Re: Serial ATA does not find partitions (Hitachi HD, new? ATI controller) where old SATA works

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hernan G Solari wrote:
>>>   netconsole, pritty nice debunging system... but (yes, there is always
>>> a but) it does not get to run.
>>>   the method was well implemented, adding the acpi=off it sends the
>>> information to the receiving machine (I can even see passing a
>>> netconsole probing message in the machine under testing), but without
>>> turning off acpi it does not reach the point of loading and,
>>> consequently, it does not send a byte to the receiving machine.
>>>
>>> Hence, result: empty output.
>>>    
>>>
>> Hmmm.. Are netconsole support and network driver built into the kernel?
>>
> yes, they are

If you can set up a serial console, it would be better.  If not, can you
please take a photo of the crash and post it?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux