Hello, I saw this in my dmesg and tried it: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
And software (RAM) suspend seems to work a bit better. I'll test it some more and let you know. At least, nothing overtly bad has happened since I set acpi_apic_instance=2.
The machine is a Sony Vaio SZ650N, and I'm keen to get everything going on it so let me know if I can help in any way.
Major problem at the moment is that screen brightness control does not work. Cheers Mike
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=ebb0a92b-3d24-4178-9275-b99817c75602 ro quiet splash acpi_apic_instance=2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable) [ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6cb000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] ACPI: Shall use APIC/MADT table 2 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521904) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76D0 checksum 0 [ 0.000000] ACPI: RSDP 000F76D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6BEDBC, 0094 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: FACP 7F6C7BD2, 00F4 (r3 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: DSDT 7F6C041A, 7744 (r2 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: FACS 7F6CAFC0, 0040 [ 0.000000] ACPI: APIC 7F6C7CC6, 0068 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: HPET 7F6C7D2E, 0038 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: MCFG 7F6C7D66, 003C (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: TCPA 7F6C7DA2, 0032 (r1 Sony VAIO 20070905 PTL 5A52) [ 0.000000] ACPI: TMOR 7F6C7DD4, 0026 (r1 Sony VAIO 20070905 PTL 3) [ 0.000000] ACPI: SLIC 7F6C7DFA, 0176 (r1 Sony VAIO 20070905 PTL 1000000) [ 0.000000] ACPI: APIC 7F6C7F70, 0068 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: BOOT 7F6C7FD8, 0028 (r1 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: SSDT 7F6C013D, 02DD (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6C001B, 0122 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BF3DC, 025F (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BF336, 00A6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BEE50, 04E6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 2 [ 0.000000] ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi@xxxxxxxxxxxxxxx [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f6b0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521904) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f6b0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 521904 [ 0.000000] On node 0 totalpages: 521807 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7079 pages used for memmap [ 0.000000] DMA32 zone: 510729 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 513547 [ 0.000000] Kernel command line: root=UUID=ebb0a92b-3d24-4178-9275-b99817c75602 ro quiet splash acpi_apic_instance=2 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 17.044341] time.c: Detected 2194.504 MHz processor. [ 17.045682] Console: colour VGA+ 80x25 [ 17.045699] Checking aperture... [ 17.045711] Calgary: detecting Calgary via BIOS EBDA area [ 17.045713] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 17.064634] Memory: 2046252k/2087616k available (2274k kernel code, 40976k reserved, 1181k data, 296k init) [ 17.064674] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 17.142638] Calibrating delay using timer specific routine.. 4393.42 BogoMIPS (lpj=8786843) [ 17.142667] Security Framework v1.0.0 initialized [ 17.142673] SELinux: Disabled at boot. [ 17.142829] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.144035] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.144615] Mount-cache hash table entries: 256 [ 17.144736] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.144739] CPU: L2 cache: 4096K [ 17.144742] CPU 0/0 -> Node 0 [ 17.144743] using mwait in idle threads. [ 17.144745] CPU: Physical Processor ID: 0 [ 17.144746] CPU: Processor Core ID: 0 [ 17.144752] CPU0: Thermal monitoring enabled (TM2) [ 17.144760] SMP alternatives: switching to UP code [ 17.144996] Early unpacking initramfs... done [ 17.438502] ACPI: Core revision 20070126 [ 17.438547] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.489408] Using local APIC timer interrupts. [ 17.534919] result 12468771 [ 17.534920] Detected 12.468 MHz APIC timer. [ 17.538152] SMP alternatives: switching to SMP code [ 17.538232] Booting processor 1/2 APIC 0x1 [ 17.548701] Initializing CPU#1 [ 17.625990] Calibrating delay using timer specific routine.. 4389.07 BogoMIPS (lpj=8778148) [ 17.625997] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.625999] CPU: L2 cache: 4096K [ 17.626001] CPU 1/1 -> Node 0 [ 17.626002] CPU: Physical Processor ID: 0 [ 17.626003] CPU: Processor Core ID: 1 [ 17.626008] CPU1: Thermal monitoring enabled (TM2) [ 17.626459] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 17.629999] Brought up 2 CPUs [ 17.716542] migration_cost=16 [ 17.716694] NET: Registered protocol family 16 [ 17.716762] ACPI: bus type pci registered [ 17.716768] PCI: Using configuration type 1 [ 17.717799] ACPI: EC: Look up EC in DSDT [ 17.718362] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 17.719525] ACPI: System BIOS is requesting _OSI(Linux) [ 17.719527] ACPI: Please test with "acpi_osi=!Linux" [ 17.719528] Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx [ 17.721696] ACPI: Interpreter enabled [ 17.721699] ACPI: (supports S0 S3 S4 S5) [ 17.721713] ACPI: Using IOAPIC for interrupt routing [ 17.737118] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 