Re: halt does not shut the system down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alexey Starikovskiy wrote:

John Sigler wrote:

Alexey Starikovskiy wrote:

John Sigler wrote:

         +===================================+
         | Soft-Off by PWR-BTTN              |
         |-----------------------------------|
         | Instant-Off  ..... [v]            |
         | Delay 4 Sec. ..... [ ]            |
         |                                   |
         |-----------------------------------|
         |  ^V:Move ENTER:Accept ESC:Abort   |
         +===================================+

'Instant-Off' is the appropriate setting, right?

Actually, default should be 4 sec delay. OS should have a chance to
shut down the system...

I don't see why this setting would have an impact on the outcome
of the 'halt' and 'poweroff' commands.

Well, it is not possible to tell, what BIOS writer have connected to this flag...

(It sucks to be stuck with a closed proprietary BIOS.)

I tested the other setting, and it didn't change anything.
The system remains powered on after executing poweroff.

Len: the system is 100% Intel (Intel CPU, Intel north bridge, Intel south bridge, Intel integrated network controllers). Have Intel engineers run into the same problem on a similar platform?

http://bugzilla.kernel.org/show_bug.cgi?id=9148

Regards.
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux