Hi I checked out my dmesg and it said that I should send this file to you. Thought you might like dmesg and lspci as well. Hope it helps Mike
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable) [ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6cb000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521904) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76E0 checksum 0 [ 0.000000] ACPI: RSDP 000F76E0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6BE7D2, 009C (r1 Sony VAIO 20070712 PTL 0) [ 0.000000] ACPI: FACP 7F6C7BD2, 00F4 (r3 Sony VAIO 20070712 PTL 1) [ 0.000000] ACPI: DSDT 7F6C07F3, 736B (r2 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: FACS 7F6CAFC0, 0040 [ 0.000000] ACPI: APIC 7F6C7CC6, 0068 (r1 Sony VAIO 20070712 PTL 5A) [ 0.000000] ACPI: HPET 7F6C7D2E, 0038 (r1 Sony VAIO 20070712 PTL 5A) [ 0.000000] ACPI: MCFG 7F6C7D66, 003C (r1 Sony VAIO 20070712 PTL 5A) [ 0.000000] ACPI: TCPA 7F6C7DA2, 0032 (r1 Sony VAIO 20070712 PTL 5A52) [ 0.000000] ACPI: TMOR 7F6C7DD4, 0026 (r1 Sony VAIO 20070712 PTL 3) [ 0.000000] ACPI: SLIC 7F6C7DFA, 0176 (r1 Sony VAIO 20070712 PTL 1000000) [ 0.000000] ACPI: APIC 7F6C7F70, 0068 (r1 Sony VAIO 20070712 PTL 0) [ 0.000000] ACPI: BOOT 7F6C7FD8, 0028 (r1 Sony VAIO 20070712 PTL 1) [ 0.000000] ACPI: SSDT 7F6C0132, 06C1 (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BFA24, 070E (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BF902, 0122 (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BEDFA, 025F (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BED54, 00A6 (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: SSDT 7F6BE86E, 04E6 (r1 Sony VAIO 20070712 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f6b0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521904) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f6b0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 521904 [ 0.000000] On node 0 totalpages: 521807 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7079 pages used for memmap [ 0.000000] DMA32 zone: 510729 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 513547 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 29.566644] time.c: Detected 2194.488 MHz processor. [ 29.567993] Console: colour VGA+ 80x25 [ 29.568010] Checking aperture... [ 29.568022] Calgary: detecting Calgary via BIOS EBDA area [ 29.568024] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 29.587012] Memory: 2046288k/2087616k available (2274k kernel code, 40940k reserved, 1181k data, 296k init) [ 29.587051] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 29.664947] Calibrating delay using timer specific routine.. 4393.77 BogoMIPS (lpj=8787540) [ 29.664976] Security Framework v1.0.0 initialized [ 29.664983] SELinux: Disabled at boot. [ 29.665135] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 29.666327] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.666887] Mount-cache hash table entries: 256 [ 29.667006] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.667008] CPU: L2 cache: 4096K [ 29.667010] CPU 0/0 -> Node 0 [ 29.667012] using mwait in idle threads. [ 29.667013] CPU: Physical Processor ID: 0 [ 29.667015] CPU: Processor Core ID: 0 [ 29.667020] CPU0: Thermal monitoring enabled (TM2) [ 29.667029] SMP alternatives: switching to UP code [ 29.667263] Early unpacking initramfs... done [ 29.959695] ACPI: Core revision 20070126 [ 29.959738] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 30.010629] Using local APIC timer interrupts. [ 30.056139] result 12468680 [ 30.056140] Detected 12.468 MHz APIC timer. [ 30.056465] SMP alternatives: switching to SMP code [ 30.056545] Booting processor 1/2 APIC 0x1 [ 30.067033] Initializing CPU#1 [ 30.144302] Calibrating delay using timer specific routine.. 4389.08 BogoMIPS (lpj=8778165) [ 30.144308] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.144310] CPU: L2 cache: 4096K [ 30.144312] CPU 1/1 -> Node 0 [ 30.144313] CPU: Physical Processor ID: 0 [ 30.144314] CPU: Processor Core ID: 1 [ 30.144319] CPU1: Thermal monitoring enabled (TM2) [ 30.144770] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 30.148310] Brought up 2 CPUs [ 30.179474] migration_cost=17 [ 30.179624] NET: Registered protocol family 16 [ 30.179693] ACPI: bus type pci registered [ 30.179699] PCI: Using configuration type 1 [ 30.180724] ACPI: EC: Look up EC in DSDT [ 30.181280] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 30.182405] ACPI: System BIOS is requesting _OSI(Linux) [ 30.182407] ACPI: Please test with "acpi_osi=!Linux" [ 30.182408] Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx [ 30.183112] ACPI: Interpreter enabled [ 30.183114] ACPI: (supports S0 S3 S4 S5) [ 30.183129] ACPI: Using IOAPIC for interrupt routing [ 30.199415] ACPI: EC: GPE=0x17, ports=0x66, 0x62 [ 30.199450] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 30.199460] PCI: Probing PCI hardware (bus 00) [ 30.201982] PCI: Transparent bridge - 0000:00:1e.0 [ 30.202137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 30.202482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 30.202608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 30.202722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 30.202840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 30.202972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 30.209975] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 30.210068] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 30.210159] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 30.210251] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 30.210341] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 30.210432] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 30.210525] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 30.210613] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 30.210707] Linux Plug and Play Support v0.97 (c) Adam Belay [ 30.210716] pnp: PnP ACPI init [ 30.210722] ACPI: bus type pnp registered [ 30.219062] pnp: PnP ACPI: found 12 devices [ 30.219064] ACPI: ACPI bus type pnp unregistered [ 30.219108] PCI: Using ACPI for IRQ routing [ 30.219110] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 30.219257] NET: Registered protocol family 8 [ 30.219259] NET: Registered protocol family 20 [ 30.219273] PCI-GART: No AMD northbridge found. [ 30.219279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 30.219282] hpet0: 3 64-bit timers, 14318180 Hz [ 30.220341] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 30.220344] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 30.220346] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 30.220348] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 30.220587] PCI: Bridge: 0000:00:1c.0 [ 30.220590] IO window: 2000-2fff [ 30.220596] MEM window: f6000000-f7ffffff [ 30.220601] PREFETCH window: f0000000-f1ffffff [ 30.220607] PCI: Bridge: 0000:00:1c.1 [ 30.220610] IO window: 3000-3fff [ 30.220616] MEM window: f8000000-f9ffffff [ 30.220621] PREFETCH window: f2000000-f3ffffff [ 30.220627] PCI: Bridge: 0000:00:1c.2 [ 30.220630] IO window: 4000-4fff [ 30.220636] MEM window: fa000000-fbffffff [ 30.220641] PREFETCH window: f4000000-f5ffffff [ 30.220647] PCI: Bridge: 0000:00:1c.3 [ 30.220650] IO window: 5000-5fff [ 30.220656] MEM window: c8000000-c9ffffff [ 30.220661] PREFETCH window: cc000000-cdffffff [ 30.220668] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 30.220670] IO window: 00006000-000060ff [ 30.220675] IO window: 00006400-000064ff [ 30.220681] PREFETCH window: 88000000-8bffffff [ 30.220686] MEM window: 90000000-93ffffff [ 30.220691] PCI: Bridge: 0000:00:1e.0 [ 30.220694] IO window: 6000-6fff [ 30.220700] MEM window: fc200000-fc2fffff [ 30.220705] PREFETCH window: 88000000-8bffffff [ 30.220735] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 30.220742] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 30.220766] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 30.220772] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 30.220796] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 30.220802] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 30.220826] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 30.220832] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 30.220846] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 30.220865] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 30.220877] NET: Registered protocol family 2 [ 30.224198] Time: hpet clocksource has been installed. [ 30.260209] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 30.260771] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 30.263389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 30.263975] TCP: Hash tables configured (established 262144 bind 65536) [ 30.263977] TCP reno registered [ 30.272270] checking if image is initramfs... it is [ 30.898036] Freeing initrd memory: 7706k freed [ 30.901461] Simple Boot Flag at 0x36 set to 0x1 [ 30.901938] audit: initializing netlink socket (disabled) [ 30.901951] audit(1196468917.296:1): initialized [ 30.903619] VFS: Disk quotas dquot_6.5.1 [ 30.903656] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 30.903728] io scheduler noop registered [ 30.903730] io scheduler anticipatory registered [ 30.903732] io scheduler deadline registered [ 30.903807] io scheduler cfq registered (default) [ 30.903823] Boot video device is 0000:00:02.0 [ 30.907517] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 30.907579] assign_interrupt_mode Found MSI capability [ 30.907582] Allocate Port Service[0000:00:1c.0:pcie00] [ 30.907612] Allocate Port Service[0000:00:1c.0:pcie02] [ 30.907710] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 30.907771] assign_interrupt_mode Found MSI capability [ 30.907773] Allocate Port Service[0000:00:1c.1:pcie00] [ 30.907796] Allocate Port Service[0000:00:1c.1:pcie02] [ 30.907892] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 30.907953] assign_interrupt_mode Found MSI capability [ 30.907954] Allocate Port Service[0000:00:1c.2:pcie00] [ 30.907980] Allocate Port Service[0000:00:1c.2:pcie02] [ 30.908076] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 30.908137] assign_interrupt_mode Found MSI capability [ 30.908139] Allocate Port Service[0000:00:1c.3:pcie00] [ 30.908163] Allocate Port Service[0000:00:1c.3:pcie02] [ 30.924867] Real Time Clock Driver v1.12ac [ 30.925070] hpet_resources: 0xfed00000 is busy [ 30.925092] Linux agpgart interface v0.102 (c) Dave Jones [ 30.925095] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.925922] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.926027] input: Macintosh mouse button emulation as /class/input/input0 [ 30.926089] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 30.928466] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.928470] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.928565] mice: PS/2 mouse device common for all mice [ 30.928668] TCP cubic registered [ 30.928712] NET: Registered protocol family 1 [ 30.928875] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 30.928881] Freeing unused kernel memory: 296k freed [ 30.956437] input: AT Translated Set 2 keyboard as /class/input/input1 [ 32.070667] AppArmor: AppArmor initialized<5>audit(1196468918.464:2): type=1505 info="AppArmor initialized" pid=1277 [ 32.075471] fuse init (API version 7.8) [ 32.078912] Failure registering capabilities with primary security module. [ 32.107571] ACPI: SSDT 7F6BF5C0, 027A (r1 Sony VAIO 20070712 PTL 20050624) [ 32.107757] ACPI: SSDT 7F6BF059, 04E2 (r1 Sony VAIO 20070712 PTL 20050624) [ 32.109868] Monitor-Mwait will be used to enter C-1 state [ 32.109871] Monitor-Mwait will be used to enter C-2 state [ 32.109873] Monitor-Mwait will be used to enter C-3 state [ 32.109876] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 32.109880] ACPI: Processor [CPU0] (supports 8 throttling states) [ 32.110078] ACPI: SSDT 7F6BF83A, 00C8 (r1 Sony VAIO 20070712 PTL 20050624) [ 32.110250] ACPI: SSDT 7F6BF53B, 0085 (r1 Sony VAIO 20070712 PTL 20050624) [ 32.112391] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 32.112395] ACPI: Processor [CPU1] (supports 8 throttling states) [ 32.119965] ACPI: Thermal Zone [ATF0] (64 C) [ 32.120643] ACPI: Thermal Zone [DTS0] (61 C) [ 32.121328] ACPI: Thermal Zone [DTS1] (62 C) [ 32.430304] usbcore: registered new interface driver usbfs [ 32.430325] usbcore: registered new interface driver hub [ 32.430345] usbcore: registered new device driver usb [ 32.431077] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 32.432128] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 32.432135] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 32.432263] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 32.432302] ehci_hcd 0000:00:1a.7: debug port 1 [ 32.432308] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 32.432319] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504000 [ 32.436216] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.436308] usb usb1: configuration #1 chosen from 1 choice [ 32.436328] hub 1-0:1.0: USB hub found [ 32.436335] hub 1-0:1.0: 4 ports detected [ 32.437053] USB Universal Host Controller Interface driver v3.0 [ 32.461426] SCSI subsystem initialized [ 32.481166] libata version 2.21 loaded. [ 32.518824] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 32.519780] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 32.519785] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 32.519831] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 32.519873] ehci_hcd 0000:00:1d.7: debug port 1 [ 32.519880] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 32.519891] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400 [ 32.523777] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.523852] usb usb2: configuration #1 chosen from 1 choice [ 32.523873] hub 2-0:1.0: USB hub found [ 32.523878] hub 2-0:1.0: 6 ports detected [ 32.527294] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 32.527303] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 32.527307] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 32.527321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 32.527347] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 32.527419] usb usb3: configuration #1 chosen from 1 choice [ 32.527437] hub 3-0:1.0: USB hub found [ 32.527442] hub 3-0:1.0: 2 ports detected [ 32.566329] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 32.566342] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 32.566346] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 32.566454] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 32.566487] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 32.566725] usb usb4: configuration #1 chosen from 1 choice [ 32.566832] hub 4-0:1.0: USB hub found [ 32.566836] hub 4-0:1.0: 2 ports detected [ 32.571140] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 32.571149] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 32.571154] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 32.571265] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 32.571296] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 32.571544] usb usb5: configuration #1 chosen from 1 choice [ 32.571653] hub 5-0:1.0: USB hub found [ 32.571657] hub 5-0:1.0: 2 ports detected [ 32.575363] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 32.575374] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 32.575378] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 32.575497] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 32.575528] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 32.575796] usb usb6: configuration #1 chosen from 1 choice [ 32.575914] hub 6-0:1.0: USB hub found [ 32.575918] hub 6-0:1.0: 2 ports detected [ 32.578904] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 32.592518] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 32.592529] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 32.592535] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 32.592677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 32.592702] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 32.592993] usb usb7: configuration #1 chosen from 1 choice [ 32.593125] hub 7-0:1.0: USB hub found [ 32.593130] hub 7-0:1.0: 2 ports detected [ 32.608138] usb 1-2: configuration #1 chosen from 1 choice [ 32.620279] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 32.671053] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 32.671517] ata_piix 0000:00:1f.1: version 2.11 [ 32.671532] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 32.671561] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 32.671665] scsi0 : ata_piix [ 32.671703] scsi1 : ata_piix [ 32.671759] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14 [ 32.671762] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15 [ 32.704960] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 32.710672] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 32.714166] usb 3-1: configuration #1 chosen from 1 choice [ 32.727288] ata1.00: configured for UDMA/33 [ 32.757678] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 32.757729] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 32.763982] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 32.764009] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 32.764046] scsi2 : ata_piix [ 32.764167] scsi3 : ata_piix [ 32.764242] ata3: SATA max UDMA/133 cmd 0x0000000000011c00 ctl 0x00000000000118f6 bmdma 0x00000000000118e0 irq 22 [ 32.764244] ata4: SATA max UDMA/133 cmd 0x00000000000118f8 ctl 0x00000000000118f2 bmdma 0x00000000000118e8 irq 22 [ 32.770910] ata3.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 32.770913] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 32.772637] ata3.00: configured for UDMA/133 [ 32.791976] scsi 2:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 32.795925] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.795934] sd 2:0:0:0: [sda] Write Protect is off [ 32.795936] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.795947] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.795982] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.795989] sd 2:0:0:0: [sda] Write Protect is off [ 32.795990] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.796001] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.796003] sda: sda1 sda2 [ 32.797987] sd 2:0:0:0: [sda] Attached SCSI disk [ 32.800127] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 32.800140] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 32.805647] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.805650] Uniform CD-ROM driver Revision: 3.20 [ 32.805684] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 32.900421] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030293d09b] [ 36.382772] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 36.435147] ISO 9660 Extensions: RRIP_1991A [ 36.708436] Registering unionfs 1.4 [ 36.708439] unionfs: debugging is not enabled [ 36.713872] loop: module loaded [ 36.977888] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 112.729597] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 112.882535] agpgart: Detected an Intel 965GM Chipset. [ 112.884190] agpgart: Detected 7676K stolen memory. [ 112.896555] agpgart: AGP aperture is 256M @ 0xd0000000 [ 113.136079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 114.056077] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 114.056099] Yenta: Enabling burst memory read transactions [ 114.056105] Yenta: Using CSCINT to route CSC interrupts to PCI [ 114.056107] Yenta: Routing CardBus interrupts to PCI [ 114.056113] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 114.287493] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 114.287497] Socket status: 30000006 [ 114.287500] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 114.287505] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 114.287509] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 114.287511] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 114.347371] input: PS/2 Mouse as /class/input/input2 [ 114.363038] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 114.597025] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 114.743150] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 114.743180] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 114.744141] sky2 0000:07:00.0: v1.18 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 114.744530] sky2 eth0: addr 00:1a:80:57:41:ac [ 114.745650] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 114.891324] Linux video capture interface: v2.00 [ 115.061822] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183a) [ 115.063444] usbcore: registered new interface driver uvcvideo [ 115.063448] USB Video Class driver (v0.1.0) [ 115.492229] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 115.492232] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 115.492317] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 115.492326] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 115.493272] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 116.060461] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 116.060664] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 116.332097] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 116.333001] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 120.074277] ACPI: AC Adapter [ACAD] (on-line) [ 120.113137] ACPI: Battery Slot [BAT1] (battery present) [ 120.121961] ACPI: ACPI Dock Station Driver [ 120.140417] input: Power Button (CM) as /class/input/input4 [ 120.140437] ACPI: Power Button (CM) [PWRB] [ 120.140468] input: Lid Switch as /class/input/input5 [ 120.140477] ACPI: Lid Switch [LID0] [ 120.224118] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 126.137886] sky2 eth0: enabling interface [ 126.202177] lp: driver loaded but no devices found [ 126.401880] ppdev: user-space parallel port driver [ 129.197119] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 129.197274] sony-laptop: detected Type2 model [ 129.199176] input: Sony Vaio Keys as /class/input/input6 [ 129.199296] input: Sony Vaio Jogdial as /class/input/input7 [ 129.211687] sony-laptop: device allocated minor is 63 [ 129.212822] sony-laptop: Sony Notebook Control Driver v0.5. [ 129.515638] Failure registering capabilities with primary security module. [ 130.435795] Bluetooth: Core ver 2.11 [ 130.435888] NET: Registered protocol family 31 [ 130.435892] Bluetooth: HCI device and connection manager initialized [ 130.435899] Bluetooth: HCI socket layer initialized [ 130.499213] Bluetooth: L2CAP ver 2.8 [ 130.499221] Bluetooth: L2CAP socket layer initialized [ 130.979275] Bluetooth: RFCOMM socket layer initialized [ 130.979444] Bluetooth: RFCOMM TTY layer initialized [ 130.979450] Bluetooth: RFCOMM ver 1.8 [ 140.824858] [drm] Initialized drm 1.1.0 20060810 [ 140.867580] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 140.870246] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 290.427579] JFS: nTxBlock = 8192, nTxLock = 65536 [ 290.747543] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 290.751467] SGI XFS Quota Management subsystem [ 291.106982] program parted_devices is using a deprecated SCSI ioctl, please convert it to SG_IO [ 312.992373] iwl4965: Radio Frequency Kill Switch is On: [ 312.992379] Kill switch must be turned off for wireless networking to work. [ 407.269876] program parted_devices is using a deprecated SCSI ioctl, please convert it to SG_IO [ 647.365724] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 647.544013] QNX4 filesystem 0.2.3 registered. [ 647.622530] cramfs: wrong magic [ 649.975414] Unable to identify CD-ROM format. [ 649.982787] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 650.115810] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 650.394763] cramfs: wrong magic [ 650.434127] Unable to identify CD-ROM format. [ 650.436436] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 650.448608] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 651.772353] cramfs: wrong magic [ 651.805993] Unable to identify CD-ROM format. [ 651.809905] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 651.933731] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 664.090508] program parted_devices is using a deprecated SCSI ioctl, please convert it to SG_IO [ 715.942861] cramfs: wrong magic [ 715.976824] Unable to identify CD-ROM format. [ 715.980389] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 716.039499] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 716.142163] cramfs: wrong magic [ 716.493183] cramfs: wrong magic [ 716.532859] Unable to identify CD-ROM format. [ 716.535168] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 716.549647] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 716.641819] cramfs: wrong magic [ 717.400339] cramfs: wrong magic [ 717.434719] Unable to identify CD-ROM format. [ 717.437867] SQUASHFS error: Can't find a SQUASHFS superblock on sda1 [ 717.489557] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2 [ 717.570485] cramfs: wrong magic [ 721.513654] Adding 449812k swap on /dev/sda3. Priority:-1 extents:1 across:449812k [ 727.665295] kjournald starting. Commit interval 5 seconds [ 727.666000] EXT3 FS on sda1, internal journal [ 727.666138] EXT3-fs: mounted filesystem with ordered data mode.
# dmidecode 2.9 # dmidecode 2.9 SMBIOS 2.4 present. 20 structures occupying 1176 bytes. Table at 0x7F6CB000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies LTD Version: R0081S5 Release Date: 07/12/2007 Address: 0xE5240 Runtime Size: 110016 bytes ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PC Card (PCMCIA) is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 8.1 Firmware Revision: 8.1 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Sony Corporation Product Name: VGN-SZ650N Version: J002UR2M Serial Number: 28205633-3028891 UUID: 9C4FAD20-0EBE-11DC-807E-001A805741AC Wake-up Type: Power Switch SKU Number: N/A Family: N/A Handle 0x0002, DMI type 2, 9 bytes Base Board Information Manufacturer: Sony Corporation Product Name: VAIO Version: N/A Serial Number: N/A Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Sony Corporation Type: Notebook Lock: Not Present Version: N/A Serial Number: Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: N/A Type: Central Processor Family: Other Manufacturer: GenuineIntel ID: FB 06 00 00 FF FB EB BF Version: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz Voltage: 1.2 V External Clock: 200 MHz Max Speed: 2200 MHz Current Speed: 2200 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: N/A Asset Tag: N/A Part Number: N/A Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unknown Associativity: Unknown Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 4096 KB Maximum Size: 4096 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: Unknown Handle 0x0007, DMI type 9, 13 bytes System Slot Information Designation: PCCARD1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 1 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0008, DMI type 11, 5 bytes OEM Strings String 1: 0000010012 String 2: FNC-HDPWCCIA0oke String 3: 02VE0000000061BDF8F005D20C05 String 4: Reserved String 5: Reserved Handle 0x0009, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1000 MB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x000A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0009 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: SODIMM Set: 1 Locator: M1 Bank Locator: Bank 0 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz (1.5 ns) Manufacturer: Mfg 0 Serial Number: 1234-B0 Asset Tag: Not Specified Part Number: SODIMM000 Handle 0x000B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0009 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: SODIMM Set: 1 Locator: M2 Bank Locator: Bank 1 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz (1.5 ns) Manufacturer: Mfg 1 Serial Number: 1234-B1 Asset Tag: Not Specified Part Number: SODIMM001 Handle 0x000C, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0009 Partition Width: 0 Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000C Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x000B Memory Array Mapped Address Handle: 0x000C Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000F, DMI type 32, 20 bytes System Boot Information Status: <OUT OF SPEC> Handle 0x0010, DMI type 129, 16 bytes OEM-specific Type Header and Data: 81 10 10 00 01 01 02 01 00 00 00 01 00 00 08 01 Strings: Intel_ASF_001 Intel_ASF_001 Handle 0x0011, DMI type 136, 11 bytes OEM-specific Type Header and Data: 88 0B 11 00 01 44 49 52 53 03 03 Strings: Sony Corporation Handle 0x0012, DMI type 150, 14 bytes OEM-specific Type Header and Data: 96 0E 12 00 01 01 00 00 00 00 00 00 00 00 Strings: ABSOLUTE(PHOENIX) CLM Handle 0x0013, DMI type 127, 4 bytes End Of Table
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Capabilities: <access denied> 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1820 [size=32] 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 1840 [size=32] 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 0: Memory at fc504000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c8000000-c9ffffff Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 1880 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 4: I/O ports at 18a0 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fc504400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=09, subordinate=0d, sec-latency=32 I/O behind bridge: 00006000-00006fff Memory behind bridge: fc200000-fc2fffff Prefetchable memory behind bridge: 0000000088000000-000000008bffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at 1c00 [size=8] Region 1: I/O ports at 18f4 [size=4] Region 2: I/O ports at 18f8 [size=8] Region 3: I/O ports at 18f0 [size=4] Region 4: I/O ports at 18e0 [size=16] Region 5: I/O ports at 18d0 [size=16] Capabilities: <access denied> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c20 [size=32] 06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61) Subsystem: Intel Corporation Unknown device 1100 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 4000 [size=256] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> 09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Sony Corporation Unknown device 9008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc204000 (32-bit, non-prefetchable) [size=4K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00006000-000060ff I/O window 1: 00006400-000064ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fc206000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fc200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Subsystem: Sony Corporation Unknown device 9008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at fc205000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied>
