without "acpi_osi=!Linux" dmidecode_1.txt boot.txt = dmesg with "acpi_osi=!Linux" dmidecode_2.txt boot2.txt = dmesg
# dmidecode 2.9 SMBIOS 2.4 present. 37 structures occupying 1293 bytes. Table at 0x000F0420. Handle 0xDA00, DMI type 218, 131 bytes OEM-specific Type Header and Data: DA 83 00 DA B0 00 92 1B 07 02 00 7D 00 00 00 00 00 80 01 16 00 01 00 7F 01 16 00 00 00 75 01 75 01 01 00 76 01 76 01 01 00 2E 00 25 00 00 00 6E 00 25 00 01 00 2D 00 25 00 02 00 8A 01 48 00 01 00 89 01 48 00 00 00 9B 00 23 00 01 00 9C 00 23 00 00 00 14 01 46 00 00 00 15 01 46 00 01 00 16 01 46 00 02 00 94 01 47 00 01 00 93 01 47 00 00 00 EA 00 67 00 01 00 EB 00 67 00 00 00 FF FF 00 00 00 00 Handle 0x0001, DMI type 0, 24 bytes BIOS Information Vendor: Dell Inc. Version: 2.6.1 Release Date: 08/23/2006 Address: 0xE5860 Runtime Size: 108448 bytes ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported Handle 0x0002, DMI type 1, 27 bytes System Information Manufacturer: Dell Inc. Product Name: Vostro 1000 Version: Not Specified Serial Number: DRCG0F1 UUID: 44454C4C-5200-1043-8047-C4C04F304631 Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x0003, DMI type 2, 8 bytes Base Board Information Manufacturer: Dell Inc. Product Name: 0WY383 Version: Serial Number: .DRCG0F1.CN4864379E7426. Handle 0x0004, DMI type 3, 17 bytes Chassis Information Manufacturer: Dell Inc. Type: Portable Lock: Not Present Version: Not Specified Serial Number: DRCG0F1 Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0005, DMI type 4, 35 bytes Processor Information Socket Designation: Socket M2/S1G1 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 81 0F 06 00 FF FB 8B 17 Signature: Family 15, Model 104, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology) Version: Engineering Sample Voltage: 1.4 V External Clock: 200 MHz Max Speed: 4000 MHz Current Speed: 1700 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: Not Provided L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Pipeline Burst Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0007, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J28 Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Microphone In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Speaker Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0011, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0012, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0013, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Disabled Description: ATI RS485M Handle 0x0014, DMI type 10, 6 bytes On Board Device Information Type: Sound Status: Disabled Description: Sigmatel Handle 0x0015, DMI type 11, 5 bytes OEM Strings String 1: Dell System String 2: 5 String 3: 13 Handle 0x0016, DMI type 12, 5 bytes System Configuration Options Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS Handle 0x0017, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x0018, DMI type 15, 29 bytes System Event Log Area Length: 16 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x00000000 Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0019, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 1 Locator: DIMM_A Bank Locator: <BAD INDEX> Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 2 Locator: DIMM_B Bank Locator: <BAD INDEX> Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001C, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001D, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x0019 Partition Width: 0 Handle 0x001E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001D Partition Row Position: 2 Interleave Position: 1 Interleaved Data Depth: 6 Handle 0x001F, DMI type 22, 26 bytes Portable Battery Location: System Battery Bay Manufacturer: Sanyo DELLTM7877 Name: Sanyo DELLTM7877 Chemistry: Lithium Ion Design Capacity: 29000 mWh Design Voltage: 14800 mV SBDS Version: Bat123 Maximum Error: Unknown SBDS Serial Number: 0021 SBDS Manufacture Date: 1980-00-00 OEM-specific Information: 0x00000000 Handle 0x0020, DMI type 32, 20 bytes System Boot Information Status: <OUT OF SPEC> Handle 0xB100, DMI type 177, 12 bytes OEM-specific Type Header and Data: B1 0C 00 B1 02 00 00 00 00 00 00 00 Handle 0xD000, DMI type 208, 10 bytes OEM-specific Type Header and Data: D0 0A 00 D0 01 05 FE 00 2A 02 Handle 0xD400, DMI type 212, 17 bytes OEM-specific Type Header and Data: D4 11 00 D4 70 00 71 00 00 10 2D 2E FF FF 00 00 00 Handle 0x0024, DMI type 127, 4 bytes End Of Table
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=08649f36-292b-4dff-96fb-06d93825ab74 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) [ 0.000000] BIOS-e820: 0000000037e70000 - 0000000037e80000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037e80000 - 0000000037f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 228976) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8500 checksum 0 [ 0.000000] ACPI: RSDP 000F8500, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 37E79539, 0040 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: FACP 37E7FB58, 0074 (r1 ATI Bowfin 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37E79579, 65DF (r1 ATI SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 37E90FC0, 0040 [ 0.000000] ACPI: TCPA 37E7FBCC, 0032 (r2 AMD 6040000 PTEC 0) [ 0.000000] ACPI: SSDT 37E7FBFE, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37E7FDC2, 0054 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 37E7FE16, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 37E7FE52, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: SLIC 37E7FE8A, 0176 (r1 DELL M08 6040000 LTP 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037e70000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 228976) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037e70000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 228976 [ 0.000000] On node 0 totalpages: 228877 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2816 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3074 pages used for memmap [ 0.000000] DMA32 zone: 221806 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 224622 [ 0.000000] Kernel command line: root=UUID=08649f36-292b-4dff-96fb-06d93825ab74 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 16.275887] time.c: Detected 1695.757 MHz processor. [ 16.276716] Console: colour VGA+ 80x25 [ 16.276734] Checking aperture... [ 16.276738] CPU 0: aperture @ 2c50000000 size 32 MB [ 16.276740] Aperture too small (32 MB) [ 16.287317] No AGP bridge found [ 16.296675] Memory: 890572k/915904k available (2274k kernel code, 24936k reserved, 1181k data, 296k init) [ 16.296730] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.372775] Calibrating delay using timer specific routine.. 3394.46 BogoMIPS (lpj=6788920) [ 16.372811] Security Framework v1.0.0 initialized [ 16.372818] SELinux: Disabled at boot. [ 16.372918] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.373590] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.373909] Mount-cache hash table entries: 256 [ 16.374057] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.374060] CPU: L2 Cache: 256K (64 bytes/line) [ 16.374064] CPU 0/0 -> Node 0 [ 16.374066] CPU: Physical Processor ID: 0 [ 16.374068] CPU: Processor Core ID: 0 [ 16.374088] SMP alternatives: switching to UP code [ 16.374359] Early unpacking initramfs... done [ 16.738207] ACPI: Core revision 20070126 [ 16.738278] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.814892] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 17.854914] Using local APIC timer interrupts. [ 17.913804] result 12468799 [ 17.913806] Detected 12.468 MHz APIC timer. [ 17.914653] SMP alternatives: switching to SMP code [ 17.914796] Booting processor 1/2 APIC 0x1 [ 17.925391] Initializing CPU#1 [ 18.002984] Calibrating delay using timer specific routine.. 3391.58 BogoMIPS (lpj=6783174) [ 18.002992] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.002995] CPU: L2 Cache: 256K (64 bytes/line) [ 18.002998] CPU 1/1 -> Node 0 [ 18.003001] CPU: Physical Processor ID: 0 [ 18.003002] CPU: Processor Core ID: 1 [ 18.003085] AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 [ 18.006457] Brought up 2 CPUs [ 18.212591] migration_cost=134 [ 18.212280] NET: Registered protocol family 16 [ 18.212390] ACPI: bus type pci registered [ 18.212398] PCI: Using configuration type 1 [ 18.213486] ACPI: EC: Look up EC in DSDT [ 18.214673] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 18.221314] ACPI: System BIOS is requesting _OSI(Linux) [ 18.221317] ACPI: Please test with "acpi_osi=!Linux" [ 18.221319] Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx [ 18.221614] ACPI: Interpreter enabled [ 18.221617] ACPI: (supports S0 S3 S4 S5) [ 18.221635] ACPI: Using IOAPIC for interrupt routing [ 18.228469] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 18.228521] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.228528] PCI: Probing PCI hardware (bus 00) [ 18.229992] PCI: Transparent bridge - 0000:00:14.4 [ 18.230036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.230247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 18.230370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 18.230512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 18.230623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 18.233906] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 18.234032] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 18.234153] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 18.234274] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 18.234395] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 18.234518] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 18.234640] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 18.234771] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 18.234900] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 18.234998] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.235013] pnp: PnP ACPI init [ 18.235024] ACPI: bus type pnp registered [ 18.237862] pnp: PnP ACPI: found 11 devices [ 18.237865] ACPI: ACPI bus type pnp unregistered [ 18.237935] PCI: Using ACPI for IRQ routing [ 18.237938] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.237947] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 18.237988] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 18.238141] NET: Registered protocol family 8 [ 18.238143] NET: Registered protocol family 20 [ 18.238235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 18.238241] hpet0: 4 32-bit timers, 14318180 Hz [ 18.239323] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 18.239328] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 18.239332] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 18.239342] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 18.239347] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 18.239353] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 18.239357] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 18.239361] pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved [ 18.239365] pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 18.239718] PCI: Bridge: 0000:00:01.0 [ 18.239721] IO window: 9000-9fff [ 18.239725] MEM window: c0100000-c01fffff [ 18.239729] PREFETCH window: c8000000-cfffffff [ 18.239732] PCI: Bridge: 0000:00:05.0 [ 18.239734] IO window: disabled. [ 18.239736] MEM window: disabled. [ 18.239739] PREFETCH window: disabled. [ 18.239742] PCI: Bridge: 0000:00:06.0 [ 18.239743] IO window: disabled. [ 18.239747] MEM window: c0200000-c02fffff [ 18.239749] PREFETCH window: disabled. [ 18.239753] PCI: Bridge: 0000:00:14.4 [ 18.239754] IO window: disabled. [ 18.239760] MEM window: c0300000-c03fffff [ 18.239765] PREFETCH window: disabled. [ 18.239784] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 18.239792] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 18.239859] NET: Registered protocol family 2 [ 18.242111] Time: hpet clocksource has been installed. [ 18.286647] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 18.287108] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 18.289009] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.289611] TCP: Hash tables configured (established 131072 bind 65536) [ 18.289615] TCP reno registered [ 18.302709] checking if image is initramfs... it is [ 19.012509] Freeing initrd memory: 7750k freed [ 19.017938] audit: initializing netlink socket (disabled) [ 19.017951] audit(1195601147.624:1): initialized [ 19.020393] VFS: Disk quotas dquot_6.5.1 [ 19.020456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.020561] io scheduler noop registered [ 19.020564] io scheduler anticipatory registered [ 19.020566] io scheduler deadline registered [ 19.020679] io scheduler cfq registered (default) [ 19.020693] PCI: MSI quirk detected. MSI deactivated. [ 19.021965] Boot video device is 0000:01:05.0 [ 19.022155] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 19.022177] assign_interrupt_mode Found MSI capability [ 19.022180] Allocate Port Service[0000:00:05.0:pcie00] [ 19.022228] Allocate Port Service[0000:00:05.0:pcie02] [ 19.022296] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 19.022317] assign_interrupt_mode Found MSI capability [ 19.022320] Allocate Port Service[0000:00:06.0:pcie00] [ 19.022357] Allocate Port Service[0000:00:06.0:pcie02] [ 19.053548] Real Time Clock Driver v1.12ac [ 19.053754] hpet_resources: 0xfed00000 is busy [ 19.053775] Linux agpgart interface v0.102 (c) Dave Jones [ 19.053778] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.055222] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.055366] input: Macintosh mouse button emulation as /class/input/input0 [ 19.055456] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 19.058304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.058309] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.058508] mice: PS/2 mouse device common for all mice [ 19.058655] TCP cubic registered [ 19.058720] NET: Registered protocol family 1 [ 19.058948] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.058959] Freeing unused kernel memory: 296k freed [ 19.093502] input: AT Raw Set 2 keyboard as /class/input/input1 [ 20.295495] AppArmor: AppArmor initialized<5>audit(1195601148.904:2): type=1505 info="AppArmor initialized" pid=1235 [ 20.310750] fuse init (API version 7.8) [ 20.320193] Failure registering capabilities with primary security module. [ 20.367223] ACPI: Processor [CPU0] (supports 8 throttling states) [ 20.376550] ACPI: Thermal Zone [THRM] (51 C) [ 21.097768] usbcore: registered new interface driver usbfs [ 21.097799] usbcore: registered new interface driver hub [ 21.097827] usbcore: registered new device driver usb [ 21.106807] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.106849] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.106985] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 21.107186] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 21.107214] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 [ 21.151156] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.151164] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.182656] usb usb1: configuration #1 chosen from 1 choice [ 21.182688] hub 1-0:1.0: USB hub found [ 21.182703] hub 1-0:1.0: 2 ports detected [ 21.234347] SCSI subsystem initialized [ 21.241242] libata version 2.21 loaded. [ 21.289994] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.290134] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 21.290215] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 21.290241] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 [ 21.349891] usb usb2: configuration #1 chosen from 1 choice [ 21.349927] hub 2-0:1.0: USB hub found [ 21.349939] hub 2-0:1.0: 2 ports detected [ 21.457747] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.457886] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 21.457967] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 21.457993] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 [ 21.517620] usb usb3: configuration #1 chosen from 1 choice [ 21.517649] hub 3-0:1.0: USB hub found [ 21.517661] hub 3-0:1.0: 2 ports detected [ 21.627521] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [ 21.627660] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 21.627729] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 4 [ 21.627779] ehci_hcd 0000:00:13.5: debug port 1 [ 21.627798] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 [ 21.789139] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 21.789161] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.789292] usb usb4: configuration #1 chosen from 1 choice [ 21.789323] hub 4-0:1.0: USB hub found [ 21.789332] hub 4-0:1.0: 10 ports detected [ 21.898679] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 21.898693] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.898707] SB600_PATA: chipset revision 0 [ 21.898710] SB600_PATA: not 100% native mode: will probe irqs later [ 21.898720] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [ 21.898733] Probing IDE interface ide0... [ 22.512128] usb 2-1: new low speed USB device using ohci_hcd and address 3 [ 22.636765] hda: PBDS DVD+/-RW DS-8W1P, ATAPI CD/DVD-ROM drive [ 22.742939] usb 2-1: configuration #1 chosen from 1 choice [ 23.311429] hda: selected mode 0x42 [ 23.312443] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 23.338886] ahci 0000:00:12.0: version 2.2 [ 23.338916] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 23.339059] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 24.345621] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 24.345627] ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part [ 24.346652] scsi0 : ahci [ 24.346732] scsi1 : ahci [ 24.346791] scsi2 : ahci [ 24.346845] scsi3 : ahci [ 24.346945] ata1: SATA max UDMA/133 cmd 0xffffc200005f4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 24.346951] ata2: SATA max UDMA/133 cmd 0xffffc200005f4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 24.346957] ata3: SATA max UDMA/133 cmd 0xffffc200005f4200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 24.346963] ata4: SATA max UDMA/133 cmd 0xffffc200005f4280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 24.833243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 25.195793] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL240D, max UDMA/100 [ 25.195797] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 25.196691] ata1.00: configured for UDMA/100 [ 25.508274] ata2: SATA link down (SStatus 0 SControl 300) [ 25.823824] ata3: SATA link down (SStatus 0 SControl 300) [ 26.139373] ata4: SATA link down (SStatus 0 SControl 300) [ 26.139210] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL24 PQ: 0 ANSI: 5 [ 26.140449] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.140591] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 26.140668] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 26.140689] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 [ 26.155065] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 26.159080] sd 0:0:0:0: [sda] Write Protect is off [ 26.159085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.163072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.167081] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 26.167091] sd 0:0:0:0: [sda] Write Protect is off [ 26.167094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.167108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.167113] sda:<6>usb usb5: configuration #1 chosen from 1 choice [ 26.199183] hub 5-0:1.0: USB hub found [ 26.199196] hub 5-0:1.0: 2 ports detected [ 26.229108] sda1 sda2 sda3 < sda5 > [ 26.256950] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.263129] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.307006] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.307150] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 26.307224] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 26.307245] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 [ 26.366937] usb usb6: configuration #1 chosen from 1 choice [ 26.366973] hub 6-0:1.0: USB hub found [ 26.366987] hub 6-0:1.0: 2 ports detected [ 26.474914] b44.c:v1.01 (Jun 16, 2006) [ 26.474943] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 26.478576] eth0: Broadcom 4400 10/100BaseT Ethernet 00:1c:23:a2:47:82 [ 26.510563] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 26.510583] Uniform CD-ROM driver Revision: 3.20 [ 26.531961] usbcore: registered new interface driver hiddev [ 26.538413] input: USB Wheel Mouse as /class/input/input2 [ 26.538604] input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:13.1-1 [ 26.538624] usbcore: registered new interface driver usbhid [ 26.538628] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 26.600363] Attempting manual resume [ 26.600368] swsusp: Resume From Partition 8:5 [ 26.600370] PM: Checking swsusp image. [ 26.600643] PM: Resume from disk failed. [ 26.618901] EXT3-fs: INFO: recovery required on readonly filesystem. [ 26.618909] EXT3-fs: write access will be enabled during recovery. [ 29.979172] kjournald starting. Commit interval 5 seconds [ 29.979195] EXT3-fs: sda2: orphan cleanup on readonly fs [ 29.979204] ext3_orphan_cleanup: deleting unreferenced inode 6176818 [ 30.012847] ext3_orphan_cleanup: deleting unreferenced inode 426344 [ 30.325211] ext3_orphan_cleanup: deleting unreferenced inode 6176867 [ 30.325223] ext3_orphan_cleanup: deleting unreferenced inode 6176866 [ 30.325233] ext3_orphan_cleanup: deleting unreferenced inode 6176863 [ 30.325243] ext3_orphan_cleanup: deleting unreferenced inode 6176862 [ 30.325252] ext3_orphan_cleanup: deleting unreferenced inode 6176861 [ 30.381541] ext3_orphan_cleanup: deleting unreferenced inode 529290 [ 30.404831] ext3_orphan_cleanup: deleting unreferenced inode 1409028 [ 30.424359] ext3_orphan_cleanup: deleting unreferenced inode 1409027 [ 30.424375] ext3_orphan_cleanup: deleting unreferenced inode 1409025 [ 30.445608] ext3_orphan_cleanup: deleting unreferenced inode 180672 [ 30.455333] ext3_orphan_cleanup: deleting unreferenced inode 181858 [ 30.478396] ext3_orphan_cleanup: deleting unreferenced inode 262753 [ 30.486743] ext3_orphan_cleanup: deleting unreferenced inode 262748 [ 30.496724] ext3_orphan_cleanup: deleting unreferenced inode 1327105 [ 30.500200] ext3_orphan_cleanup: deleting unreferenced inode 182129 [ 30.532118] ext3_orphan_cleanup: deleting unreferenced inode 475195 [ 30.556827] ext3_orphan_cleanup: deleting unreferenced inode 5243061 [ 30.556849] EXT3-fs: sda2: 19 orphan inodes deleted [ 30.556852] EXT3-fs: recovery complete. [ 30.597596] EXT3-fs: mounted filesystem with ordered data mode. [ 39.168164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.170935] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.561757] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 40.036224] input: PC Speaker as /class/input/input3 [ 40.065376] sdhci: Secure Digital Host Controller Interface driver [ 40.065382] sdhci: Copyright(c) Pierre Ossman [ 40.065443] sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) [ 40.065471] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 40.065763] mmc0: SDHCI at 0xc0302800 irq 20 DMA [ 40.292870] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.461285] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [ 40.496509] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 40.978007] lp: driver loaded but no devices found [ 41.051795] ndiswrapper version 1.45 loaded (smp=yes) [ 41.119315] usbcore: registered new interface driver ndiswrapper [ 41.194853] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 41.498349] EXT3 FS on sda2, internal journal
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=08649f36-292b-4dff-96fb-06d93825ab74 ro quiet splash acpi_osi=!Linux [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) [ 0.000000] BIOS-e820: 0000000037e70000 - 0000000037e80000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037e80000 - 0000000037f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 228976) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8500 checksum 0 [ 0.000000] ACPI: RSDP 000F8500, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 37E79539, 0040 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: FACP 37E7FB58, 0074 (r1 ATI Bowfin 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37E79579, 65DF (r1 ATI SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 37E90FC0, 0040 [ 0.000000] ACPI: TCPA 37E7FBCC, 0032 (r2 AMD 6040000 PTEC 0) [ 0.000000] ACPI: SSDT 37E7FBFE, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37E7FDC2, 0054 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 37E7FE16, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 37E7FE52, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: SLIC 37E7FE8A, 0176 (r1 DELL M08 6040000 LTP 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037e70000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 228976) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037e70000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 228976 [ 0.000000] On node 0 totalpages: 228877 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2816 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3074 pages used for memmap [ 0.000000] DMA32 zone: 221806 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 224622 [ 0.000000] Kernel command line: root=UUID=08649f36-292b-4dff-96fb-06d93825ab74 ro quiet splash acpi_osi=!Linux [ 0.000000] ACPI: Disabled _OSI(Linux) [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 16.937474] time.c: Detected 1695.750 MHz processor. [ 16.938305] Console: colour VGA+ 80x25 [ 16.938323] Checking aperture... [ 16.938327] CPU 0: aperture @ 2c50000000 size 32 MB [ 16.938329] Aperture too small (32 MB) [ 16.948935] No AGP bridge found [ 16.958294] Memory: 890572k/915904k available (2274k kernel code, 24936k reserved, 1181k data, 296k init) [ 16.958348] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 17.034356] Calibrating delay using timer specific routine.. 3394.49 BogoMIPS (lpj=6788989) [ 17.034393] Security Framework v1.0.0 initialized [ 17.034400] SELinux: Disabled at boot. [ 17.034501] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.035176] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.035496] Mount-cache hash table entries: 256 [ 17.035644] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.035647] CPU: L2 Cache: 256K (64 bytes/line) [ 17.035650] CPU 0/0 -> Node 0 [ 17.035653] CPU: Physical Processor ID: 0 [ 17.035655] CPU: Processor Core ID: 0 [ 17.035675] SMP alternatives: switching to UP code [ 17.035946] Early unpacking initramfs... done [ 17.399791] ACPI: Core revision 20070126 [ 17.399862] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.476617] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 18.516640] Using local APIC timer interrupts. [ 18.575530] result 12468746 [ 18.575532] Detected 12.468 MHz APIC timer. [ 18.576233] SMP alternatives: switching to SMP code [ 18.576375] Booting processor 1/2 APIC 0x1 [ 18.586985] Initializing CPU#1 [ 18.664578] Calibrating delay using timer specific routine.. 3391.48 BogoMIPS (lpj=6782979) [ 18.664586] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.664589] CPU: L2 Cache: 256K (64 bytes/line) [ 18.664592] CPU 1/1 -> Node 0 [ 18.664594] CPU: Physical Processor ID: 0 [ 18.664596] CPU: Processor Core ID: 1 [ 18.664677] AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 [ 18.668037] Brought up 2 CPUs [ 18.852250] migration_cost=122 [ 18.851929] NET: Registered protocol family 16 [ 18.852039] ACPI: bus type pci registered [ 18.852046] PCI: Using configuration type 1 [ 18.853135] ACPI: EC: Look up EC in DSDT [ 18.854304] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 18.862202] ACPI: System BIOS is requesting _OSI(Linux) [ 18.862205] ACPI: Please test with "acpi_osi=!Linux" [ 18.862206] Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx [ 18.862496] ACPI: Interpreter enabled [ 18.862499] ACPI: (supports S0 S3 S4 S5) [ 18.862517] ACPI: Using IOAPIC for interrupt routing [ 18.869473] ACPI: EC: GPE=0x14, ports=0x66, 0x62 [ 18.869524] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.869531] PCI: Probing PCI hardware (bus 00) [ 18.870997] PCI: Transparent bridge - 0000:00:14.4 [ 18.871040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.871252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 18.871376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 18.871517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 18.871627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 18.874916] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 18.875042] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 18.875165] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 18.875286] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 18.875408] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 18.875530] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 18.875652] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 18.875774] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 18.875902] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 18.875998] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.876013] pnp: PnP ACPI init [ 18.876024] ACPI: bus type pnp registered [ 18.910560] pnp: PnP ACPI: found 11 devices [ 18.910563] ACPI: ACPI bus type pnp unregistered [ 18.910635] PCI: Using ACPI for IRQ routing [ 18.910638] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.910645] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 18.910686] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 18.910840] NET: Registered protocol family 8 [ 18.910843] NET: Registered protocol family 20 [ 18.910938] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 18.910944] hpet0: 4 32-bit timers, 14318180 Hz [ 18.912014] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 18.912019] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 18.912023] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 18.912034] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 18.912038] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 18.912045] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 18.912049] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 18.912053] pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved [ 18.912057] pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 18.911679] Time: hpet clocksource has been installed. [ 18.912424] PCI: Bridge: 0000:00:01.0 [ 18.912427] IO window: 9000-9fff [ 18.912432] MEM window: c0100000-c01fffff [ 18.912436] PREFETCH window: c8000000-cfffffff [ 18.912439] PCI: Bridge: 0000:00:05.0 [ 18.912440] IO window: disabled. [ 18.912443] MEM window: disabled. [ 18.912445] PREFETCH window: disabled. [ 18.912448] PCI: Bridge: 0000:00:06.0 [ 18.912450] IO window: disabled. [ 18.912453] MEM window: c0200000-c02fffff [ 18.912456] PREFETCH window: disabled. [ 18.912459] PCI: Bridge: 0000:00:14.4 [ 18.912461] IO window: disabled. [ 18.912467] MEM window: c0300000-c03fffff [ 18.912472] PREFETCH window: disabled. [ 18.912492] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 18.912499] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 18.912567] NET: Registered protocol family 2 [ 18.956224] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 18.956685] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 18.958618] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.959222] TCP: Hash tables configured (established 131072 bind 65536) [ 18.959227] TCP reno registered [ 18.968290] checking if image is initramfs... it is [ 19.679637] Freeing initrd memory: 7750k freed [ 19.685013] audit: initializing netlink socket (disabled) [ 19.685027] audit(1195614256.632:1): initialized [ 19.687490] VFS: Disk quotas dquot_6.5.1 [ 19.687554] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.687659] io scheduler noop registered [ 19.687661] io scheduler anticipatory registered [ 19.687664] io scheduler deadline registered [ 19.687775] io scheduler cfq registered (default) [ 19.687789] PCI: MSI quirk detected. MSI deactivated. [ 19.689037] Boot video device is 0000:01:05.0 [ 19.689225] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 19.689247] assign_interrupt_mode Found MSI capability [ 19.689251] Allocate Port Service[0000:00:05.0:pcie00] [ 19.689304] Allocate Port Service[0000:00:05.0:pcie02] [ 19.689371] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 19.689392] assign_interrupt_mode Found MSI capability [ 19.689395] Allocate Port Service[0000:00:06.0:pcie00] [ 19.689431] Allocate Port Service[0000:00:06.0:pcie02] [ 19.720896] Real Time Clock Driver v1.12ac [ 19.721107] hpet_resources: 0xfed00000 is busy [ 19.721129] Linux agpgart interface v0.102 (c) Dave Jones [ 19.721132] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.722564] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.722709] input: Macintosh mouse button emulation as /class/input/input0 [ 19.722801] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 19.724880] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.724886] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.725083] mice: PS/2 mouse device common for all mice [ 19.725228] TCP cubic registered [ 19.725291] NET: Registered protocol family 1 [ 19.725519] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.725530] Freeing unused kernel memory: 296k freed [ 19.755581] input: AT Translated Set 2 keyboard as /class/input/input1 [ 20.960598] AppArmor: AppArmor initialized<5>audit(1195614257.912:2): type=1505 info="AppArmor initialized" pid=1235 [ 20.976670] fuse init (API version 7.8) [ 20.985715] Failure registering capabilities with primary security module. [ 21.013637] ACPI: Processor [CPU0] (supports 8 throttling states) [ 21.016217] ACPI: Thermal Zone [THRM] (47 C) [ 21.737777] SCSI subsystem initialized [ 21.744314] libata version 2.21 loaded. [ 21.746157] ahci 0000:00:12.0: version 2.2 [ 21.746184] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 21.746323] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 21.754780] usbcore: registered new interface driver usbfs [ 21.754807] usbcore: registered new interface driver hub [ 21.754834] usbcore: registered new device driver usb [ 21.755797] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.832942] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.832950] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 22.750253] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 22.750260] ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part [ 22.751267] scsi0 : ahci [ 22.751626] scsi1 : ahci [ 22.751863] scsi2 : ahci [ 22.752085] scsi3 : ahci [ 22.752350] ata1: SATA max UDMA/133 cmd 0xffffc200005ec100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.752357] ata2: SATA max UDMA/133 cmd 0xffffc200005ec180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.752363] ata3: SATA max UDMA/133 cmd 0xffffc200005ec200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 22.752369] ata4: SATA max UDMA/133 cmd 0xffffc200005ec280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 [ 23.237968] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 23.582849] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL240D, max UDMA/100 [ 23.582854] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 23.583711] ata1.00: configured for UDMA/100 [ 23.897011] ata2: SATA link down (SStatus 0 SControl 300) [ 24.208557] ata3: SATA link down (SStatus 0 SControl 300) [ 24.520107] ata4: SATA link down (SStatus 0 SControl 300) [ 24.519855] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL24 PQ: 0 ANSI: 5 [ 24.520480] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.520620] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 24.521093] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 24.521126] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 [ 24.580227] usb usb1: configuration #1 chosen from 1 choice [ 24.580425] hub 1-0:1.0: USB hub found [ 24.580439] hub 1-0:1.0: 2 ports detected [ 24.688089] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 24.688230] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 24.688586] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 24.688610] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 [ 24.747899] usb usb2: configuration #1 chosen from 1 choice [ 24.748100] hub 2-0:1.0: USB hub found [ 24.748113] hub 2-0:1.0: 2 ports detected [ 24.855882] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.856023] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 24.856398] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 24.856422] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 [ 24.915840] usb usb3: configuration #1 chosen from 1 choice [ 24.916076] hub 3-0:1.0: USB hub found [ 24.916089] hub 3-0:1.0: 2 ports detected [ 25.023670] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 25.023813] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 25.024213] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 25.024234] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 [ 25.083462] usb usb4: configuration #1 chosen from 1 choice [ 25.083705] hub 4-0:1.0: USB hub found [ 25.083717] hub 4-0:1.0: 2 ports detected [ 25.174801] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 25.191491] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [ 25.191634] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 25.192070] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 25.192091] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 [ 25.251458] usb usb5: configuration #1 chosen from 1 choice [ 25.251757] hub 5-0:1.0: USB hub found [ 25.251769] hub 5-0:1.0: 2 ports detected [ 25.360167] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 25.360181] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.360194] SB600_PATA: chipset revision 0 [ 25.360196] SB600_PATA: not 100% native mode: will probe irqs later [ 25.360207] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [ 25.360219] Probing IDE interface ide0... [ 25.395891] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.397994] usb 2-1: configuration #1 chosen from 1 choice [ 25.398006] sd 0:0:0:0: [sda] Write Protect is off [ 25.398009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.398875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.400872] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.402827] sd 0:0:0:0: [sda] Write Protect is off [ 25.402830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.415820] usbcore: registered new interface driver hiddev [ 25.416870] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.416880] sda:<6>input: USB Wheel Mouse as /class/input/input2 [ 25.421099] input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:13.1-1 [ 25.421118] usbcore: registered new interface driver usbhid [ 25.421122] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.481628] sda1 sda2 sda3 < sda5 > [ 25.509477] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.514452] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.857577] Attempting manual resume [ 25.857582] swsusp: Resume From Partition 8:5 [ 25.857584] PM: Checking swsusp image. [ 25.857896] PM: Resume from disk failed. [ 25.907735] kjournald starting. Commit interval 5 seconds [ 25.907399] EXT3-fs: mounted filesystem with ordered data mode. [ 26.098206] hda: PBDS DVD+/-RW DS-8W1P, ATAPI CD/DVD-ROM drive [ 26.772864] hda: selected mode 0x42 [ 26.773883] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 26.800163] b44.c:v1.01 (Jun 16, 2006) [ 26.800200] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 26.799895] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [ 26.800187] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 26.800262] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 26.801149] ehci_hcd 0000:00:13.5: debug port 1 [ 26.801472] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 [ 26.801786] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.801921] usb usb6: configuration #1 chosen from 1 choice [ 26.801951] hub 6-0:1.0: USB hub found [ 26.801959] hub 6-0:1.0: 10 ports detected [ 26.803751] usb 2-1: USB disconnect, address 2 [ 26.804283] eth0: Broadcom 4400 10/100BaseT Ethernet 00:1c:23:a2:47:82 [ 27.499795] usb 2-1: new low speed USB device using ohci_hcd and address 3 [ 27.726663] usb 2-1: configuration #1 chosen from 1 choice [ 27.734754] input: USB Wheel Mouse as /class/input/input3 [ 27.734775] input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:13.1-1 [ 34.836241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.839003] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.321079] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 35.430469] input: PC Speaker as /class/input/input4 [ 35.533182] sdhci: Secure Digital Host Controller Interface driver [ 35.533186] sdhci: Copyright(c) Pierre Ossman [ 35.533246] sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) [ 35.533273] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 35.533549] mmc0: SDHCI at 0xc0302000 irq 20 DMA [ 35.823045] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.823056] Uniform CD-ROM driver Revision: 3.20 [ 36.023928] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [ 36.059069] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 36.105661] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.658812] lp: driver loaded but no devices found [ 37.742979] ndiswrapper version 1.45 loaded (smp=yes) [ 37.821482] usbcore: registered new interface driver ndiswrapper [ 37.892092] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 38.249579] EXT3 FS on sda2, internal journal
# dmidecode 2.9 SMBIOS 2.4 present. 37 structures occupying 1293 bytes. Table at 0x000F0420. Handle 0xDA00, DMI type 218, 131 bytes OEM-specific Type Header and Data: DA 83 00 DA B0 00 92 1B 07 02 00 7D 00 00 00 00 00 80 01 16 00 01 00 7F 01 16 00 00 00 75 01 75 01 01 00 76 01 76 01 01 00 2E 00 25 00 00 00 6E 00 25 00 01 00 2D 00 25 00 02 00 8A 01 48 00 01 00 89 01 48 00 00 00 9B 00 23 00 01 00 9C 00 23 00 00 00 14 01 46 00 00 00 15 01 46 00 01 00 16 01 46 00 02 00 94 01 47 00 01 00 93 01 47 00 00 00 EA 00 67 00 01 00 EB 00 67 00 00 00 FF FF 00 00 00 00 Handle 0x0001, DMI type 0, 24 bytes BIOS Information Vendor: Dell Inc. Version: 2.6.1 Release Date: 08/23/2006 Address: 0xE5860 Runtime Size: 108448 bytes ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported Handle 0x0002, DMI type 1, 27 bytes System Information Manufacturer: Dell Inc. Product Name: Vostro 1000 Version: Not Specified Serial Number: DRCG0F1 UUID: 44454C4C-5200-1043-8047-C4C04F304631 Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x0003, DMI type 2, 8 bytes Base Board Information Manufacturer: Dell Inc. Product Name: 0WY383 Version: Serial Number: .DRCG0F1.CN4864379E7426. Handle 0x0004, DMI type 3, 17 bytes Chassis Information Manufacturer: Dell Inc. Type: Portable Lock: Not Present Version: Not Specified Serial Number: DRCG0F1 Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0005, DMI type 4, 35 bytes Processor Information Socket Designation: Socket M2/S1G1 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 81 0F 06 00 FF FB 8B 17 Signature: Family 15, Model 104, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology) Version: Engineering Sample Voltage: 1.4 V External Clock: 200 MHz Max Speed: 4000 MHz Current Speed: 1700 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: Not Provided L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Pipeline Burst Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0007, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J28 Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Microphone In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Speaker Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0011, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0012, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0013, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Disabled Description: ATI RS485M Handle 0x0014, DMI type 10, 6 bytes On Board Device Information Type: Sound Status: Disabled Description: Sigmatel Handle 0x0015, DMI type 11, 5 bytes OEM Strings String 1: Dell System String 2: 5 String 3: 13 Handle 0x0016, DMI type 12, 5 bytes System Configuration Options Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS Handle 0x0017, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x0018, DMI type 15, 29 bytes System Event Log Area Length: 16 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x00000000 Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0019, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 1 Locator: DIMM_A Bank Locator: <BAD INDEX> Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 2 Locator: DIMM_B Bank Locator: <BAD INDEX> Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001C, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001D, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x0019 Partition Width: 0 Handle 0x001E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001D Partition Row Position: 2 Interleave Position: 1 Interleaved Data Depth: 6 Handle 0x001F, DMI type 22, 26 bytes Portable Battery Location: System Battery Bay Manufacturer: Sanyo DELLTM7877 Name: Sanyo DELLTM7877 Chemistry: Lithium Ion Design Capacity: 29000 mWh Design Voltage: 14800 mV SBDS Version: Bat123 Maximum Error: Unknown SBDS Serial Number: 0021 SBDS Manufacture Date: 1980-00-00 OEM-specific Information: 0x00000000 Handle 0x0020, DMI type 32, 20 bytes System Boot Information Status: <OUT OF SPEC> Handle 0xB100, DMI type 177, 12 bytes OEM-specific Type Header and Data: B1 0C 00 B1 02 00 00 00 00 00 00 00 Handle 0xD000, DMI type 208, 10 bytes OEM-specific Type Header and Data: D0 0A 00 D0 01 05 FE 00 2A 02 Handle 0xD400, DMI type 212, 17 bytes OEM-specific Type Header and Data: D4 11 00 D4 70 00 71 00 00 10 2D 2E FF FF 00 00 00 Handle 0x0024, DMI type 127, 4 bytes End Of Table
