Re: [patch] hibernation: utilize ACPI hardware signature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday, 11 of January 2008, Shaohua Li wrote:
> 
> On Fri, 2008-01-11 at 07:39 +0800, Rafael J. Wysocki wrote:
> > On Monday, 7 of January 2008, Shaohua Li wrote:
> > >
> > > On Sat, 2008-01-05 at 04:44 +0800, Rafael J. Wysocki wrote:
> > > > On Friday, 4 of January 2008, Shaohua Li wrote:
> > > > >
> > > > > On Fri, 2008-01-04 at 01:04 +0800, Rafael J. Wysocki wrote:
> > > > > > On Thursday, 3 of January 2008, Shaohua Li wrote:
> > > > > > >
> > > > > > > On Wed, 2008-01-02 at 22:05 +0800, Rafael J. Wysocki wrote:
> > > > > > > > On Wednesday, 2 of January 2008, Shaohua Li wrote:
> > > > > > > > > ACPI defines a hardware signature. BIOS calculates the
> > > > signature
> > > > > > > > > according to hardware configure, if hardware changes,
> > the
> > > > > > signature
> > > > > > > > will
> > > > > > > > > change, in this case, S4 resume should fail.
> > > > > > > >
> > > > > > > > The idea is fine, but I'd prefer to do that in a more
> > > > > > straightforward
> > > > > > > > way.
> > > > > > > > Namely, we can just:
> > > > > > > > * write the signature into a variable in, for example,
> > > > > > > >   acpi_hibernation_prepare() (then, the "old" signature
> > value
> > > > will
> > > > > > be
> > > > > > > >   automatically saved in the image)
> > > > > > > > * compare it with a the "new" value read from the BIOS in
> > > > > > > >   acpi_hibernation_leave() and panic if there's a mismatch
> > > > > > > > * add a configuration option to disable this behavior
> > (just in
> > > > > > case)
> > > > > > > > This way we can avoid modifying the entire generic
> > interface
> > > > to
> > > > > > add
> > > > > > > > the feature
> > > > > > > > specific to ACPI.
> > > > > > > it would be better we do the check in boot kernel.
> > > > > > Franky, I think we should also check in the image kernel, in
> > case
> > > > the
> > > > > > boot
> > > > > > one doesn't support ACPI as I said.
> > > > > Ok, makes sense. I changed to check the signature
> > > > in .higberation_leave
> > > >
> > > > Thanks, comments below.
> > > >
> > > > > Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> > > > > ---
> > > > >  drivers/acpi/sleep/main.c |   20 ++++++++++++++++++++
> > > > >  1 file changed, 20 insertions(+)
> > > > >
> > > > > Index: linux/drivers/acpi/sleep/main.c
> > > > >
> > ===================================================================
> > > > > --- linux.orig/drivers/acpi/sleep/main.c      2008-01-03
> > > > 13:37:08.000000000 +0800
> > > > > +++ linux/drivers/acpi/sleep/main.c   2008-01-04
> > 13:36:10.000000000
> > > > +0800
> > > > > @@ -256,6 +256,17 @@ static int acpi_hibernation_enter(void)
> > > > >       return ACPI_SUCCESS(status) ? 0 : -EFAULT;
> > > > >  }
> > > > >
> > > > > +static unsigned long s4_hardware_signature;
> > > > > +static struct acpi_table_facs *facs;
> > > > > +static int nosigcheck;
> > > >
> > > > Use bool perhaps?
> > > >
> > > > > +
> > > > > +static int __init acpi_s4_nosigcheck(char *str)
> > > > > +{
> > > > > +     nosigcheck = 1;
> > > >
> > > > And "true" here?
> > > >
> > > > > +     return 1;
> > > > > +}
> > > > > +__setup("acpi_s4_nosigcheck", acpi_s4_nosigcheck);
> > > > > +
> > > >
> > > > Please put this function at the end of the file.  Also, I'd call
> > it
> > > > "acpi_s4_nosig", but whatever.
> > > Fixed all except this one, the routine is defined with HIBERATION
> > > configed.
> > 
> > I've just realized that we're not doing the right thing here ...
> > 
> > > Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> > > ---
> > >  drivers/acpi/sleep/main.c |   22 ++++++++++++++++++++++
> > >  1 file changed, 22 insertions(+)
> > >
> > > Index: linux/drivers/acpi/sleep/main.c
> > > ===================================================================
> > > --- linux.orig/drivers/acpi/sleep/main.c      2008-01-04
> > 13:44:40.000000000 +0800
> > > +++ linux/drivers/acpi/sleep/main.c   2008-01-07 09:31:42.000000000
> > +0800
> > > @@ -256,6 +256,17 @@ static int acpi_hibernation_enter(void)
> > >       return ACPI_SUCCESS(status) ? 0 : -EFAULT;
> > >  }
> > > 
> > > +static unsigned long s4_hardware_signature;
> > > +static struct acpi_table_facs *facs;
> > > +static bool nosigcheck;
> > > +
> > > +static int __init acpi_s4_nosigcheck(char *str)
> > > +{
> > > +     nosigcheck = true;
> > > +     return 1;
> > > +}
> > > +__setup("acpi_s4_nosigcheck", acpi_s4_nosigcheck);
> > > +
> > >  static void acpi_hibernation_leave(void)
> > >  {
> > >       /*
> > > @@ -263,6 +274,10 @@ static void acpi_hibernation_leave(void)
> > >        * enable it here.
> > >        */
> > >       acpi_enable();
> > > +     if (facs && s4_hardware_signature != facs->hardware_signature)
> > {
> > 
> > ... because we should read the signature from the hardware here, while
> > we're
> > comparing two values read from memory.  They will always be equal. :-)
> No, facs isn't a copy of ACPI FACS table (imagine how we sets
> facs->waking_vector). It's mapped to BIOS table.

Ah, ok.  Thanks for the clarification.

I'll rebase your patch on top of the suspend branch.

Greetings,
Rafael
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux