On Mon, Mar 29, 2021 at 5:47 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> Commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with
> _DEP lists") dropped the following 2 lines from acpi_init_device_object():
>
> /* Assume there are unmet deps until acpi_device_dep_initialize() runs */
> device->dep_unmet = 1;
>
> Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This
> causes the acpi_bus_get_status() call in acpi_add_single_object() to
> actually call _STA, even though there maybe unmet deps, leading to errors
> like these:
>
> [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
> [GenericSerialBus] (20170831/evregion-166)
> [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
> (20170831/exfldio-299)
> [ 0.123618] ACPI Error: Method parse/execution failed
> \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
>
> Fix this by re-adding the dep_unmet = 1 initialization to
> acpi_init_device_object() and modifying acpi_bus_check_add() to make sure
> that dep_unmet always gets setup there, overriding the initial 1 value.
>
> This re-fixes the issue initially fixed by
> commit 63347db0affa ("ACPI / scan: Use acpi_bus_get_status() to initialize
> ACPI_TYPE_DEVICE devs"), which introduced the removed
> "device->dep_unmet = 1;" statement.
>
> This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055.
>
> Fixes: 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists")
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Applied as 5.12-rc material, thanks!
