On Wednesday, 31 October 2007 03:27, Len Brown wrote:
> It would be interseting if any of the folks having power consumption
> problems when suspended see an improvement with this patch.
>
> Are there plans to refresh this patch and get it upstream?
>
> Acked-by: Len Brown <len.brown@xxxxxxxxx>
There was a discussion regarding this patch, IIRC, and it was argued that
_PSx are only applicable to IDE/PATA devices.
I wonder if this has been addressed.
Greetings,
Rafael
> On Thursday 20 September 2007 22:17, Shaohua Li wrote:
> > On Fri, 2007-09-21 at 11:20 +0900, Tejun Heo wrote:
> > > Hello,
> > >
> > > Shaohua Li wrote:
> > > > + /* channel first and then drives for power on and verse versa for power off */
> > > > + if (state.event == PM_EVENT_ON)
> > > > + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
> > > > +
> > > > + if (ap->flags & ATA_FLAG_SLAVE_POSS)
> > > > + max_devices++;
> > >
> > > ata_port_max_devices()?
> > ok, fixed.
> > >
> > > > Index: linux/drivers/ata/libata-eh.c
> > > > ===================================================================
> > > > --- linux.orig/drivers/ata/libata-eh.c 2007-09-14 10:28:25.000000000 +0800
> > > > +++ linux/drivers/ata/libata-eh.c 2007-09-21 08:56:40.000000000 +0800
> > > > @@ -2349,6 +2349,7 @@ static void ata_eh_handle_port_suspend(s
> > > > if (ap->ops->port_suspend)
> > > > rc = ap->ops->port_suspend(ap, ap->pm_mesg);
> > > >
> > > > + ata_acpi_set_state(ap, PMSG_SUSPEND);
> > > > out:
> > > > /* report result */
> > > > spin_lock_irqsave(ap->lock, flags);
> > > > @@ -2394,6 +2395,8 @@ static void ata_eh_handle_port_resume(st
> > > >
> > > > WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
> > > >
> > > > + ata_acpi_set_state(ap, PMSG_ON);
> > > > +
> > > > if (ap->ops->port_resume)
> > > > rc = ap->ops->port_resume(ap);
> > >
> > > Can these be moved into ata_acpi_on_suspend() and ata_acpi_on_resume()?
> > > Or do they have to be placed on the other side of ->port_suspend/resume
> > > callbacks?
> > I suppose _PSx will shutdown ports. So I want to do PS3 as later as
> > possible in suspend, and vice versa in resume.
> >
> > Thanks,
> > Shaohua
> >
> >
> > ---
> > drivers/ata/libata-acpi.c | 34 ++++++++++++++++++++++++++++++++++
> > drivers/ata/libata-eh.c | 3 +++
> > drivers/ata/libata.h | 2 ++
> > 3 files changed, 39 insertions(+)
> >
> > Index: linux/drivers/ata/libata-acpi.c
> > ===================================================================
> > --- linux.orig/drivers/ata/libata-acpi.c 2007-09-21 09:23:13.000000000 +0800
> > +++ linux/drivers/ata/libata-acpi.c 2007-09-21 10:13:32.000000000 +0800
> > @@ -523,6 +523,39 @@ void ata_acpi_on_resume(struct ata_port
> > }
> >
> > /**
> > + * ata_acpi_set_state - set the port power state
> > + * @ap: target ATA port
> > + * @state: state, on/off
> > + *
> > + * This function executes the _PS0/_PS3 ACPI method to set the power state.
> > + * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
> > + */
> > +void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
> > +{
> > + int max_devices, i;
> > +
> > + if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
> > + return;
> > +
> > + /* channel first and then drives for power on and verse versa for power off */
> > + if (state.event == PM_EVENT_ON)
> > + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
> > +
> > + max_devices = ata_port_max_devices(ap);
> > +
> > + for (i = 0; i < max_devices; ++i) {
> > + struct ata_device *dev = &ap->device[i];
> > +
> > + if (dev->acpi_handle)
> > + acpi_bus_set_power(dev->acpi_handle,
> > + state.event == PM_EVENT_ON ?
> > + ACPI_STATE_D0: ACPI_STATE_D3);
> > + }
> > + if (state.event != PM_EVENT_ON)
> > + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
> > +}
> > +
> > +/**
> > * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
> > * @dev: target ATA device
> > *
> > Index: linux/drivers/ata/libata-eh.c
> > ===================================================================
> > --- linux.orig/drivers/ata/libata-eh.c 2007-09-21 09:23:13.000000000 +0800
> > +++ linux/drivers/ata/libata-eh.c 2007-09-21 10:09:10.000000000 +0800
> > @@ -2349,6 +2349,7 @@ static void ata_eh_handle_port_suspend(s
> > if (ap->ops->port_suspend)
> > rc = ap->ops->port_suspend(ap, ap->pm_mesg);
> >
> > + ata_acpi_set_state(ap, PMSG_SUSPEND);
> > out:
> > /* report result */
> > spin_lock_irqsave(ap->lock, flags);
> > @@ -2394,6 +2395,8 @@ static void ata_eh_handle_port_resume(st
> >
> > WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
> >
> > + ata_acpi_set_state(ap, PMSG_ON);
> > +
> > if (ap->ops->port_resume)
> > rc = ap->ops->port_resume(ap);
> >
> > Index: linux/drivers/ata/libata.h
> > ===================================================================
> > --- linux.orig/drivers/ata/libata.h 2007-09-21 09:23:13.000000000 +0800
> > +++ linux/drivers/ata/libata.h 2007-09-21 10:09:10.000000000 +0800
> > @@ -102,11 +102,13 @@ extern void ata_acpi_associate(struct at
> > extern int ata_acpi_on_suspend(struct ata_port *ap);
> > extern void ata_acpi_on_resume(struct ata_port *ap);
> > extern int ata_acpi_on_devcfg(struct ata_device *adev);
> > +extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
> > #else
> > static inline void ata_acpi_associate(struct ata_host *host) { }
> > static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
> > static inline void ata_acpi_on_resume(struct ata_port *ap) { }
> > static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
> > +static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) { }
> > #endif
> >
> > /* libata-scsi.c */
> >
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
"Premature optimization is the root of all evil." - Donald Knuth
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
