On Mon, 29 Oct 2007, Bjorn Helgaas wrote: > 0000-001f : dma1 <-- built-in resource includes 2 controllers > 0000-000f : 00:02 <-- PNP reports only one DMA controller [...] > 0060-006f : keyboard <-- built-in resource groups several things > 0060-0060 : 00:04 <-- PNP reports 8042 controller data register > 0061-0061 : 00:03 <-- PNP reports AT-style speaker > 0064-0064 : 00:04 <-- PNP reports 8042 controller status register Note that the built-in resources are requested according to how the PC/AT architecture defined address decoding for the relevant subsystems. In particular, there was always a single DMA controller at 0x0000 and the 8042 controller was decoded at 0x0060. No full decoding was done and unused locations aliased to the corresponding ones with the don't-care bits set to the other value. I do not recall all the details of the port B (named after the original from the 8255 as used in the PC/XT) at 0x0061 as implemented in the PC/AT and I do not have a reference handy, but it is a bunch of GPIO bits, some being r/o and some r/w, possibly with side-effects. I believe it was a set of additional latches sub-decoded from the 8042 controller range for compatibility with how the 8255 was wired and programmed. Anyway, PNP may provide a more accurate picture of the address ranges in a particular system... if it gets it right! Which is a lost hope, I suppose, as even the above is questionable -- "AT-style speaker" is a misnomer as most of the GPIO bits involved deal with the handling of system error interrupts normally routed to NMI. The patch itself is useful and makes sense though. Have you passed it through `scripts/checkpatch.pl'? Maciej - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
