Re: [lm-sensors] 2.6.24-rc4 hwmon it87 probe fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday December 19 2007 07:45:14 pm Carlos Corbacho wrote:
> On Thursday 20 December 2007 00:20:21 Bjorn Helgaas wrote:
> > I suspect the manufacturers would say "Oh, the sensors?  The BIOS
> > isn't broken, you're just supposed to use WMI or some (undocumented)
> > ACPI device to get at those."
>
> It's quite possible - can we have DSDTs for the boards in question so we
> can quickly check if this is a possibility? (Basically, to see if they have
> PNP0C14 devices - if they don't, then I'm afraid it's nothing to do with
> WMI).
>
> -Carlos

Hi Carlos,

I've attached the DSDT for Gigabyte GA-965G-DS3 (rev 1.0, bios rev. F9) to 
bugzilla entry #9514:

http://bugzilla.kernel.org/attachment.cgi?id=14132

Thanks,
-- 
                Elvis
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux