(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 9 Jan 2008 13:05:34 -0800 (PST) bugme-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=9721 > > Summary: wake on lan fails with sky2 module > Product: ACPI > Version: 2.5 > KernelVersion: 2.6.24-rc7 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: Power-Sleep-Wake > AssignedTo: acpi_power-sleep-wake@xxxxxxxxxxxxxxxxxxxx > ReportedBy: supersud501@xxxxxxxx This post-2.6.23 regression was assigned to ACPI but is quite possibly a net driver problem? > > Latest working kernel version: 2.6.23.12 > Earliest failing kernel version: 2.6.24-rc6 (not tested earlier kernel, > 2.6.24-rc7 still failing) > Distribution: Ubuntu 8.04 (but Kernel build from Kernel.org and system modifiet > to make wake on lan work, i.e. network cards are not shutted down on poweroff) > Hardware Environment: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit > Ethernet Controller (rev 20) onboard Asus P5W DH motherboard, uses module SKY2 > Software Environment: > Problem Description: > > When enabling wake on lan with: 'ethtool -s eth0 wol' i get the following > status: > > 21:56:29 ~ # sudo ethtool eth0 > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pg > Wake-on: g <---- wol enabled > Current message level: 0x000000ff (255) > Link detected: yes > > but after shutting down the pc doesn't wake up when magic packet is sent. > > the status lights of the network card are still on (so the card seems to be > online). > > same system with only changed kernel to 2.6.23.12 and same procedure like > above: wake on lan works. > > Steps to reproduce: enable wol on your network card using SKY2 module and it > doesn't work too? > > if you need more information, just tell me, it's my first bug report. > regards > > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