17.737151] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.737161] PCI: Probing PCI hardware (bus 00) [ 17.739696] PCI: Transparent bridge - 0000:00:1e.0 [ 17.739851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.740194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 17.740320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 17.740435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 17.740553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 17.740685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 17.747749] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.747840] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.747930] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.748020] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.748110] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.748200] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.748290] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 17.748383] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 17.748476] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.748484] pnp: PnP ACPI init [ 17.748492] ACPI: bus type pnp registered [ 17.756798] pnp: PnP ACPI: found 12 devices [ 17.756800] ACPI: ACPI bus type pnp unregistered [ 17.756841] PCI: Using ACPI for IRQ routing [ 17.756843] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.756992] NET: Registered protocol family 8 [ 17.756994] NET: Registered protocol family 20 [ 17.757007] PCI-GART: No AMD northbridge found. [ 17.757012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 17.757016] hpet0: 3 64-bit timers, 14318180 Hz [ 17.758074] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 17.758077] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 17.758079] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 17.758082] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 17.758325] PCI: Bridge: 0000:00:1c.0 [ 17.758328] IO window: 2000-2fff [ 17.758334] MEM window: f6000000-f7ffffff [ 17.758339] PREFETCH window: f0000000-f1ffffff [ 17.758345] PCI: Bridge: 0000:00:1c.1 [ 17.758348] IO window: 3000-3fff [ 17.758354] MEM window: f8000000-f9ffffff [ 17.758359] PREFETCH window: f2000000-f3ffffff [ 17.758366] PCI: Bridge: 0000:00:1c.2 [ 17.758369] IO window: 4000-4fff [ 17.758375] MEM window: fa000000-fbffffff [ 17.758379] PREFETCH window: f4000000-f5ffffff [ 17.758385] PCI: Bridge: 0000:00:1c.3 [ 17.758388] IO window: 5000-5fff [ 17.758394] MEM window: c8000000-c9ffffff [ 17.758399] PREFETCH window: cc000000-cdffffff [ 17.758407] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 17.758408] IO window: 00006000-000060ff [ 17.758414] IO window: 00006400-000064ff [ 17.758419] PREFETCH window: 88000000-8bffffff [ 17.758424] MEM window: 90000000-93ffffff [ 17.758429] PCI: Bridge: 0000:00:1e.0 [ 17.758432] IO window: 6000-6fff [ 17.758438] MEM window: fc200000-fc2fffff [ 17.758443] PREFETCH window: 88000000-8bffffff [ 17.758472] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.758479] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.758503] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.758509] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 17.758533] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.758538] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.758563] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 17.758568] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.758583] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.758601] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.758613] NET: Registered protocol family 2 [ 17.761811] Time: hpet clocksource has been installed. [ 17.797825] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.798381] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 17.800994] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 17.801579] TCP: Hash tables configured (established 262144 bind 65536) [ 17.801582] TCP reno registered [ 17.809890] checking if image is initramfs... it is [ 18.438372] Freeing initrd memory: 7738k freed [ 18.441794] Simple Boot Flag at 0x36 set to 0x80 [ 18.442272] audit: initializing netlink socket (disabled) [ 18.442290] audit(1196786792.356:1): initialized [ 18.443946] VFS: Disk quotas dquot_6.5.1 [ 18.443986] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.444060] io scheduler noop registered [ 18.444062] io scheduler anticipatory registered [ 18.444063] io scheduler deadline registered [ 18.444138] io scheduler cfq registered (default) [ 18.444154] Boot video device is 0000:00:02.0 [ 18.447856] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.447919] assign_interrupt_mode Found MSI capability [ 18.447922] Allocate Port Service[0000:00:1c.0:pcie00] [ 18.447951] Allocate Port Service[0000:00:1c.0:pcie02] [ 18.448050] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.448112] assign_interrupt_mode Found MSI capability [ 18.448113] Allocate Port Service[0000:00:1c.1:pcie00] [ 18.448136] Allocate Port Service[0000:00:1c.1:pcie02] [ 18.448232] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 18.448293] assign_interrupt_mode Found MSI capability [ 18.448295] Allocate Port Service[0000:00:1c.2:pcie00] [ 18.448319] Allocate Port Service[0000:00:1c.2:pcie02] [ 18.448415] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.448476] assign_interrupt_mode Found MSI capability [ 18.448478] Allocate Port Service[0000:00:1c.3:pcie00] [ 18.448502] Allocate Port Service[0000:00:1c.3:pcie02] [ 18.464947] Real Time Clock Driver v1.12ac [ 18.465465] hpet_resources: 0xfed00000 is busy [ 18.465487] Linux agpgart interface v0.102 (c) Dave Jones [ 18.465489] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.466320] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.466423] input: Macintosh mouse button emulation as /class/input/input0 [ 18.466484] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.469015] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.469018] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.469143] mice: PS/2 mouse device common for all mice [ 18.469244] TCP cubic registered [ 18.469297] NET: Registered protocol family 1 [ 18.469464] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 18.469470] Freeing unused kernel memory: 296k freed [ 18.492872] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.611938] AppArmor: AppArmor initialized<5>audit(1196786793.528:2): type=1505 info="AppArmor initialized" pid=1277 [ 19.616708] fuse init (API version 7.8) [ 19.619629] Failure registering capabilities with primary security module. [ 19.656675] ACPI: SSDT 7F6BFCD9, 027A (r1 Sony VAIO 20070905 PTL 20050624) [ 19.656863] ACPI: SSDT 7F6BF63B, 0619 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.658972] Monitor-Mwait will be used to enter C-1 state [ 19.658975] Monitor-Mwait will be used to enter C-2 state [ 19.658978] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 19.658982] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.659183] ACPI: SSDT 7F6BFF53, 00C8 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.659357] ACPI: SSDT 7F6BFC54, 0085 (r1 Sony VAIO 20070905 PTL 20050624) [ 19.661510] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 19.661513] ACPI: Processor [CPU1] (supports 8 throttling states) [ 19.669151] ACPI: Thermal Zone [ATF0] (56 C) [ 19.669860] ACPI: Thermal Zone [DTS0] (55 C) [ 19.670578] ACPI: Thermal Zone [DTS1] (57 C) [ 20.004957] usbcore: registered new interface driver usbfs [ 20.004979] usbcore: registered new interface driver hub [ 20.004998] usbcore: registered new device driver usb [ 20.005552] USB Universal Host Controller Interface driver v3.0 [ 20.005631] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 20.005642] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 20.005645] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 20.005769] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 20.005801] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 20.005888] usb usb1: configuration #1 chosen from 1 choice [ 20.005907] hub 1-0:1.0: USB hub found [ 20.005911] hub 1-0:1.0: 2 ports detected [ 20.040512] SCSI subsystem initialized [ 20.046608] libata version 2.21 loaded. [ 20.107007] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 20.107018] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 20.107021] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 20.107131] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 20.107159] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 20.107421] usb usb2: configuration #1 chosen from 1 choice [ 20.107537] hub 2-0:1.0: USB hub found [ 20.107541] hub 2-0:1.0: 2 ports detected [ 20.210851] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 20.211755] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 20.211761] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 20.211981] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 20.212016] ehci_hcd 0000:00:1a.7: debug port 1 [ 20.212023] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 20.212029] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 20.215925] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.216183] usb usb3: configuration #1 chosen from 1 choice [ 20.216297] hub 3-0:1.0: USB hub found [ 20.216302] hub 3-0:1.0: 4 ports detected [ 20.318700] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 20.318712] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 20.318715] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.318733] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 20.318764] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 20.318837] usb usb4: configuration #1 chosen from 1 choice [ 20.318856] hub 4-0:1.0: USB hub found [ 20.318860] hub 4-0:1.0: 2 ports detected [ 20.422340] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 20.422347] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 20.422350] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.422365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 20.422390] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 20.422460] usb usb5: configuration #1 chosen from 1 choice [ 20.422478] hub 5-0:1.0: USB hub found [ 20.422482] hub 5-0:1.0: 2 ports detected [ 20.526199] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 20.526206] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 20.526210] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 20.526223] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 20.526249] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 20.526323] usb usb6: configuration #1 chosen from 1 choice [ 20.526340] hub 6-0:1.0: USB hub found [ 20.526345] hub 6-0:1.0: 2 ports detected [ 20.630159] ahci 0000:00:1f.2: version 2.2 [ 20.630182] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 20.969558] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 21.104846] usb 3-2: configuration #1 chosen from 1 choice [ 21.468893] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 21.632699] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 21.632702] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 21.632708] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 21.632909] scsi0 : ahci [ 21.632942] scsi1 : ahci [ 21.632967] scsi2 : ahci [ 21.633036] ata1: SATA max UDMA/133 cmd 0xffffc20000ad6100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 21.633040] ata2: SATA max UDMA/133 cmd 0xffffc20000ad6180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 21.633044] ata3: SATA max UDMA/133 cmd 0xffffc20000ad6200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 21.646697] usb 1-1: configuration #1 chosen from 1 choice [ 22.116038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.118321] ata1.