>
> Through debugging, we found this log in the dmesg:
> ACPI: IRQ 1 override to edge, high
> pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>
> And we checked the IRQ definition in the DSDT, it is:
>     IRQ (Level, ActiveLow, Exclusive, )
>         {1}
>
> So the BIOS defines the keyboard irq to Level_Low, but the linux
> kernel override it to Edge_High. If let the linux kernel skip the irq
> override, the keyboard will work normally.
>
> From the existing comment in the acpi_dev_get_irqresource(), the
> override function only needs to be called when BIOS defines IRQ() or
> IRQNoFlags, and according to the Section 6.4.2.1 of ACPI 6.4 spec [1],
> if IRQ() is empty or defines IRQNoFlags, the IRQ is High true, edge
> sensitive and non-shareable. The linux ACPI driver (acpi_rs_set_irq[]
> in rsirq.c) also assumes so.
>
> Here check 3 conditions to decide if the legacy is true or not, if it
> is true, it means the IRQ() is empty or defines IRQNoFlags and need to
> call irq_override().
>
> Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
> BugLink: http://bugs.launchpad.net/bugs/1909814
> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Reported-and-tested-by: Manuel Krause <manuelkrause@xxxxxxxxxxxx>
> Signed-off-by: Hui Wang <hui.wang@xxxxxxxxxxxxx>
> ---
>  drivers/acpi/resource.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index ee78a210c606..5e4341ca6790 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -447,6 +447,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
>  {
>         struct acpi_resource_irq *irq;
>         struct acpi_resource_extended_irq *ext_irq;
> +       bool irq_legacy;
>
>         switch (ares->type) {
>         case ACPI_RESOURCE_TYPE_IRQ:
> @@ -459,9 +460,13 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
>                         irqresource_disabled(res, 0);
>                         return false;
>                 }
> +
> +               irq_legacy = (irq->triggering == ACPI_EDGE_SENSITIVE && irq->polarity ==
> +                             ACPI_ACTIVE_HIGH && irq->shareable == ACPI_EXCLUSIVE);

Now it would make sense to use a wrapper function for this:

static bool irq_is_legacy(struct acpi_resource_irq *irq)
{
        return irq->triggering == ACPI_EDGE_SENSITIVE &&
                irq->polarity == ACPI_ACTIVE_HIGH &&
                irq->shareable == ACPI_EXCLUSIVE;
}

> +
>                 acpi_dev_get_irqresource(res, irq->interrupts[index],
>                                          irq->triggering, irq->polarity,
> -                                        irq->shareable, true);
> +                                        irq->shareable, irq_legacy);

+                                        irq->shareable, irq_is_legacy(irq));

>                 break;
>         case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
>                 ext_irq = &ares->data.extended_irq;
> --



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux