-------- Forwarded Message --------
From: Jean Delvare <jdelvare@xxxxxxx>
To: Thomas Renninger <trenn@xxxxxxx>
Subject: [PATCH 3/3] Check for ACPI resource conflicts in i2c bus
drivers
Date: Sun, 21 Oct 2007 15:11:12 +0200
Check for ACPI resource conflicts in i2c bus drivers. I've included
all recent SMBus master drivers for PC hardware.
I've voluntarily left out:
* Drivers that don't run on PCs: they can't conflict with ACPI.
* Bit-banged bus device drivers: it's very unlikely that ACPI would
deal with such buses.
Signed-off-by: Jean Delvare <jdelvare@xxxxxxx>
---
drivers/i2c/busses/i2c-ali1535.c | 6 ++++++
drivers/i2c/busses/i2c-ali1563.c | 5 +++++
drivers/i2c/busses/i2c-ali15x3.c | 5 +++++
drivers/i2c/busses/i2c-amd756.c | 6 ++++++
drivers/i2c/busses/i2c-amd8111.c | 5 +++++
drivers/i2c/busses/i2c-i801.c | 5 +++++
drivers/i2c/busses/i2c-nforce2.c | 6 ++++++
drivers/i2c/busses/i2c-piix4.c | 4 ++++
drivers/i2c/busses/i2c-sis5595.c | 6 ++++++
drivers/i2c/busses/i2c-sis630.c | 6 ++++++
drivers/i2c/busses/i2c-sis96x.c | 5 +++++
drivers/i2c/busses/i2c-viapro.c | 5 +++++
12 files changed, 64 insertions(+)
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-ali1535.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-ali1535.c 2007-10-21 14:44:46.000000000 +0200
@@ -61,6 +61,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
@@ -159,6 +160,11 @@ static int ali1535_setup(struct pci_dev
goto exit;
}
+ retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+ ali1535_driver.name);
+ if (retval)
+ goto exit;
+
if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-ali1563.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-ali1563.c 2007-10-21 14:44:46.000000000 +0200
@@ -21,6 +21,7 @@
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#define ALI1563_MAX_TIMEOUT 500
#define ALI1563_SMBBA 0x80
@@ -345,6 +346,10 @@ static int __devinit ali1563_setup(struc
}
}
+ if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name))
+ goto Err;
+
if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
ali1563_pci_driver.name)) {
dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-ali15x3.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-ali15x3.c 2007-10-21 14:44:46.000000000 +0200
@@ -68,6 +68,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* ALI15X3 SMBus address offsets */
@@ -166,6 +167,10 @@ static int ali15x3_setup(struct pci_dev
if(force_addr)
ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
+ if (acpi_check_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+ ali15x3_driver.name))
+ return -EBUSY;
+
if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
ali15x3_driver.name)) {
dev_err(&ALI15X3_dev->dev,
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-amd756.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-amd756.c 2007-10-21 14:44:46.000000000 +0200
@@ -45,6 +45,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* AMD756 SMBus address offsets */
@@ -364,6 +365,11 @@ static int __devinit amd756_probe(struct
amd756_ioport += SMB_ADDR_OFFSET;
}
+ error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
+ amd756_driver.name);
+ if (error)
+ return error;
+
if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
amd756_ioport);
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-amd8111.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-amd8111.c 2007-10-21 14:44:46.000000000 +0200
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
@@ -359,6 +360,10 @@ static int __devinit amd8111_probe(struc
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
+ error = acpi_check_resource_conflict(&dev->resource[0]);
+ if (error)
+ goto out_kfree;
+
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
error = -EBUSY;
goto out_kfree;
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-i801.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-i801.c 2007-10-21 14:44:46.000000000 +0200
@@ -52,6 +52,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* I801 SMBus address offsets */
@@ -588,6 +589,10 @@ static int __devinit i801_probe(struct p
goto exit;
}
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err)
+ goto exit;
+
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-nforce2.c 2007-10-21 14:21:51.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-nforce2.c 2007-10-21 14:44:46.000000000 +0200
@@ -50,6 +50,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
@@ -315,6 +316,11 @@ static int __devinit nforce2_probe_smb (
smbus->size = 64;
}
+ error = acpi_check_region(smbus->base, smbus->size,
+ nforce2_driver.name);
+ if (error)
+ return -1;
+
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
smbus->base, smbus->base+smbus->size-1, name);
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-piix4.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-piix4.c 2007-10-21 14:44:46.000000000 +0200
@@ -40,6 +40,7 @@
#include <linux/init.h>
#include <linux/apm_bios.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
#include <asm/io.h>
@@ -151,6 +152,9 @@ static int __devinit piix4_setup(struct
}
}
+ if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+ return -EBUSY;
+
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
piix4_smba);
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-sis5595.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-sis5595.c 2007-10-21 14:44:46.000000000 +0200
@@ -62,6 +62,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
static int blacklist[] = {
@@ -174,6 +175,11 @@ static int sis5595_setup(struct pci_dev
/* NB: We grab just the two SMBus registers here, but this may still
* interfere with ACPI :-( */
+ retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name);
+ if (retval)
+ return retval;
+
if (!request_region(sis5595_base + SMB_INDEX, 2,
sis5595_driver.name)) {
dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-sis630.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-sis630.c 2007-10-21 14:44:46.000000000 +0200
@@ -55,6 +55,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* SIS630 SMBus registers */
@@ -433,6 +434,11 @@ static int sis630_setup(struct pci_dev *
dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
+ retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ sis630_driver.name);
+ if (retval)
+ goto exit;
+
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
sis630_driver.name)) {
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-sis96x.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-sis96x.c 2007-10-21 14:44:46.000000000 +0200
@@ -40,6 +40,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* base address register in PCI config space */
@@ -286,6 +287,10 @@ static int __devinit sis96x_probe(struct
dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
sis96x_smbus_base);
+ retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
+ if (retval)
+ return retval;
+
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
sis96x_driver.name)) {
--- linux-2.6.24-rc0.orig/drivers/i2c/busses/i2c-viapro.c 2007-10-21 14:21:50.000000000 +0200
+++ linux-2.6.24-rc0/drivers/i2c/busses/i2c-viapro.c 2007-10-21 14:44:46.000000000 +0200
@@ -49,6 +49,7 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/acpi.h>
#include <asm/io.h>
static struct pci_dev *vt596_pdev;
@@ -349,6 +350,10 @@ static int __devinit vt596_probe(struct
}
found:
+ error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
+ if (error)
+ return error;
+
if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
vt596_smba);
--
Thomas Renninger
Research and Developement Departement
SUSE LINUX Products GmbH,
Maxfeldstr. 5, D - 90409 Nürnberg
Phone: +49 (0)911 - 740 53 675
e-mail: trenn@xxxxxxx
SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg)
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