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 22.118324] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 22.119069] ata1.00: configured for UDMA/133 [ 22.427623] ata2: SATA link down (SStatus 0 SControl 300) [ 22.739208] ata3: SATA link down (SStatus 0 SControl 300) [ 22.739287] scsi 0:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 22.740027] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 22.740031] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 22.740905] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 22.740911] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 22.741348] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 22.741382] ehci_hcd 0000:00:1d.7: debug port 1 [ 22.741389] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 22.741395] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 22.745283] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.745588] usb usb7: configuration #1 chosen from 1 choice [ 22.745723] hub 7-0:1.0: USB hub found [ 22.745728] hub 7-0:1.0: 6 ports detected [ 22.790641] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 22.792036] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 22.792045] sd 0:0:0:0: [sda] Write Protect is off [ 22.792047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.792058] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.792097] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 22.792103] sd 0:0:0:0: [sda] Write Protect is off [ 22.792105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.792116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.792119] sda: sda1 sda2 sda3 [ 22.796319] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.798589] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.847234] ata_piix 0000:00:1f.1: version 2.11 [ 22.847253] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 22.847285] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 22.847336] scsi3 : ata_piix [ 22.847372] scsi4 : ata_piix [ 22.847429] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14 [ 22.847432] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15 [ 23.167090] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 23.205478] Attempting manual resume [ 23.205481] swsusp: Resume From Partition 8:2 [ 23.205482] PM: Checking swsusp image. [ 23.205989] PM: Resume from disk failed. [ 23.234307] kjournald starting. Commit interval 5 seconds [ 23.234315] EXT3-fs: mounted filesystem with ordered data mode. [ 23.282496] usb 7-4: new high speed USB device using ehci_hcd and address 2 [ 23.338861] ata4.00: configured for UDMA/33 [ 23.480390] usb 7-4: configuration #1 chosen from 1 choice [ 23.507511] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 23.507552] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 23.985574] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 24.057547] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030293d09b] [ 24.196611] usb 6-1: configuration #1 chosen from 1 choice [ 28.609996] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.636029] Netfilter messages via NETLINK v0.30. [ 28.645485] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 29.953180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.954855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.206886] agpgart: Detected an Intel 965GM Chipset. [ 30.208472] agpgart: Detected 7676K stolen memory. [ 30.221140] agpgart: AGP aperture is 256M @ 0xd0000000 [ 30.229278] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 30.278847] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 30.278872] Yenta: Using CSCINT to route CSC interrupts to PCI [ 30.278874] Yenta: Routing CardBus interrupts to PCI [ 30.278880] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 30.347843] Bluetooth: Core ver 2.11 [ 30.347881] NET: Registered protocol family 31 [ 30.347882] Bluetooth: HCI device and connection manager initialized [ 30.347885] Bluetooth: HCI socket layer initialized [ 30.379271] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.379275] Uniform CD-ROM driver Revision: 3.20 [ 30.379320] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 30.420251] usbcore: registered new interface driver libusual [ 30.509725] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 30.509729] Socket status: 30000006 [ 30.509732] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 30.509737] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 30.509739] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 30.509742] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 30.510026] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 30.510056] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 30.510975] sky2 0000:07:00.0: v1.18 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 30.511401] sky2 eth0: addr 00:1a:80:57:41:ac [ 30.511454] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 