Some additional information is required for updating PCH FIVR values
upon WiFi channel changes.
New attributes added to the existing sysfs:
fivr_switching_freq_mhz : Get the FIVR switching control frequency.
Uses ACPI method GFCS
fivr_switching_fault_status: Read the FIVR switching frequency control
fault status. Uses ACPI method GFFS
ssc_clock_info : Presents SSC (spread spectrum clock) information for EMI
(Electro magnetic interference) control. Use ACPI method GEMI. Refer
to the description of GEMI method below.
GFFS
This ACPI method is used to read the FIVR switching frequency control
fault status.
Bits Description
[0:0] Fault status when set to 1
[31:1] Reserved
GFCS
This ACPI method is used to read the FIVR switching control
frequency.
Bits Description
[11:0] Actual Frequency = value * XTAL_FREQ / 128
[31:12] Reserved
GEMI
This ACPI method is used to read the programmed register value for EMI
(Electro magnetic interference) control.
Bits Description
[7:0] Sets clock spectrum spread percentage:
0x00=0.2% , 0x3F=10%
1 LSB = 0.1% increase in spread (for
settings 0x01 thru 0x1C)
1 LSB = 0.2% increase in spread (for
settings 0x1E thru 0x3F)
[8] When set to 1, enables spread
spectrum clock
[9] 0: Triangle mode. FFC frequency
walks around the Fcenter in a linear
fashion
1: Random walk mode. FFC frequency
changes randomly within the SSC
(Spread spectrum clock) range
[10] 0: No white noise. 1: Add white noise
to spread waveform
[11] When 1, future writes are ignored.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-platform-dptf | 40 +++++++++++++++++++
drivers/acpi/dptf/dptf_pch_fivr.c | 9 +++++
2 files changed, 49 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
index 141834342a4d..f0c43711ad4f 100644
--- a/Documentation/ABI/testing/sysfs-platform-dptf
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -111,3 +111,43 @@ Contact: linux-acpi@xxxxxxxxxxxxxxx
Description:
(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
when FIVR clock is 38.4MHz.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
+Date: June, 2021
+KernelVersion: v5.14
+Contact: linux-acpi@xxxxxxxxxxxxxxx
+Description:
+ (RO) Get the FIVR switching control frequency in MHz.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
+Date: June, 2021
+KernelVersion: v5.14
+Contact: linux-acpi@xxxxxxxxxxxxxxx
+Description:
+ (RO) Read the FIVR switching frequency control fault status.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
+Date: June, 2021
+KernelVersion: v5.14
+Contact: linux-acpi@xxxxxxxxxxxxxxx
+Description:
+ (RO) Presents SSC (spread spectrum clock) information for EMI
+ (Electro magnetic interference) control. This is a bit mask.
+ Bits Description
+ [7:0] Sets clock spectrum spread percentage:
+ 0x00=0.2% , 0x3F=10%
+ 1 LSB = 0.1% increase in spread (for
+ settings 0x01 thru 0x1C)
+ 1 LSB = 0.2% increase in spread (for
+ settings 0x1E thru 0x3F)
+ [8] When set to 1, enables spread
+ spectrum clock
+ [9] 0: Triangle mode. FFC frequency
+ walks around the Fcenter in a linear
+ fashion
+ 1: Random walk mode. FFC frequency
+ changes randomly within the SSC
+ (Spread spectrum clock) range
+ [10] 0: No white noise. 1: Add white noise
+ to spread waveform
+ [11] When 1, future writes are ignored.
diff --git a/drivers/acpi/dptf/dptf_pch_fivr.c b/drivers/acpi/dptf/dptf_pch_fivr.c
index 5fca18296bf6..22c4ae0401ef 100644
--- a/drivers/acpi/dptf/dptf_pch_fivr.c
+++ b/drivers/acpi/dptf/dptf_pch_fivr.c
@@ -55,15 +55,24 @@ static ssize_t name##_store(struct device *dev,\
PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
+PCH_FIVR_SHOW(ssc_clock_info, GEMI)
+PCH_FIVR_SHOW(fivr_switching_freq_mhz, GFCS)
+PCH_FIVR_SHOW(fivr_switching_fault_status, GFFS)
PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
static DEVICE_ATTR_RW(freq_mhz_low_clock);
static DEVICE_ATTR_RW(freq_mhz_high_clock);
+static DEVICE_ATTR_RO(ssc_clock_info);
+static DEVICE_ATTR_RO(fivr_switching_freq_mhz);
+static DEVICE_ATTR_RO(fivr_switching_fault_status);
static struct attribute *fivr_attrs[] = {
&dev_attr_freq_mhz_low_clock.attr,
&dev_attr_freq_mhz_high_clock.attr,
+ &dev_attr_ssc_clock_info.attr,
+ &dev_attr_fivr_switching_freq_mhz.attr,
+ &dev_attr_fivr_switching_fault_status.attr,
NULL
};
--
2.27.0
