Do you have CONFIG_ACPI_SLEEP enabled in your .config? Andrew Morton wrote: > On Tue, 25 Sep 2007 08:51:09 +0200 Damien Wyart <damien.wyart@xxxxxxx> wrote: > >> Hello, >> >> After testing rc8, I noticed that I couldn't power off the computer >> directly, it only got halted and I had to press the power button >> manually. Just before displaying "System halted", the following message >> is displayed: >> >> ACPI : PCI interrupt for device 0000:02:08.0 disabled >> >> I had to first revert 5a50fe709d527f31169263e36601dd83446d5744 then >> f216cc3748a3a22c2b99390fddcdafa0583791a2 (handling of Sx states) to >> recover previous behaviour. > > Let's add some cc's. > >> Attached are the dmesg for rc7, rc8 and rc8 with the two patches >> reverted. > > "diff -u dmesg.rc8_revert dmesg.rc8" says: > > --- dmesg.rc8_revert 2007-09-25 00:31:33.000000000 -0700 > +++ dmesg.rc8 2007-09-25 00:31:30.000000000 -0700 > @@ -1,4 +1,4 @@ > -Linux version 2.6.23-rc8-25092007dw (root@brouette) (gcc version 4.2.1 (Debian 4.2.1-5)) #2 SMP Tue Sep 25 08:31:09 CEST 2007 > +Linux version 2.6.23-rc8-25092007dw (root@brouette) (gcc version 4.2.1 (Debian 4.2.1-5)) #1 SMP Tue Sep 25 07:27:10 CEST 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > @@ -72,18 +72,18 @@ > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > -Memory: 2074780k/2096592k available (2175k kernel code, 20712k reserved, 815k data, 192k init, 1179088k highmem) > +Memory: 2074780k/2096592k available (2175k kernel code, 20712k reserved, 816k data, 192k init, 1179088k highmem) > virtual kernel memory layout: > fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc03f0000 - 0xc0420000 ( 192 kB) > - .data : 0xc031fd5c - 0xc03ebd04 ( 815 kB) > - .text : 0xc0100000 - 0xc031fd5c (2175 kB) > + .data : 0xc031fcd4 - 0xc03ebd04 ( 816 kB) > + .text : 0xc0100000 - 0xc031fcd4 (2175 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 > -Calibrating delay using timer specific routine.. 5987.66 BogoMIPS (lpj=2993833) > +Calibrating delay using timer specific routine.. 5987.60 BogoMIPS (lpj=2993802) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000 > monitor/mwait feature present. > @@ -104,7 +104,7 @@ > Booting processor 1/1 eip 2000 > CPU 1 irqstacks, hard=c0426000 soft=c0424000 > Initializing CPU#1 > -Calibrating delay using timer specific routine.. 5984.18 BogoMIPS (lpj=2992093) > +Calibrating delay using timer specific routine.. 5984.16 BogoMIPS (lpj=2992084) > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000 > monitor/mwait feature present. > CPU: Trace cache: 12K uops, L1 D cache: 16K > @@ -116,7 +116,7 @@ > CPU1: Intel P4/Xeon Extended MCE MSRs (12) available > CPU1: Thermal monitoring enabled > CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 > -Total of 2 processors activated (11971.85 BogoMIPS). > +Total of 2 processors activated (11971.77 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > @@ -279,6 +279,7 @@ > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 192k freed > +input: PC Speaker as /devices/platform/pcspkr/input/input4 > sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > @@ -287,7 +288,6 @@ > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > -input: PC Speaker as /devices/platform/pcspkr/input/input4 > parport_pc 00:0a: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] > USB Universal Host Controller Interface driver v3.0 > @@ -299,46 +299,42 @@ > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > -ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 > -PCI: Setting latency timer of device 0000:00:1d.1 to 64 > -uhci_hcd 0000:00:1d.1: UHCI Host Controller > -uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > -uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 > +ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 > +PCI: Setting latency timer of device 0000:00:1d.7 to 64 > +ehci_hcd 0000:00:1d.7: EHCI Host Controller > +ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > +ehci_hcd 0000:00:1d.7: debug port 1 > +PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > +ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80800 > +ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > -hub 2-0:1.0: 2 ports detected > +hub 2-0:1.0: 8 ports detected > +ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 > +PCI: Setting latency timer of device 0000:00:1d.1 to 64 > +uhci_hcd 0000:00:1d.1: UHCI Host Controller > +uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > +uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ff60 > +usb usb3: configuration #1 chosen from 1 choice > +hub 3-0:1.0: USB hub found > +hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > -uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > +uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000ff40 > -usb usb3: configuration #1 chosen from 1 choice > -hub 3-0:1.0: USB hub found > -hub 3-0:1.0: 2 ports detected > -usb 1-1: new full speed USB device using uhci_hcd and address 2 > +usb usb4: configuration #1 chosen from 1 choice > +hub 4-0:1.0: USB hub found > +hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > -uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > +uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ff20 > -usb usb4: configuration #1 chosen from 1 choice > -hub 4-0:1.0: USB hub found > -hub 4-0:1.0: 2 ports detected > -ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21 > -PCI: Setting latency timer of device 0000:00:1d.7 to 64 > -ehci_hcd 0000:00:1d.7: EHCI Host Controller > -ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 > -ehci_hcd 0000:00:1d.7: debug port 1 > -PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > -ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 > -ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > -usb 1-1: configuration #1 chosen from 1 choice > -usb 1-1: can't set config #1, error -71 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > -hub 5-0:1.0: 8 ports detected > -usb 1-1: USB disconnect, address 2 > -usb 1-1: new full speed USB device using uhci_hcd and address 3 > +hub 5-0:1.0: 2 ports detected > +usb 1-1: new full speed USB device using uhci_hcd and address 2 > usb 1-1: configuration #1 chosen from 1 choice > Adding 1212896k swap on /dev/sdb7. Priority:-1 extents:1 across:1212896k > EXT3 FS on sdb2, internal journal > - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