30.524116] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.524120] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.537030] Bluetooth: HCI USB driver ver 2.9 [ 30.549075] usbcore: registered new interface driver hci_usb [ 30.569347] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 30.569351] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 30.569436] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 30.569446] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 30.570285] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 30.603454] input: PS/2 Mouse as /class/input/input2 [ 30.611119] Initializing USB Mass Storage driver... [ 30.620021] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 30.621393] scsi5 : SCSI emulation for USB Mass Storage devices [ 30.621481] usb-storage: device found at 2 [ 30.621489] usb-storage: waiting for device to settle before scanning [ 30.621492] usbcore: registered new interface driver usb-storage [ 30.621501] USB Mass Storage support registered. [ 30.626346] Linux video capture interface: v2.00 [ 30.762513] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183a) [ 30.762960] usbcore: registered new interface driver uvcvideo [ 30.762963] USB Video Class driver (v0.1.0) [ 30.852034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 30.852925] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 30.916450] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 30.916605] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 32.372639] lp: driver loaded but no devices found [ 32.480458] usbcam: registering driver r5u870 0.10.0 [ 32.481224] usbcore: registered new interface driver r5u870 [ 32.517075] Adding 449812k swap on /dev/sda2. Priority:-1 extents:1 across:449812k [ 32.847350] EXT3 FS on sda1, internal journal [ 33.389615] kjournald starting. Commit interval 5 seconds [ 33.389923] EXT3 FS on sda3, internal journal [ 33.389926] EXT3-fs: mounted filesystem with ordered data mode. [ 33.969872] ACPI: AC Adapter [ACAD] (on-line) [ 34.094841] ACPI: Battery Slot [BAT1] (battery present) [ 34.103749] input: Power Button (CM) as /class/input/input4 [ 34.103881] ACPI: Power Button (CM) [PWRB] [ 34.104526] input: Lid Switch as /class/input/input5 [ 34.104651] ACPI: Lid Switch [LID0] [ 34.131329] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 34.145284] ACPI: ACPI Dock Station Driver [ 35.277429] ppdev: user-space parallel port driver [ 35.458526] sky2 eth0: enabling interface [ 35.489453] audit(1196786810.229:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5402 profile="/usr/sbin/cupsd" [ 35.620278] usb-storage: device scan complete [ 35.624419] scsi 5:0:0:0: Direct-Access Sony USB HS-CARD 4.82 PQ: 0 ANSI: 0 [ 35.628305] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 35.628336] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 35.708323] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 35.708503] sony-laptop: detected Type2 model [ 35.722001] input: Sony Vaio Keys as /class/input/input6 [ 35.722174] input: Sony Vaio Jogdial as /class/input/input7 [ 35.735720] sony-laptop: device allocated minor is 63 [ 35.735923] sony-laptop: Sony Notebook Control Driver v0.5. [ 36.972788] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 36.972797] vboxdrv: Successfully done. [ 37.387047] Failure registering capabilities with primary security module.
Attachment:
dmidecode.txt.tar.gz
Description: GNU Zip compressed data
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c8000000-caffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1800 [size=32] 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 1820 [size=32] 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 0: Memory at fc304000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: c4000000-c5ffffff Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1840 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 4: I/O ports at 1880 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fc304400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=09, subordinate=0d, sec-latency=32 I/O behind bridge: 00007000-00007fff Memory behind bridge: fc000000-fc0fffff Prefetchable memory behind bridge: 0000000088000000-000000008bffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18a0 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at 18f8 [size=8] Region 1: I/O ports at 18cc [size=4] Region 2: I/O ports at 18f0 [size=8] Region 3: I/O ports at 18c8 [size=4] Region 4: I/O ports at 18e0 [size=16] Region 5: I/O ports at 18d0 [size=16] Capabilities: <access denied> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c00 [size=32] 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ca000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at c8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] Capabilities: <access denied> 06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61) Subsystem: Intel Corporation Unknown device 1100 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 5000 [size=256] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> 09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc004000 (32-bit, non-prefetchable) [size=4K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00007000-000070ff I/O window 1: 00007400-000074ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fc006000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at fc005000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied>
Attachment:
vaio-vgn-sz650n_dsdt.dsl.tar.gz
Description: GNU Zip compressed data
