# dmidecode 2.9
SMBIOS 2.4 present.
40 structures occupying 1569 bytes.
Table at 0x000E73D0.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Apple Computer, Inc.
Version: MBP11.88Z.0055.B08.0610121325
Release Date: 10/12/06
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
ACPI is supported
IEEE 1394 boot is supported
Smart battery is supported
Function key-initiated network boot is supported
BIOS Revision: 0.1
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Apple Computer, Inc.
Product Name: MacBookPro1,1
Version: 1.0
Serial Number: W86151LUVJ3
UUID: 9CFE245E-D0C8-BD45-A79F-54EA5FBD3D97
Wake-up Type: Power Switch
SKU Number: System SKUNumber
Family: Napa Mac
Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Apple Computer, Inc.
Product Name: Mac-F425BEC8
Version: PVT
Serial Number: 1
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Part Component
Chassis Handle: 0x0003
Type: Unknown
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Apple Computer, Inc.
Type: Portable
Lock: Not Present
Version: Mac-F425BEC8
Serial Number: W86151LUVJ3
Asset Tag: Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Other
Security Status: Other
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0
Handle 0x0004, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0005, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
<BAD INDEX>
Currently Installed Language: Not Specified
Handle 0x0106, DMI type 12, 5 bytes
System Configuration Options
Handle 0x0107, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: DVI
External Connector Type: Other
Port Type: Video Port
Handle 0x0108, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: USBB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0109, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: USBA
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x010A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: 1394A
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x010B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: Audio Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x010C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: Microphone
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x010D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: RJ-45
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x010E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: PCI-Express Mini Card
External Connector Type: Other
Port Type: Other
Handle 0x010F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: None
Internal Connector Type: None
External Reference Designator: Digital Battery
External Connector Type: Other
Port Type: Other
Handle 0x0110, DMI type 9, 13 bytes
System Slot Information
Designation: Airport
Type: x1 PCI Express
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Hot-plug devices are supported
SMBus signal is supported
Handle 0x0111, DMI type 9, 13 bytes
System Slot Information
Designation: ExpressCard
Type: x1 PCI Express
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Hot-plug devices are supported
SMBus signal is supported
Handle 0x0112, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: ATI M56 Video
Handle 0x0113, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Azalia Audio Codec
Handle 0x0114, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Yukon Ethernet Controller
Handle 0x0115, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: Sata
Handle 0x0116, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: Pata
Handle 0x0117, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: Sudden Motion Sensor
Handle 0x0118, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 18 01 00 00
Handle 0x0119, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Unknown
Manufacturer: Intel(R) Corporation
ID: E8 06 00 00 FF FB E9 BF
Version: Genuine Intel(R) CPU T
Voltage: 1.6 V
External Clock: 166 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x011C
L2 Cache Handle: 0x011A
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Unknown
Part Number: Not Specified
Handle 0x011A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x011B, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 8-way Set-associative
Handle 0x011C, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x011D, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Unknown
Manufacturer: Intel(R) Corporation
ID: E8 06 00 00 FF FB E9 BF
Version: Genuine Intel(R) CPU T
Voltage: 1.6 V
External Clock: 166 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0120
L2 Cache Handle: 0x011E
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Unknown
Part Number: Not Specified
Handle 0x011E, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x011F, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 8-way Set-associative
Handle 0x0120, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0121, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0122, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0121
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 0x2CFFFFFFFFFFFFFF
Serial Number: 0xD304AEA3
Asset Tag: Unknown
Part Number: 0x3136485446313238363448592D3636374233
Handle 0x0123, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0122
Memory Array Mapped Address Handle: 0x0126
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x0124, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0121
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 0x7C00000000000000
Serial Number: 0x00000000
Asset Tag: Unknown
Part Number: 0x000000000000000000000000000000000000
Handle 0x0125, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0124
Memory Array Mapped Address Handle: 0x0126
Partition Row Position: 2
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x0126, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0121
Partition Width: 0
Handle 0xFFFD, DMI type 127, 4 bytes
End Of Table
Inspecting /boot/System.map-2.6.22.13-0.3-default
Loaded 26157 symbols from /boot/System.map-2.6.22.13-0.3-default.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.13-0.3-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007f0bd000 (usable)
<4> BIOS-e820: 000000007f0bd000 - 000000007f2be000 (ACPI NVS)
<4> BIOS-e820: 000000007f2be000 - 000000007feb9000 (ACPI data)
<4> BIOS-e820: 000000007feb9000 - 000000007feef000 (ACPI NVS)
<4> BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
<4> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
<4> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
<5>1136MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>Entering add_active_range(0, 0, 520381) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
<4> HighMem 229376 -> 520381
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 520381
<7>On node 0 totalpages: 520381
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4064 pages, LIFO batch:0
<7> Normal zone: 1760 pages used for memmap
<7> Normal zone: 223520 pages, LIFO batch:31
<7> HighMem zone: 2273 pages used for memmap
<7> HighMem zone: 288732 pages, LIFO batch:31
<6>DMI 2.4 present.
<6>Using APIC driver default
<4>ACPI: RSDP 000FE020, 0024 (r2 APPLE )
<4>ACPI: XSDT 7FEFD120, 0074 (r1 APPLE Apple00 55 1000013)
<4>ACPI: FACP 7FEFB000, 00F4 (r3 APPLE Apple00 55 Loki 5F)
<4>ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE MacBookP 10001 INTL 20050309)
<4>ACPI: FACS 7FEBB000, 0040
<4>ACPI: HPET 7FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
<4>ACPI: APIC 7FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
<4>ACPI: MCFG 7FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
<4>ACPI: ASF! 7FEF7000, 009C (r32 APPLE Apple00 1 Loki 5F)
<4>ACPI: SBST 7FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
<4>ACPI: ECDT 7FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
<4>ACPI: SSDT 7FEB6000, 064F (r1 APPLE SataPri 1000 INTL 20050309)
<4>ACPI: SSDT 7FEB5000, 069C (r1 APPLE SataSec 1000 INTL 20050309)
<4>ACPI: SSDT 7FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
<6>ACPI: PM-Timer IO Port: 0x408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 6:14 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<4>Processor #1 6:14 APIC version 20
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
<4>Built 1 zonelists. Total pages: 516316
<5>Kernel command line: root=/dev/sda4 resume=/dev/sda3 splash=silent showopts acpi_osi=!Linux
<6>bootsplash: silent mode.
<6>ACPI: Disabled _OSI(Linux)
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 1997.569 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2055760k/2081524k available (1825k kernel code, 24564k reserved, 765k data, 228k init, 1164020k highmem)
<4>virtual kernel memory layout:
<4> fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
<4> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<4> .init : 0xc038e000 - 0xc03c7000 ( 228 kB)
<4> .data : 0xc02c844b - 0xc0387964 ( 765 kB)
<4> .text : 0xc0100000 - 0xc02c844b (1825 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 64-bit timers, 14318180 Hz
<4>Calibrating delay using timer specific routine.. 3998.99 BogoMIPS (lpj=7997980)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<7>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 3946k freed
<6>ACPI: Core revision 20070126
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 694 Objects with 80 Devices 157 Methods 29 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0003) - 11 Objects with 3 Devices 5 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions
<4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<4>CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
<6>SMP alternatives: switching to SMP code
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 3994.69 BogoMIPS (lpj=7989390)
<7>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
<4>monitor/mwait feature present.
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<7>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<4>CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
<6>Total of 2 processors activated (7993.68 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>Brought up 2 CPUs
<4>migration_cost=39
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG
<4>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 6 Runtime GPEs in this block
<6>ACPI: EC: EC description table is found, configuring boot EC
<4>
<4>Completing Region/Field/Buffer/Package initialization:..........................................................
<4>Initialized 27/29 Regions 0/0 Fields 22/22 Buffers 9/19 Packages (737 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
<4>ACPI: Please test with "acpi_osi=!Linux"
<4>Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx
<4>..
<4>Executed 2 _INI methods requiring 0 _STA executions (examined 90 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<4>PCI quirk: region 0500-053f claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 10 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>ACPI: RTC can wake from S4
<6>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
<6>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
<6>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
<6>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
<6>pnp: 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
<6>Time: tsc clocksource has been installed.
<6>Switched to NOHz mode on CPU #0
<6>Switched to NOHz mode on CPU #1
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: 3000-3fff
<6> MEM window: 98300000-983fffff
<6> PREFETCH window: 80000000-8fffffff
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: 2000-2fff
<6> MEM window: 98200000-982fffff
<6> PREFETCH window: 98500000-985fffff
<6>PCI: Bridge: 0000:00:1c.1
<6> IO window: disabled.
<6> MEM window: 98100000-981fffff
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.2
<6> IO window: 1000-1fff
<6> MEM window: 94100000-980fffff
<6> PREFETCH window: 90000000-93ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: disabled.
<6> MEM window: 94000000-940fffff
<6> PREFETCH window: disabled.
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>audit(1199581144.676:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:01:00.0
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0:pcie00]
<7>Allocate Port Service[0000:00:01.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
<7>Allocate Port Service[0000:00:1c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
<7>Allocate Port Service[0000:00:1c.1:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.2:pcie00]
<7>Allocate Port Service[0000:00:1c.2:pcie02]
<7>Allocate Port Service[0000:00:1c.2:pcie03]
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>floppy0: no floppy controllers found
<6>PNP: No PS/2 controller found. Probing ports directly.
<3>i8042.c: No controller found.
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>Freeing unused kernel memory: 228k freed
<4>ACPI: SSDT 7FEB3C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0021) - 5 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT 7FEB3910, 02C3 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0022) - 1 Objects with 0 Devices 1 Methods 0 Regions
<7>Monitor-Mwait will be used to enter C-1 state
<7>Monitor-Mwait will be used to enter C-2 state
<7>Monitor-Mwait will be used to enter C-3 state
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI: SSDT 7FEB3F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0027) - 3 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT 7FEB2F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0028) - 1 Objects with 0 Devices 1 Methods 0 Regions
<6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<4>Marking TSC unstable due to: possible TSC halt in C2.
<5>SCSI subsystem initialized
<6>Time: hpet clocksource has been installed.
<7>libata version 3.00 loaded.
<7>ata_piix 0000:00:1f.1: version 2.11
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15
<4>Clocksource tsc unstable (delta = -250934555 ns)
<6>ata1.00: ATAPI: MATSHITADVD-R UJ-857, HAEA, max UDMA/66
<6>ata1.00: configured for UDMA/66
<5>scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857 HAEA PQ: 0 ANSI: 5
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
<4>PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
<6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi2 : ata_piix
<6>scsi3 : ata_piix
<6>ata3: SATA max UDMA/133 cmd 0x000140d8 ctl 0x000140f6 bmdma 0x00014020 irq 19
<6>ata4: SATA max UDMA/133 cmd 0x000140d0 ctl 0x000140f2 bmdma 0x00014028 irq 19
<6>ata3.01: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
<6>ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>ata3.01: configured for UDMA/133
<5>scsi 2:0:1:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<5>sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
<5>sd 2:0:1:0: [sda] Write Protect is off
<7>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
<5>sd 2:0:1:0: [sda] Write Protect is off
<7>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda:<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.2
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.3
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 1-2: new full speed USB device using uhci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98405400
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.22.13-0.3-default ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.7
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<4> sda1 sda2 sda3 sda4
<5>sd 2:0:1:0: [sda] Attached SCSI disk
<3>usb 1-2: device not accepting address 2, error -71
<4>swsusp: Basic memory bitmaps created
<4>swsusp: Basic memory bitmaps freed
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda4, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>usb 5-4: new high speed USB device using ehci_hcd and address 3
<6>usb 5-4: new device found, idVendor=05ac, idProduct=8501
<6>usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 5-4: Product: Built-in iSight
<6>usb 5-4: Manufacturer: Micron
<6>usb 5-4: configuration #1 chosen from 1 choice
<6>usb 1-2: new full speed USB device using uhci_hcd and address 4
<6>usb 1-2: new device found, idVendor=05ac, idProduct=0218
<6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-2: Product: Apple Internal Keyboard / Trackpad
<6>usb 1-2: Manufacturer: Apple Computer
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>usb 3-2: new full speed USB device using uhci_hcd and address 2
<6>usb 3-2: new device found, idVendor=05ac, idProduct=8240
<6>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 3-2: Product: IR Receiver
<6>usb 3-2: Manufacturer: Apple Computer, Inc.
<6>usb 3-2: configuration #1 chosen from 1 choice
<6>usb 4-1: new full speed USB device using uhci_hcd and address 2
<5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
<5>sd 2:0:1:0: Attached scsi generic sg1 type 0
<6>usb 4-1: new device found, idVendor=05ac, idProduct=1000
<6>usb 4-1: new device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 4-1: configuration #1 chosen from 1 choice
<6>input: Apple Mac mini infrared remote control driver as /class/input/input1
<6>usbcore: registered new interface driver appleir
<6>/usr/src/packages/BUILD/obj/default/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
<6>ACPI: AC Adapter [ADP1] (on-line)
<6>input: Power Button (FF) as /class/input/input2
<6>ACPI: Power Button (FF) [PWRF]
<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>input: Lid Switch as /class/input/input3
<6>ACPI: Lid Switch [LID0]
<6>input: Power Button (CM) as /class/input/input4
<6>ACPI: Power Button (CM) [PWRB]
<6>input: Sleep Button (CM) as /class/input/input5
<6>ACPI: Sleep Button (CM) [SLPB]
<6>usbcore: registered new interface driver hiddev
<6>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
<6>input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
<6>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
<6>input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
<6>input: HID 05ac:1000 as /class/input/input8
<6>input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
<4>appletouch Geyser 3 inited.
<6>input: appletouch as /class/input/input9
<6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:02:00.0 to 64
<6>sky2 0000:02:00.0: v1.14 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
<6>sky2 eth0: addr 00:16:cb:92:b8:be
<6>input: HID 05ac:1000 as /class/input/input10
<6>input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>usbcore: registered new interface driver appletouch
<6>Linux video capture interface: v2.00
<4>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
<6>[fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
<6>[fglrx] ASYNCIO init succeed!
<6>[fglrx] PAT is enabled successfully!
<6>[fglrx] module loaded - fglrx 8.44.3 [Dec 19 2007] on minor 0
<6>iTCO_vendor_support: vendor-support=0
<6>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
<6>wlan: 0.8.4.2 (0.9.3.3)
<6>ath_pci: 0.9.4.5 (0.9.3.3)
<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:03:00.0 to 64
<6>ath_rate_sample: 1.2 (0.9.3.3)
<4>wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
<4>wifi0: mac 10.3 phy 6.1 radio 10.2
<4>wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>wifi0: Use hw queue 8 for CAB traffic
<4>wifi0: Use hw queue 9 for beacons
<6>rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
<4>rtc_cmos: probe of 00:09 failed with error -16
<7>uvcvideo: iSight: firmware already loaded.
<6>uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
<3>uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
<6>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<3>intel_rng: FWH not detected
<4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:0:0: Attached scsi CD-ROM sr0
<6>wifi0: Atheros 5424/2424: mem=0x98100000, irq=17
<6>ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[94000000-940007ff] Max Packet=[2048] IR/IT contexts=[8/8]
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
<6>hda_codec: STAC922x, Apple subsys_id=106b0200
<7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0xc/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2337: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2341: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2349: inputs: mic=0xb, fmic=0x0, line=0xf, fline=0x0, cd=0x0, aux=0x0
<7>ALSA sound/pci/hda/patch_sigmatel.c:1304: dac_nids=3 (0x3/0x5/0x4/0x0/0x0)
<6>Adding 2109836k swap on /dev/sda3. Priority:-1 extents:1 across:2109836k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
<6>loop: module loaded
<4>hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016cbfffe6420a6]
<6>AppArmor: AppArmor initialized
<5>audit(1199581156.700:2): type=1505 info="AppArmor initialized" pid=2136
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun Jan 6 00:59:08 2008
Creating device nodes with udev
Trying manual resume from /dev/sda3
Invoking userspace resume from /dev/sda3
boot/82-resume.userspace.sh: line 48: /proc/splash: No such file or directory
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.4
Trying manual resume from /dev/sda3
Invoking in-kernel resume from /dev/sda3
Waiting for device /dev/sda4 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda4
SuSE (/dev/sda4): clean, 131483/1224000 files, 874403/2446529 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda4
Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Jan 6 01:59:12 2008
done
Starting udevd udevd-event[1880]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda4 is already mounted on /
Activating device mapper...
done
Checking file systems...
fsck 1.40.2 (12-Jul-2007)
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda2 on /media/OSX type hfsplus (ro)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Mounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles <notice>killproc: kill(1138,29)
Creating /var/log/boot.msg
donedone
Configuring serial ports...
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'elmar'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1138,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Sun Jan 6 01:59:21 2008
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice> ], [startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog services.done
Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
done
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/acpid ]
Starting acpid done
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
Starting ConsoleKitdone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modulesdone
<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
Starting the DHCP DBUS Daemondone
Starting the NetworkManagerDispatcherdone
Starting the NetworkManagerdone
<notice>startproc: execve (/usr/sbin/gpm) [ /usr/sbin/gpm -m /dev/input/mice -t imps2 -Rraw ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/gpm ]
Starting console mouse support (gpm)done
Loading keymap mac/all/mac-us.map.gz
doneLoading compose table latin1.add<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
Starting irqbalance done
Starting auditd done
done
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneChecking/updating CPU microcode done
Starting Avahi daemon.done
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Starting atieventsddone
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
Starting Avahi DNS Configuration daemondone
Starting hotkey-setup done
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Starting network time protocol daemon (NTPD)done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)Initializing random number generatordone
done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda4 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting smartd done
Starting CRON daemondone
Starting powersaved: Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: splash
<notice>killproc: kill(2328,3)
